1.包一匡,限制理論應用在產品組合決策研究—以IC封測廠為例,逢甲大學工業工程與系統管理研究所碩士論文(2006)2.劉錫明,多重物料限制下產出導向的產品組合問題,華梵大學工業工程與經營資訊研究所碩士論文(2005)3.黃國維,「以限制資源群為基礎的產品組合決策模式之研究」,中華大學科技管理研究所(2005)4.周信成,「台灣筆記型電腦產業垂直整合策略之研究」,國立政治大學企業管理研究所(2004)。5.柳昌良,「筆記型電腦廠系統組裝線流程分析」,工業工程學刊,Vol. 21, No.2, pp.203~212 (2004)。
6.虞正邦,「電腦組裝業供應鏈採購庫存管理模式之個案研究」,輔仁大學資訊管理學系(2004)。7.王照晴,「印刷電路板產品組合最適化決策之研究」元智大學資訊管理研究所(2004)8.洪福琳,「微利時代接單可行性決策模式」,中華大學科技管理研究所(2003)。9.嚴永海,「限制理論在產品組合的應用—以導線架廠為例」,國立交通大學管理學院碩士在職專班工業工程與管理組(2003)。10.蘇煒,「最大產品利益的研究方法:以台灣某TFT廠陣列製程為例」,元智大學資訊管理研究所碩士論文, (2003)。11.趙雯如,「製造商快速回應供貨補貨模式之探討」義守大學工業工程與管理學系碩士論文(2003)12.曾明發與吳鴻輝,「簡易型限制驅導式現場排程與管理系統之研究」,管理研究學報,Volume 3, Number 1, January (2003)。
13.黃國峰,「限制理論應用在印刷電路板產品組合決策研究」,中山大學企業管理學系(2003)。14.黃記斌,「應用限制理論之接單決策支援系統」,國立台灣科技大學工業管理系(2003)。15.張勇毅,「CTO生產模式之研究~以我國筆記型電腦為例」,國立政治大學經營館理學系(2002)。16.Monte Swain and Jan Bell,曾渙釗譯,「限制理論與產出會計」,麥格羅希爾(2002)。
17.孫妙雪,「得利產出會計功能之研討」,管理會計,第六十一期,Vol. 61, pp 63~74 (2002)。18.邱于霏,「有限庫存資源下產品組合最適化-以電子組裝業為例」元智大學工業工程與管理研究所(2002)19.蔡揚進、吳伯銓與魏秋建,「改良式限制理論應用於資源限制下的專案排程」,工業工程學刊,Vol. 18,No.1, pp 87~95(2001)。
20.李榮貴、吳鴻輝,「限制趨導式現場排程與管理技術」,全華科技(2001)。
21.林美鳳,「單項產品、多個供應商存貨模式—考慮前置時間、數量折扣和資源限制」,國立彰化師範大學商業教育學系(2001)22.柳昌良,「筆記型電腦廠製造流程分析:系統組裝」,國立清華大學工業工程與工程管理學系(2001)
23.李宏健,「利用限制理論及邊際貢獻分析決定產品組合」,管理會計,第五十一期,Vol.51,pp25~40 (2000)。24.林智崇,「限制理論產出會計成本制度之探討與應用」,國立交通大學工程與管理系(1999)。25.李漢星,「以限制理論為基礎的訂單管理系統之探討」,東海大學工業工程研究所(1998)。26.Eliyahu M.Goldratt and Jeff Cox,齊若蘭譯,「目標」,天下文化(1996)。
27.吳漢雄、鄧聚龍、溫坤禮,「灰色分析入門」(1996)
28.Andersen LLP, ”Theory of Constraints (TOC) Management System Fundamentals”, Statement on Management Accounting Statement No 4HH, June 1999.
29.I-Hsuang Hong,”Product Mix Planning for long process flow production”, National Taiwan University, Master Thesis, pp,17-46,1999.
30.Charnes, A. and Cooper, W.W.”Programming with linear fractional functions,”Naval Res.Logist.Quart,1962.
31.Fox R.E. Theory of Constraints, NAA. Conference Proceedings,1997.
32.Goldratt,Eliyahu M.,"The Unbalance Plant",APICAS 24th Annual International Coference Proceeding. 1981
33.Jadicke, R. K., “Improving Breakeven Analysis by Linear Programming Techniques,” NAA Bulletin,1961.
34.Optimization modeling with LINGO, 5thed,LINDO System Inc., Chicago, II,2002.
35.Poriman Tioanda, Larry Whitman and Do Malzhan, ”Determine Product Mix using ABC and TOC”, Proceeding of The 4th Annual International Conference on Industrial Engineering Theory, Applications and Practice, November 1999, pp 1~5.
36.Plenert,G.,”Optimizing theory of constraints when multiple constrained resources exist.”European Journal of Operational Research,1993.
37.Stefano Apolloni, Marcello Lando and Matteo M. Savino,” Advanced Technigues of Theory of Constraints and Activity-Based Costing for scheduling of high technology production lines”, Sannium University, Benevent, Italy.
38.Thomas Corbett, ”Making Better Decision: Throughput Accounting calculates the impact that a decision will have on a company’s overall performance. It does this without allocating costs to products”, CMA Management, November 1999, pp 33~39.
39.Thomas Corbett, ”Throughput Accounting and Activity-Based Costing: The Driving Factors behind each Methodology”, Journal of cost management, January/February 2000, pp 37~4.5.
40.William G. Sullivan, Larry N. Killough and Eileen M. Van Aken, ”An Activity-Based Costing and Theory of Constraints Model for Product-Mix Decision”, Virginia Polytechnic Institute and State University, 1999.