跳到主要內容

臺灣博碩士論文加值系統

(44.192.22.242) 您好!臺灣時間:2021/08/01 11:43
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:潘俊豪
論文名稱:燃料電池混成電動機車控制與硬體嵌入式即時模擬
指導教授:洪哲文洪哲文引用關係
學位類別:碩士
校院名稱:國立清華大學
系所名稱:動力機械工程學系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2004
畢業學年度:92
語文別:中文
論文頁數:56
中文關鍵詞:燃料電池系統燃料電池混成電動機車硬體嵌入式模擬
相關次數:
  • 被引用被引用:0
  • 點閱點閱:127
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本論文主要推導燃料電池混成電動機車各子系統之動態模式,整合建立模擬軟體,並設計控制策略,以硬體嵌入式作成整車縱向動態即時控制模擬。

理論方面,根據燃料電池結構,利用基礎熱流與電化學公式,建立燃料電池各子系統之動態數學模式,目前建立燃料電池子系統,包括空氣管理系統、溫度管理系統、與燃料供應系統。建構完整燃料電池系統之後,確立整車各個系統元件之動態,藉由規則庫控制策略將整車系統能量規劃分配,使行車能盡量達成最小耗能。

而在實作部分,則以Motorola的MC68376晶片為基礎,將控制策略載入晶片,結合原本Matlab/Simulink所建立之整車模式,整合成為硬體嵌入式即時模擬系統(hardware-in-the-loop simulation system)。完成不同行車型態下,燃料電池混成機車之即時控制與動態性能模擬。
參考文獻
[1]Amphlett, J. C., Mann, R. F., Peppiey, B. A., Roberge, P. R., Rodrigues, A., “A Model Predicting Transient Response of Proton Exchange Membrane Fuel Cells,” Journal of Power Source, pp.183-188, 1996.
[2]林博煦, “燃料電池電動機車即時模擬與控制,”清華大學動力機械研究所論文,2002。
[3]Friedman, D.J., “Maximizing Direct-hydrogen PEM Fuel Cell Vehicle Efficiency-Is Hybridization Necessary ? ” SAE Publication Fuel Cell Power for Transportation, 9-17, 1999.
[4]Rodatz, P., Guzzella, L., and Pellizzari, L., “System Design and Supervisory Controller Development for a Fuel-Cell Vehicle,”1 International Federation of Automatic Control Conference on Mechatronic System, 1,173-178,2000.
[5]Paul, A., Stephen, G., Douglas, J.N., “Degree of Hybridization Modeling of a Fuel Cell Hybrid Electric Sport Utility Vehicle,” Fuel Cell Power for Transportation 2001.
[6]Sadler, M., Stapleton, A.J., Heath, R.P.G., Jackson, N.S., “Application of Modeling Techniques to the Design and Development of Fuel Cell Vehicle Systems,” SAE 2000 World Congress Detroit, Michigan, March 5-8, 2001-01-0542.
[7]Pukrushpan, J. T., Stefanopulou, A. G., Peng, H., “Modeling and Control for PEM Fuel Cell Stack System,” Proceedings of the American Control Conference, Anchorage, May 8-10, 2002.
[8]Lee, H.S., Jeong, K.S., Oh, B.S., “An Experimental Study of Controlling Strategies and Drive Forces for Hydrogen Fuel Cell Hybrid Vehicles,” International Journal of Hydrogen Energy Vol.28, pp.215-222, 2003.
[9]Cikanek, S. R., Bailey, K. E., Powell, B. K., “Parallel Hybrid Electric Vehicle Dynamic Model and Powertrain Control,” Proceedings of the American Control Conference, Vol.1, pp.684 –688, 1997.
[10]Schaffnit, J., Sinsel, S., Isermann, R., “Hardware-in-the-Loop Simulation for the Investigation of Truck Diesel Injection Systems”, Proceedings of the American Control Conference, Volume 1, pp.498-502, 1998.
[11]Brennan, S., Alleyne, A., DePoorter, M., “The Illinois Roadway Simulator-a Hardware-in-the-Loop Testbed for Vehicle Dynamics and Control”, Proceedings of the American Control Conference, Volume 1, pp.493-497, 1998.
[12]Raman, S., Sivashankar, N., Milam, W., Stuart, W., Nabi, S., “Design and Implementation of HIL Simulators for Powertrain Control System software development”, Proceedings of the American Control Conference, Volume 1, pp.709-713, 1999.
[13]Yamazaki, M., Suresheshbabu, S., Loftus, M., Crandell, R., Brackx, M., “Analysis of Automatically Generated Vehicle System Control Software in a HIL Environment,” Proceedings of the American Control Conference, pp.3135-3140, 2002.
[14]Guzzella, L., “Control Oriented Modeling of Fuel-Cell Based Vehicle,” Presentation in NSF Workshop on the Integration of Modeling and Control for Automotive Systems, 1999.
[15]Blomen, L.J.M.J., Mugerwa, M.N., “Fuel Cell Systems,” Plenum Press, 1993.
[16]Amphlett, J.C., Baumert, R.M., Mann, R.F., Peppley, B.A., Roberge, P.R., Harries, T.J., “Performance Modeling of the Ballard Mark-IV Solid Polymer Electrolyte Fuel Cell,” Journal of Electrochemical Society, pp.9-15, 1995.
[17]Marr, C., Li, X., “An Engineering Model of Proton Exchange Membrane Fuel Cell Performance,” A Interdisciplinary Journal of Physical on Engineering Sciences,Vol. 50,Issue 4, pp.190-200, 1998.
[18]Rongzhong, J., Deryn, C., “Comparative Studies of Polymer Electrolyte Membrane Fuel Cell Stack,” International Journal of Hydrogen Energy,Vol.24, pp.1107-1115, 1999.
[19]黃逸群, “燃料電池與直噴式引擎作為混成電動機車動力源分析,” 清華大學動力機械研究所論文,2001。
[20]Moraal, P., Kolmanovsky, I., “Turbocharger Modeling for Automotive Control Application,” SAE Paper 1999-01-0908.
[21]Askri, F., Jemni*, A., Nasrallah, S.B., “Prediction of Transient Heat and Mass Transfer in a Closed Metal-Hydrogen Reactor,” International Journal of Hydrogen Energy 29, pp.195-208, 2004.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top