跳到主要內容

臺灣博碩士論文加值系統

(44.222.104.206) 您好!臺灣時間:2024/05/25 23:06
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:謝瑛之
研究生(外文):Ying-Chih Hsieh
論文名稱:智慧型控制器與家電間的精簡控制功能集之研究
論文名稱(外文):A Study of Reduced Control Function Set Between Intelligent Controller and Home Appliance
指導教授:張嘉銘張嘉銘引用關係
指導教授(外文):Chia-ming Chang
學位類別:碩士
校院名稱:大同大學
系所名稱:資訊工程學系(所)
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2005
畢業學年度:93
語文別:英文
論文頁數:35
中文關鍵詞:控制功能家電
外文關鍵詞:Control FunctionHome Appliance
相關次數:
  • 被引用被引用:0
  • 點閱點閱:243
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本論文提出一組簡化後的家電控制功能碼、控制程序編程及其控制的機制,利用所提出的基本控制功能碼來編寫控制程序,再對家電執行實際的控制。
雖然一種由外部控制器來控制家電的概念已存在,但是目前家電所提供的控制功能大多已固定;當要對家電執行這些控制時,家電內部的韌體程式必須解析這些控制指令,而這些執行控制的程式因已燒錄在ROM 中,故無法再修改或更新。利用本論文所提出的機制,家電的韌體程式只要具備解析基本控制功能碼的能力即可,當由控制器送來一組由基本控制功能碼所組成的控制程序時,家電藉由執行這些基本控制功能,就可以達到完整的控制功能。
此外,利用改寫外部控制器的控制程序,就可以創造出家電的新功能,而達成“升級家電,不需更換家電"的目標。
In this thesis, a reduced set of control function code, programming of control message, and the mechanism of control are proposed. The control message is programmed using the proposed basic control function codes, then sent to appliances to perform control.
Though the concept of control home appliance via an external controller is
existence. When the appliances executing the control command, the firmware in
appliance will interpret the command and execute it. Because the program is usually located in ROM, it is difficult to change or upgrade without the assistance of manufacturer. Applying the proposed mechanism, the needed capability of the firmware is to interpret the basic control function code and execute it. The control message is composed of a series of basic control function code. When receiving the control message, the appliance performs the complete control function via the execution of each basic control function.
Besides, the control producer stored in external controller can be rewritten to create new functions not built by manufacturer. The proposed mechanism could achieve the goal, “Upgrade appliance without buy a new one.”
CHAPTER 1 INTRODUCTION
1.1 Motivation & Objective
1.2 Subject and Architecture
CHAPTER 2 BACKGROUND
2.1 The Device Description of SCP
2.2 MODBUS Protocol
2.2.1 Transactions on MODBUS Networks
2.2.2 General MODBUS Message Frame
2.2.3 The Data Unit ( PDU ) of MODBUS Message
2.2.4 Function Code Categories
CHAPTER 3 ANALYSIS OF MIMIMUM FUNCTION
3.1 Instruction
3.2 Find out Basic Function Set
3.2.1 Hardware Structure of Microwave oven
3.2.2 Basic Executive Procedure of Microwave Oven
3.2.3 Device-Specific Functions of Microwave Oven
3.2.4 Common Functions
3.3 Description of Control Function
3.4 Design a communication protocol
3.4.1 Communication Architecture
3.4.2 Control Message Format
3.4.3 Error Check
CHAPTER 4 SYSTEM IMPLEMENT
4.1 System Architecture
4.2 Design of Controller
4.2.1 Hardware Structure
4.2.2 Control Panel File
4.2.3 Software Structure
4.3 Message Procedure of Home Appliance
CHAPTER 5 CONCLUSION
REFERENCES
[1] UPnP Device Architecture Reference Specification Version 1.0, Microsoft Corporation, 2000.
[2] http://www.microsoft.com/japan/windows/scp/
[3] Modbus Protocol Reference Guide, MODICON Inc, 1996.
[4] Modbus Application Protocol Specification V1.1, Modbus-IDA, 2004
[5] Rodger Richey and Steve Humberd, “Embedding PICmicro Microcontrollers in the Internet,” Microchip Technology Inc.2000.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關論文