跳到主要內容

臺灣博碩士論文加值系統

(54.92.164.9) 您好!臺灣時間:2022/01/23 03:56
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:鍾尚儒
研究生(外文):Shang-Ju Chung
論文名稱:聚甲基丙烯酸甲酯奈米中空粒子之製備及分析
論文名稱(外文):Preparation and Characterization of PolyMethyl Methacrylate Hollow Nanoparticles
指導教授:袁維勵
指導教授(外文):Wei-Li Yuan
學位類別:碩士
校院名稱:逢甲大學
系所名稱:化學工程學所
學門:工程學門
學類:化學工程學類
論文種類:學術論文
論文出版年:2005
畢業學年度:93
語文別:中文
論文頁數:61
中文關鍵詞:奈米中空球苯乙烯甲基丙烯酸甲酯
外文關鍵詞:hollow sphereMethyl MethacrylateStyrene
相關次數:
  • 被引用被引用:1
  • 點閱點閱:189
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
聚合物微球可應用於塗料、紙張的表面加工、黏著劑、塑料添加物、建築材料等方面。近幾年科技的發展,微球在醫療、醫藥及生物化學等有了更近一步的應用。微小中空粒子之合成,可概略分為硬模板法及軟模板法。硬模板指的是某種固體而軟模板則為液體或氣體。
  本研究以發泡微胞作為軟模板以形成中空聚甲基丙烯酸甲酯及聚苯乙烯粒子。首先將單體及油類均勻混合,取定量加入濃度為0.5、1.5、4及12 CMC之界面活性劑水溶液中,使其藉由擴散進入界面活性劑的微胞中並形成微小顆粒。靜置一段時間後,再加入起始劑並在50、60及75 ℃進行聚合反應4小時之後。此時油類因加熱而由液體轉變為氣體形成發泡微胞。聚合後的成品再經由TEM、SEM等儀器檢測後,觀察所製備之粒子尺寸及形態。本研究探討是否能藉由加熱使單體聚合及油類汽化,從而在球體內形成中空結構,並比較在不同CMC及溫度條件下粒徑分布的情形。
Polymer microspheres could be used in paintings, surface furnishing of paper, adhesives, additives of plastics, construction materials, etc.. In recent years, microspheres have been further applied to medical treatment, medicine, and biochemistry owing to technonolgy advancement. Synthesis of hollow microspheres requires either hard or soft templates. The former refers to a solid and the latter, a liquid or gas.

The thesis reports the syntheses of hollow poly(methyl methacrylate) and polystyrene microspheres by bubbled micelles. Firstly, monomers and oil are mixed and added separately into surfactant solutions of 0.5, 1.5, 4.0, and 12.0 CMC to let them diffuse into the micelles and form a microemulsion. After a while the initiator is added to start polymerizaiton at 50, 60, and 75℃ for 4 hours. The adsolubilized oil would then evaporate to form bubbled micelles due to heating. After polymerization, the products are examined under TEM, SEM, and DLS to characterize the particle size and morphologies. The thesis discusses whether heating could cause monomer polymerization as well as oil evaporation, thus leading to hollow structures inside the formed particles. Comparisons of particles size distribution prepared at different CMC’s and temperatures are also made.
摘要∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Ⅰ
英文摘要∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Ⅱ
目錄∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Ⅲ
圖目錄∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Ⅵ
表目錄∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Ⅸ

第一章 緒論
1.1 前言∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙1
1.2 文獻回顧∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙3
1.2.1 乳化聚合文獻回顧∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙3
1.2.2 中空微球文獻回顧∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙6
1.3 研究目的∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙11

第二章 實驗原理
2.1 發泡微胞聚合法的原理∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙12
2.1.1 單體∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙12
2.1.2 界面活性劑∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙13
2.1.2.1 陰離子型∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14
2.1.3 微胞∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙16
2.1.4 乳化∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙18
2.1.5 分散∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙19
2.1.6 起始劑∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙19
2.1.7 乳化聚合∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙21
2.1.8 微乳液聚合∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙22
2.1.9 發泡微胞聚合∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙24
2.2 發泡微胞聚合法的優缺點∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙25

第三章 實驗方法及步驟
3.1 實驗藥品∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙26
3.2 儀器∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙26
3.2.1 儀器分析∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙27
3.3 藥品基礎配方∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙29
3.4 實驗流程圖∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙30
3.4.1 乳化聚合流程圖∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙30
3.4.2 發泡微胞聚合流程圖∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙31
3.4.3 發泡微胞聚合法示意圖∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙32
3.5 實驗步驟∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙33
3.5.1 高分子PMMA中空粒子的製備∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙33
3.5.2 高分子PS中空粒子的製備∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙35

第四章 結果與討論
4.1高分子PMMA中空粒子的製備∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙38
4.1.1 界面活性劑濃度對PMMA粒徑的影響∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙44
4.1.2 聚合溫度對PMMA粒徑的影響∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙45
4.2高分子PS中空粒子的製備∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙47
4.2.1 界面活性劑濃度對PS粒徑的影響∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙50
4.2.2 聚合溫度對PS粒徑的影響∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙51

第五章 結論與建議
5.1 結論∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙53
5.2 建議∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙54
參考文獻∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙55
附錄一∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙60
〔1〕 江森淇,聚苯乙烯奈米粒子之製備及分析,逢甲大學化學工程學系碩士論文(2003)
〔2〕 馬光輝、蘇志國,新型高分子材料,化學工業出版社(2003)
〔3〕 F. Hofman, and K.Delbrück, A. G. Farbenfabriken Bayer (1909) Ger. Pat., 250, p. 690
〔4〕 R. P. Dinsmore (1929) U. S. Pat., 1, 732, p. 795
〔5〕 M. Luther, C. Henck (1932) U.S. Pat., 1, 864, p. 78
〔6〕 M. Luther, C. Henck (1932) U.S. Pat., 1, 860, p. 681
〔7〕 V. Balandina, K. Berezan, A. Dobromyslova, B. Dogadkin, M. Lapuk, (1936) Bull. Acad. Sci. U.S.S.R., Ser. 7, 379, p. 423
〔8〕 H. Fikentscher (1938) Angew. Chem., 54, p. 433
〔9〕 W. D. Harkins (1947) J. Am. Chem. Soc., 69, p. 1428
〔10〕 W. V. Smith and R. W. Ewart, J. Chem. Phys., 16, 592(1948).
〔11〕 W. V. Smith, J. Am. Chem. Soc., 70, 3695(1948).
〔12〕 J.Ugelstad and F. K. Hansen, Rubber Chem.Tech., 49, 536(1976).
〔13〕 J.L. Gardon, “Polymerization Process”, in C. E. Schildkncht(ed) , Emulsion Polymerization, Ch.6, Wiley Intersciences, New York, 1977.
〔14〕 J. L. Gardon, Interfacial Colloidal and Kinetic Aspects of Emulsion Polymerization, in F. Millich and C. E. Carraher, Tr (eds), Interfacial Synthesis, Vol.1, Ch.9, Marcel Dekker, New York, 1977.
〔15〕 B.S. Hawkett, D. H. Napper, R. G. Gilbert, J. Chem. Soc. Faraday, 73, 60(1977)
〔16〕 R. G. Gilbert and D. H. Napper, J. Chem. Soc., Faraday 1, 76, 23(1980).
〔17〕 W. Copper, Reactivity,Mechanism and Structure in Polymer Chemistry, in Interface Sci., New York, 1974.
〔18〕 W. D. Harkins, J. Chem. Phys., 13. 381(1945).
〔19〕 W. D. Harkins, J. Polym. Sci., 5. 217(1950).
〔20〕 F. K. Hansen, E. B. Ofstad and J. Ugelstad, Smith(ed.), Academic Press, New York, 13(1976).
〔21〕 F. K. Hansen and J. Ugelstad, J. Polym. Sci.: Polym. Chem. Ed., 7, 3069(1979)
〔22〕P. J. Feeney, D. H. Napper and R. G. Gilbert, Macromol., 17, 25(1984).
〔23〕 J. L. Gardon (1971) J. Polym. Sci., A-1, 9, p. 2763
〔24〕 M. Harada, M. Nomura, H. Kojima, W. Eguchi, S. Nagata (1972) J. Appl. Polym. Sci., 16, p. 811
〔24〕 G. L. Parts, D. E. Moore, J. G. Watterson (1965) Macromol. Chem. , 89, p. 456
〔25〕 G. L. Parts, D. E. Moore, J. G. Watterson (1965) Macromol. Chem., 89, p. 456
〔26〕 J. Ugelstad, P. C. Mork, J. O. Aasen (1967) J. Polym. Sci., A-1, 5, p. 2281
〔27〕 J. L. Gardon (1968) J. Polym. Sci., A-1, 6, p. 665
〔28〕 S. Katz, and G. M. Saidel (1966) Polym. Preprints, 7, p. 737
〔29〕 W. S. Zimmit (1959) J. Appl. Sci., 1, p. 323
〔30〕 R. D. Burkhart (1965) J. Polym. Sci., A-3, p. 883
〔31〕 E. Trommstdorff, H. Koble, and P. Leqally (1947) Macromol. Chem., 1, p. 169
〔32〕 M. A. Dube, A. Penlidis (1997) “Emulsion terpolymerization of butyl acrylate/methyl methacrylate/vinyl acetate: Experimental results”, J. Polym. Chem., A: Polym. Chem., 35, p. 1659
〔33〕 M. A. Dube, A. Penlidis (1995) Polym. Int., 37, p. 235
〔34〕 C. S. Chem, H. Hsu. (1995) J. Appl. Polym. Sci., 55, p. 571
〔35〕 A. Urretabizkaia, J. M. Asua (1994) J. Polym. Sci., A: Polym. Chem., 32, p. 1761
〔36〕 M. J. Unzue, J. M. Asua (1993) J. Appl. Polym. Sci., 49, p. 81
〔37〕 C. S. Chern, Y. C. Chen (1997) “Stability of the polymerizable surfactant stabilized latex particles during semibatch emulsion polymerization”, Colloid Polym. Sci., 275, p. 124
[38] Jyongsik Jang, Hyunkyou Ha(2002) “Fabrication of Hollow Polystyrene Nanospheres in Microemulsion Polymerization Using Triblock Copolymers”, Langmuir, 18, 5613-5618
[39] Stella M. Marinakos, James P. Novak, Louis C. Brousseau III, A. Blaine House,Efe M. Edeki, James C. Feldhaus, and Daniel L. Feldheim (1999) “Gold Particles as Templates for the Synthesis of Hollow PolymerCapsules. Control of Capsule Dimensions and Guest Encapsulation ”, J. Am. Chem. Soc., 121, 8518-8522
[40] Frank Caruso, Rachel A. Caruso, Helmuth Möhwald(1998) “Nanoengineering of Inorganic and Hybrid Hollow Spheres by Colloidal Templating ”, www.sciencemag.org SCIENCE VOL 282 6 NOVEMBER,P.111
[41] Franca Tiarks, Katharina Landfester, Markus Antonietti(2001) “Preparation of Polymeric Nanocapsules by Miniemulsion
Polymerization ”, Langmuir, 17, 908-918
[42] Stefanie Eiden1 and Georg Maret (2002) “Preparation and Characterization of Hollow Spheres of Rutile ”, Journal of Colloid and Interface Science 250, 281–284
[43] Jyongsik Jang, Hyunkyou Ha (2003) “Fabrication of Carbon Nanocapsules Using PMMA/PDVB Core/Shell Nanoparticles ”, CHEMISTRY OF MATERIALS VOLUME 15, NUMBER 11
[44] Xiangling Xu, Sanford A. Asher(2004) “Synthesis and Utilization of Monodisperse Hollow Polymeric Particles in Photonic Crystals ”, J. AM. CHEM. SOC. 9 VOL. 126, NO. 25, 2004 7945
[45] Yongbin Zhao, Tiantian Chen, Jianhua Zou, Wenfang Shi(2005) “Fabrication and characterization of monodisperse zinc sulfide hollow spheres by gamma-ray irradiation using PSMA spheresas templates”, Journal of Crystal Growth 275 521–527
[46] Yang Yang, Ying Chu, Fuyong Yang, Yanping Zhang(2005) “Uniform hollow conductive polymer microspheres synthesizedwith the sulfonated polystyrene template”, Materials Chemistry and Physics 92 164–171
[47] 何經、呂佳燕、黃勝明,高分子材料,復文書局(1990)
[48] R. M. Fitch, M. B. Prenosil and K. J. Sprick, J. Polym. Sci., 27, 95 (1969).
[49] T. R. Aslamazova, L. V. Boreiko and V. I. Eliseeva, Soobshcheniya, B27, 434(1987).
[50] R. M. Fitch, Br. Polym. J., 5, 467(1973).
[51] W.S. Zimmt, J.Appl. Polym Sci,27,95(1969)
[52] R. L. Zollars, J. Appl. Polym. Sci., 24, 1353(1979).
[53] 黃新義,逢甲大學碩士論文,(1995).
[54] 趙承琛,界面活性劑化學,復文書局(1986)
[55] C. P. Roe, Ind. Eng. Chem., 60, 20(1968).
[56] 刈米孝夫,界面活性劑的原理與應用,高立圖書有限公司(1996)
[57] 荊忠勝,表面活性劑概論,中國輕工業出版社(1999)
[58] R. M. Fitch and C. H. Tsai, Polym. Colloids, R. M. Fitch(ed.), 73(1984).
[59] R. M. Fitch and R. C. Watson, J. Colloids Interface Sci., 68, 14(1979).
[60] 林清安、林德培、丁幸一,界面活性劑化學,逢甲書局(1982)
[61] 趙振國,界面化學基礎,化學工業出版社(1996)
[62] 徐溢、曹京、郝明,高分子合成助用劑,化學工業出版社(2002)
[63] 鶴田禎二、川上雄資,高分子設計,日刊工業新聞社(2003)
[64] 崔正綱、殷福珊,微乳液化技術及應用,中國輕工業出版社(1999)
[65] 石全珍,奈米微粒的微乳液製備方法,信陽師範學院學報,13,p. 4(2000)
[66] 孫昌梅,微乳液聚合研究發展,中國粉體技術,6,p. 4(2000)
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊