跳到主要內容

臺灣博碩士論文加值系統

(18.97.14.82) 您好!臺灣時間:2025/02/07 02:50
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:高帆辰
研究生(外文):FanChen Kao
論文名稱:應用網格運算於熱液動潤滑之最佳化分析
論文名稱(外文):The Application of the Grid Computing in the Optimization of the Thermohydrodynamic Lubrication
指導教授:王能治王能治引用關係
指導教授(外文):Nenzi Wang
學位類別:碩士
校院名稱:長庚大學
系所名稱:機械工程研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2006
畢業學年度:94
語文別:中文
論文頁數:46
中文關鍵詞:網格運算最佳化設計熱液動潤滑
外文關鍵詞:grid computingoptimizationthermohydrodynamic
相關次數:
  • 被引用被引用:0
  • 點閱點閱:228
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
在工程領域的最佳化設計中,需要重複執行數值模型來得到最佳化的參數,雖然使用高效能的電腦或多台電腦分工合作的方式有助於降低計算時間,但對於計算工作數量龐大的問題仍無法有效地減少計算時間。而網格運算能整合網路上的計算資源,同時間處理較多的計算工作,因此,本研究提出一個網格計算應用於磨潤領域的初步測試評估。
本研究採用17台電腦建立網格運算平台來模擬遠距離之計算資源,電腦的作業系統為Linux,訊息溝通軟體及中介軟體為OpenMosix,其中1台電腦為主控電腦。本研究採用2個設計參數之滑塊軸承模型,其軸承性能可由熱液動潤滑數值模型求得,以此模型計算軸承的最大負載最佳化設計問題做為網格運算平台之測試。本研究藉由窮舉法和網格運算平台之計算,求得最好的設計參數。為充分使用計算資源,本研究提出針對處理器及網路連結效能為依據之工作分配機制,且能確保計算工作可在作業系統異常之因素下能順利完成,並評估網格運算之效能。
由研究結果得知,本研究所提出之機制可確保每個計算工作能完成,並可有效率地使用網格運算平台內的資源。本研究所提供之網格運算平台能夠處理大量計算工作且計算工作彼此不相依的問題,並降低計算時間,有助於如基因演算法之每次搜尋過程計算數量龐大的相關研究。
For engineering optimization problems, repetitive calculations for optimal solutions are usually required. In order to solve these problems, a high performance computer or a parallel computing system is usually used to reduce the execution time. In addition, the technique of grid computing can deal with even larger jobs by integrating the computing resources in the internet. Therefore, this study presents a pilot study on applying grid computing techniques to the optimum design in the field of Tribology.
In this study, a simulated grid computing platform of 17 PCs was constructed to perform the optimization of exhaust search type. The operating system is Linux and the middleware for message passing is OpenMosix. Except for the two PCs having higher processing speeds, the other PCs have identical configuration. A master computer is used to assign the tasks to the other computing (slave) nodes for a fluid-film lubricated slider optimization. In order to fully utilize the computing resources, a job assigning mechanism based on the processor speed and the network connection bandwidth was proposed. We also present a method that can complete the computing in the case of unstable networking. The efficiency of the simulated grid computation was examined with examples of independent distributed tasks. This study can be helpful for the applications which require a significant amount of independent computations such as in a search step of a genetic algorithm.
第一章 簡介 1
1.1 前言 1
1.2 研究背景與動機 1
1.3 文獻回顧 3
第二章 網格運算 6
2.1 網格簡介 6
2.2 網格結構 8
2.3 網格運算簡介 10
第三章 研究架構 13
3.1 OpenMosix 14
3.2 因應運算電腦當機或網路連結中斷之機制 20
3.3 工作分配機制 21
3.4 網格運算效能評估 23
第四章 數值模型與最佳化設計方法 25
4.1 數值模型 25
4.2 最佳化設計 27
第五章 結果與討論 29
5.1 網格運算平台測試 29
5.2 分配工作機制之測試 40
第六章 結論與建議 45
參考文獻 46
1.Foster, I., and Kesselman, C., The Grid: Blueprint for a New Computing Infrastructure, 1st edition, Morgan Kaufmann, 1998.
2.Shan, H., and Oliker, L., “Job Superscheduler Architecture and Performance in Computational Grid Environments”, Conference on High Performance Networking and Computing, 2003.
3.Tierney, B., Johnston, W., Lee, J., and Thompson, M., “A Data Distributed Computing Architecture for ‘Grid’ Applications”, Future Generation Computer System, Vol. 16, pp. 473-481, 2000.
4.Wang, N., and Seireg, A.A., “Thermohydrodynamic Lubrication Analysis Incorporating Thermal Expansion across the Film”, Jour. of Tribol., Vol. 116, pp. 681-689, 1994.
5.許淳智,「應用於發展高計算量系統之泛型網格化系統」,國立中正大學,碩士論文,民國92年。
6.郭育倫,「應用叢集計算與網格計算於生物資訊之研究」,東海大學,碩士論文,民國93年。
7.賴傅霖,「網格計算環境之實作與效能分析」, 東海大學,碩士論文,民國92年。
8.蔡智明,王能治,「應用平行空間分割(DIRECT)演算法於熱液動潤滑最佳化設計之研究」,第二屆磨潤暨材料科技研討會研討會,No. 94015,民國94年九月。
9.http://twgrid.org/ch/
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
1. 林清章(民86)。我國家庭教育實施現況及展望。臺灣教育,559,49-56。
2. 林純真(民87)。從家庭教育的應然與實驗,論家庭教育法的立法方向。社教雙月刊,87,42-46。
3. 林如萍(民92)。我國家庭教育發展之展望-知識體系之建構。家政教育學報,5,121-154。
4. 吳毓瑩(民85)。量表奇偶點數的效度議題。調查研究,2,5-34。
5. 羅虞村(民89)。我國家庭教育的發展現況與展望。載於中華民國家庭教育學會(主編),家庭教育學(251-268頁)。臺北市:師大書苑。
6. 羅虞村(民88)。邁向二十一世紀的家庭教育展望。社會教育年刊,47,24-31。
7. 鍾思嘉(民87)。親職教育的規劃與實施。學生輔導,59,16-25。
8. 鄭麗珍 陳麗文(民88)。推動社區家庭教育的工作模式。社教雙月刊,90,7-11。
9. 廖永靜(民94)。國民小學的家庭教育。教師之友,46(2),21-32。
10. 楊國賜(民89)。新世紀家庭教育的展望。成人教育,55,2-6。
11. 楊淑娟(民94)。芬蘭用家庭教育贏過世界。天下雜誌2005年教育特刊,335,56-58。
12. 黃意舒(民81)。我國社會變遷中家庭教育的探討。臺北市立師範學院學報,23,381-396。臺北市:臺北市立師範學院。
13. 黃采華(民81)。社區家庭教育的調查與推展--以臺北市西湖國民小學為例。社教雙月刊,51,14-21。
14. 黃月純(民92)。英國推動家庭教育之作法與啟示。臺灣教育,619,62-66。
15. 曾憲政、戴淑芬(民92)。二十一世紀家庭教育的新課題及其推動策略。國家政策季刊,2(3),103-124。