跳到主要內容

臺灣博碩士論文加值系統

(18.97.14.87) 您好!臺灣時間:2025/02/09 10:14
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:陳右昌
研究生(外文):You-Chang Chen
論文名稱:對外直接投資對我國製造業生產力之影響
論文名稱(外文):The Impacts of Outward FDI on the Productivity of Taiwan''s Manufacturing Sector
指導教授:孫凌孫凌引用關係
指導教授(外文):Ling Sun
學位類別:碩士
校院名稱:靜宜大學
系所名稱:會計學系研究所
學門:商業及管理學門
學類:會計學類
論文種類:學術論文
論文出版年:2005
畢業學年度:93
語文別:中文
論文頁數:106
中文關鍵詞:資料包絡分析法Malmquist生產力指數對外直接投資擴張型對外直接投資防禦型對外直接投資對大陸直接投資
外文關鍵詞:Expansionary FDIMalmquist IndexData Envelopment AnalysisOutward FDIDefensive FDIFDI in Mainland China
相關次數:
  • 被引用被引用:7
  • 點閱點閱:488
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:3
近年來,我國對外直接投資盛行,尤其以台商赴大陸投資占最大宗。由於國內工業佔國民生產毛額比重近年來有逐年下降的情形,令人不禁有產業空洞化之隱憂。因此,本研究主要目的在探討近年來台商「對外直接投資」以及台商「對大陸直接投資」對我國產業生產力可能之影響。
本文研究對象為我國製造業按產業別區分之十五個中分類產業,以1992年至2003年為研究期間,採取兩階段進行分析。第一階段首先利用資料包絡法計算出各產業之Malmquist生產力指數、技術變動指數與相關之效率變動指數。第二階段則利用混合時間序列與橫斷面之資料(Panel Data)以固定效果模型來進行迴歸分析,以探討「對外直接投資」對我國產業生產力之影響。主要研究結果可歸納如下幾點:
一、在第一階段生產力之衡量方面,自1992年至2001年間我國製造業全體產業平均生產力變動、平均技術效率變動及平均規模效率變動等指標都呈現衰退及未改善的現象,只有全體平均技術變動呈現進步的現象。
二、在第二階段迴歸分析中,「對外直接投資」對我國產業實質產出成長率、生產力變動、技術變動等指標呈現顯著負面影響,反映出我國廠商「對外直接投資」對我國經濟成長、產業生產力變動、技術變動等未有提升的作用,反而造成成長趨緩的情況。
三、若將「對外直接投資」區分為「擴張型對外直接投資」及「防禦型對外直接投資」時,將可以發現「防禦型對外直接投資」不僅無法提升我國生產力,反而會阻礙生產力的成長。「擴張型對外直接投資」則對純粹技術效率變動有顯著負面的影響。
四、若將對外直接投資區分「對大陸直接投資」和「對其他國家直接投資」時,將可以發現「對大陸直接投資」對我國生產力未有提升的功能,反而導致生產力成長趨緩的現象。「對其他國家直接投資」則對技術變動產生顯著正面的影響。
The purpose of this study is to discuss the impact of outward foreign direct investment (outward FDI) on the productivity of Taiwan’s Manufacturing Sector. Our sample includes 15 industries over the time period 1991-2003.
To measure the Taiwanese industrial productivity change we first construct the Malmquist index underlying a DEA approach. The Malmquist index can be decomposed into technical change and efficiency change indices. Under the assumption of variable returns to scale the efficiency change index can be further decomposed into pure efficiency change and scale efficiency indices. Our econometric estimation is based on a pooled time series/cross-section data set with fixed effect model. The results can be concluded as follows:
1. According to the Malmquist indices, all of the average productivity, average technical efficiency as well as the average scale efficiency of 15 industries are deteriorated within the period of 1992 to 2001. However, the average technical change index presents a technological progress for the 15 industries within the sample period.
2. Outward FDI has significant negative influence on industrial GDP growth, TFP change and technical change for.
3. If we separate outward FDI into the expansionary FDI and defensive FDI, the results indicate that the defense FDI will hinder the productivity growth and the expansionary FDI will deteriorate the pure technical efficiency change.
4. If outward FDI is distinguished into FDI in Mainland China and FDI in other countries, the results indicate that FDI in Mainland China will hold back the industrial productivity change. On the other hand, FDI in other countries will make positive contribution to the industrial technical change.
第一章 緒 論 1
第一節 研究背景與動機 1
第二節 研究目的 2
第三節 研究架構及流程 4
第二章 相關文獻回顧與探討 6
第一節 生產力之定義與衡量 6
第二節 對外直接投資理論 10
第三節 對外直接投資對國內經濟影響之相關實證研究 13
第三章 研究方法與資料來源 21
第一節 生產力之衡量方法 21
第二節 實證模型之建立 25
第三節 計量方法 32
第四節 資料來源 40
第四章 臺灣製造業結構與生產力之變化 43
第一節 台灣產業結構之變化 43
第二節 我國製造業中分類別產業生產力之變動分析 49
第五章 實證分析與結果 61
第一節 單根檢定結果分析 61
第二節 實證分析結果 63
第六章 結論與建議 79
第一節 結 論 79
第二節 研究限制與建議 81
參 考 文 獻 83
一、中文部分
于宗先(1995),「臺灣工業空洞化之驗證」,自由中國之工業,84(6),頁1-11。
王健全(1998),「對外投資引發產業空洞化?」,臺北銀行月刊,28(8),頁75-85。
行政院主計處(2004),中華民國‧臺灣地區多因素生產力趨勢分析報告,台北,行政院主計處。
余玉春與陳寧馨(2001),「我國對外貿易及引進外資政策對生產力成長之影響」,企銀季刊,24卷(6),頁127-154。
宋承穎(2003),「外人直接投資對台灣經濟的影響評估---雙向FDI之探討」,國立中山大學經濟學研究所碩士論文。
李厚美(1995),「臺灣製造業結構之變遷」,自由中國之工業,84(3),頁29-44。
杜震華(1989),「直接外來投資與台灣的就業與工資」,經濟論文叢刊,17卷(3),頁405-434。
周文賢與古金英(1999),「直接投資對RCA動態效果之研究 ─ 台灣之實證」,亞太管理評論,4卷(3),頁271-288。
周玉姍(2001),「對外直接對產業空洞化之影響 ─ 以台灣製造業為例」,國立台灣大學經濟學研究所碩士論文。
周添城與吳惠林(1990),「臺灣產業結構轉變與產業空洞化」,自由中國之工業,74(4),頁11-25。
林安樂與苗坤齡(2001),「臺灣總要素生產力分析」,臺灣銀行季刊,52(1),頁146-186。
林佩文(2003),「匯率波動對出口量與市場取價行為之影響 ─ 臺灣電子產業之實證研究」,私立靜宜大學會計學研究所碩士論文。
林欣怡(1996),「直接外人投資對台灣製造業生產力影響 ─ 實證分析」,國立東華大學國際經濟系碩士論文。
林武郎(2003),「臺灣 “產業空洞化” 問題之再探討」,臺灣經濟論衡,1(4),頁19-41。
林盈助(2003),「對外投資、產業空洞化與生產力變動 ─ 台灣製造業之實證研究」,國立台北大學財政學系研究所碩士論文。
林秋琴(2004),「歐洲國家效率及生產力分析 ─ 資料包絡分析法之應用」,國立政治大學會計學系碩士論文。
林倩瑜(2003),「總體電子商務環境對製造業總要素生產力之影響─OECD國家與台灣的實證分析」,私立銘傳大學經濟學系研究所碩士論文。
林照雄(2001),「台灣企業對外直接投資與產業空洞化之探討」,銘傳學刊,11,頁81-106。
林照雄與吳文慶(2004),「台商投資大陸與兩岸貿易互動對台灣產業結構影響之探討」,企銀季刊,27(3),頁147-179。
姚盈華(2003),「電子業廠商生產力之比較分析 ─ 兼論海外投資與研發投入之效果」,私立東吳大學經濟學系碩士論文。
洪綺綺(2003),「廠商西進聲中根留台灣產業之探討」,私立東吳大學經濟學系碩士論文。
唐嘉曼(2000),「外人直接投資與技術外益-以台灣製造業為例證」,國立成功大學國際企業研究所碩士論文。
孫凌(2002),「經濟成長、技術進步與生產力的衡量」,靜宜會計,第八期。
孫凌(2003),「資料包絡分析法在生產力與生產效率衡量上之應用—Malmquist Index 之介紹」,靜宜會計,第九期。
高強、黃旭男及Toshiyuki Sueyoshi(2003),「管理績效評估資料包絡分析法」,台北,華泰文化事業公司。
梅家瑗(2001),「產業生產力變動與我國經濟成長」,主計月報,547,頁65-75。
莊奕琦與許碧峰(1999),「研究發展對生產力的貢獻及產業間的外溢效果:台灣製造業實證」,經濟論文,27(3),頁407-432。
郭國興(2003),「台商對大陸投資與產業國際競爭力之研究─兼論產業空洞化」,今日合庫,29(12),頁50-64。
陳政平(1994),「台商赴大陸投資對台灣產業之影響:以電子業、機械業、紡織業、成衣業為例」,國立政治大學國際貿易研究所碩士論文。
陳添枝與蘇顯揚(1988),「對外投資修關的產業政策」,中華經濟研究院,工業局五年期研究計劃報告書。
陳榮宇(2002),「台商對大陸投資與產業空洞化 ─ 製造業實證分析」,私立銘傳大學經濟學系碩士論文。
陳慧瀅(1997),「台灣產業結構變遷之探討」,經濟情勢暨評論,2(4),頁150-161。
黃虹順(2004),「台灣製造業對外直接投資與產業空洞化之探討」,國立中正大學國際經濟研究所碩士論文。
黃慈嫺(2003),「製造業委外代工與對外直接投資對生產力與工資之影響 ─ 台灣的實證分析」,私立中原大學國際貿易學研究所碩士論文。
楊玉奇(2004),「經濟成長、投資與失業率關聯性之研究」,私立大葉大學國際企業管理學系碩士論文。
鄒孟文與劉錦添(1997),「外人直接投資對台灣製造業波及效果之實證」,經濟論文叢刊,25(2),頁155-181。
廖振盛(2003),「臺灣產業空洞化之分析 ─ Rowthorn & Wells指標利用」,今日合庫,8,頁77-91。
劉天賜與苗坤齡(1995),「臺灣地區產業多因素生產力衡量之探討」,臺灣經濟,217,頁15-38。
鄭素珍(2003),「台灣產業結構轉變與勞動生產力變動之探討」,經濟研究,3,頁65-83。
謝寬裕(1999),「臺灣產業外移與產業空洞化之檢驗」,臺灣經濟金融月刊,35(8),頁40-65。
謝寛裕(1999),「產品生命週期貿易理論在臺灣產業發展之應用」,臺灣土地金融季刊,36(3),頁93-115。
邊裕淵(1998),「兩岸產業結構與競爭力分析」,中共研究,32(5),頁39-56。
蘇儀品(2004),「對大陸直接投資與台灣工資差異」,私立淡江大學產業經濟研究所碩士論文。
顧瑩華(2002),「對外投資對台灣就業的影響」,經濟前瞻,82,頁63-66。

二、英文部分
Aitken, B. J. and A. E. Harrison (1999), “Do Domestic Firms Benefit from Direct Foreign Investment? Evidence from Venezuela”, The American Economic Review, 89, 3, 605-618.
Akinlo, A. E. (2004), “Foreign direct investment and growth in Nigeria An empirical investigation,” Journal of Policy Modeling, 26, 627-639.
Aw, R. and A. R. Hwang (1995), “Productivity and the Export Market:A Firm level Analysis,” Journal of Development Economics, 47, 313-332.
Baldwin, R. E., and Gianmarco I. P. Ottaviano (2001), “Multiproduct Multinationals and Reciprocal FDI Dumping,” Journal of International Economics, 54, 2, 429-448.
Banker, R. D., A. Charnes, and W.W. Cooper(1984), “Some Models for Estimating Technical and Scale Inefficiencies in Data Envelopment Analysis,” Management Science, 30, 1078-1092.
Belderbos, R. and L. Sleuwaegen (1998), “Tariff jumping DFI and export substitution: Japanese electronics firms in Europe,” International Journal of Industrial Organization, 16, 5, 601-639.
Buckley, R. J. and M. Casson (1976), “The Futrue of Multinational Enterprise,” Macmillan, London.
Caves, D. W., L. R. Christensen, and W. E. Diewert (1982), ‘The economic theory of index numbers and the measurement of input, output and productivity’, Econometrica, 50, pp.1393-1413.
Caves, R. E. (1974), “Multinational Firms, Competition, and Productivity in Host-Country Markets,” Economica, 35, 4, 117-137.
Caves, R. E. (1982), “Multinational Enterprise and Economic Analysis,” Applied Economics Letter, 7, 645-647.
Charnes,A., W.W. Cooper, and E. Rhodes (1978),“Measuring the efficiency of decision making units,” European Journal of Operational Research, 2, 429-444.
Chen Tain-Jy and Y. H. Ku (2000), “The effect of foreign direct investment on firm growth: the case of Taiwan’s manufacturers,” Japan and the World Economy, 12, 153-172
Coelli, T. (1996), A Guide to DEAP Version 2.1: AData Envelopment Analysis (Computer) Program, Center for Efficiency and Productivity Analysis Department of Econometrics of New England University.
Dunning, J. H. (1980), “Toward an Eclectic Theory of Internationaal Production: Some Empirical Tests,” Journal of International Business Studiew, 11(1), 9-31.
Enders, W. (2004), Applied Econometric Time Series, New York, John Wiley & Sons, Inc.
Fabricant, S. (1969), A Primer on Productivity, New York: Random House.
Fare, R., S. Grosskopf, B. Lindgren and P. Roos (1992), “Productivity Chanages in Swedish Pharmanies 1980-1989: A Non-Parametric Malmquist Approach”, Journal of Productivity Anaysis, 3, 85-101.
Fare, R., S. Grosskopf, B. Lindgren, and P. Roos (1989), “Productivity Developments in Swedish Hospitals: A Malmquist output Indes Approach”, in: Charnes, A., Cooper, W., Lewin, A., and Seiford, L. (eds.) Data Envelmpment Analysis: Theory, Methodology and Applications, Dordrecht: Kluwer Academic Publishers, 1994.
Fare, R., S. Grosskopf, M. Norris and Z. Zhang (1994), “ Productivity Growth, Technical Progress, and Efficiency Change in Industrialized Countries,” The American Economics Review, 84, 66-83.
Farell, M. J. (1957), “The measurement of productive efficiency,” Journal of Royal Statistical Society, 120, 253-281.
Fry, M. J. (1992), “Foreign Direct Investment in Macroeconomic Framework: Finance, Efficiency, Incentive and distortions,” IFGWP, 13, 1-13.
Ghuang, Y. C. and C. M. Lin (1999), “Foreign direct Investment, R&D and Spillover Efficiency: Evidence from Taiwan’s Manufacturing Firms,” The Journal of Development Studies, 35, 4, 117-137.
Globerman, S. (1979), “Foreign Investment and ‘Spillover’ Efficiency Benefits in Canadian Manufacturing Industries,” Canadian Journal of Economics, 12, 42-56.
Gopinath, M. and W. Chen (2003), “Foreign direct investment and wages: a cross-country analysis,” The Journal of International Trade & Economic Development, 12 NO.3, pp.285-309.
Grossman, G. M. and E. Helpman (1989), “Product development and international trade,” Journal of Political Economy, 97, 6, 1054-1261.
Haddad M. and A. Harrison (1993), “Are There Positive Spillovers from Foreign Direct Investment? Evidence from Panel Data for Morocco”, Journal of Development Economics, 42, 51-74.
Helpman, E. (1984), “A simple theory of international trade with multinational corporations,” Journal of Political Economy, 92, 3, 451-471.
Horst, T. (1972), “Firms and Industry Determinants of the Decision to Invest Abroad: An Empirical Study,” Review of Economics and Statistics, 54, 258-266.
Hymer, S. H. (1960), “The International Operations of national Firms: A Study of Direct Foreign Investment, Ph.D. Thesis, MIT, MIT Press, Cambridge, MA, 1976.
Kim, June-Dong and In-Soo Kang (1996), “Outward FDI and Exports: The Case of South Korea and Japan,” Journal of Asian Economics, 8, 1, 39-50.
Kojima, K. (1973), “A Macoreconomic Approach to Foreign Direct Investment,” Hitorsubashi Journal of Economics, 14, 1-21.
Kyrkilis, D. and P. Pantelis (2003), “Macroeconomic determinants of outward foreign direct investment,” International Journal of Social Economics, 30, 827-836.
Lim, Sung-Hoon and Hwy-Chang Moon (2001), “Effects of outward Foreign Direct Investment on Home Country Exports: The Case of Korean Firms,” Multinational Business Review, 9, 1, 42-49.
Lin, An-Loh (1995), “Trade effects of foreign direct investment: Evidence for Taiwan with four ASEAN countries,” Weltwirtschaftliches Archiv, 131, 4, 737-747.
Lipsey, R. E. and W. Y. Weiss (1981), “Foreign production and exports in manufacturing industries,” The Review of Economics and Statistics, 63, 4, 488-494.
Liu, X. and C. Wang (2003), “Does foreign direct investment facilitate technological progress? Evidence from Chinese industries,” Research Policy, 32, 945-953.
Liu, X., C. Wang and Y. Wei (2001), “Causal links between foreign direct investment and trade in China,” China Economic Review, 12, 190-202.
Malmquist, S. (1953), “Index Numbers and Indifference Surfaces”, Trabajors de Estatistica, 4, 209-242.
Mariotti, S., M. Mutinelli and L. Piscitello (2003), “Home country employment and foreign direct investment: evidence from the Italian case,” Cambridge Journal of Economics, 27, 419-431.
Marwah, k. and A. TAvakoli (2004), “The effect of foreign capital and imports on economic growth: further evidence from four Asian countries(1970-1998),” Journal of Asian Economics, 15, 399-413.
Mcvicar, D. (2002), “Spillovers and foreign direct investment in UK manufacturing,” Applied Economics Letters, 9, 297-300.
Mundell, R.A. (1975), “International trade and factor mobility,” American Economic Reviews, 1, 1, 56-65.
Nelson, C. and S. Plosser (1982), “Tredns and Random Walks in Macroeconomic Time Serises: Some Evidence and Implications,” Journal of Monetary Economics, 10, 130-162.
Ng, L. F. and C. Tuan (1997) “Evolving Outward Investment, Industrial Concentration, And Technology Change: Implications for post-1997 Hong Kong,” Journal of Asian Economics, 8, 2, 315-332.
Pfaffermayr, M. (1996), “Foreign outward direct investment and exports in Austrian manufacturing: substitutes or complements?,” Weltwirtschafiliches Archiv, 132, 3, 501-552.
Raut, L. K. (1995), “R&D spillover and productivity growth: Evidence from Indian private firms,” Journal of Development Economics, 48, 1-23.
Singh, A. (1977), “U.K. Industry and the World Economy: A Case of De-industrialization?,” Cambridge Journal of Economics, 1(2), 113-116.
Sun, L. (2002), “Industrial Produstrial Productivity Growth and Openness in Twiwan,” Asian Conference on Efficiency and Productivity Growth.
Sun, L. (2002), “The Role of Openness in Economic Growth ─ A Literature Review,” Annual Report of Management, 2, 43-52.
Svensson, R. (1996), “Effects of overseas production on home country export: Evidence Based on Swedish multinationals,” Weltwirtschaftliches Archiv, 132, 2, 304-329.
Thirlwall, A. P. (1982), “De-industrialization in the U.K.,” Lloyds Bank Review, 134, 22-37.
Vernon, R. (1966), “International Investment and International Trade in the Product Cycle,” Quarterly Journal of Economics, 80(4), 190-207.
Zhang, K. H. (2001), “Does Foreign Direct Investment Promote Economic Growth? Evidence from East Asia and Latin America,” Contemporary Economic Policy, 19(2), 175-185.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top