跳到主要內容

臺灣博碩士論文加值系統

(54.173.214.227) 您好!臺灣時間:2022/01/25 12:56
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:蘇偉鈞
研究生(外文):Wei-chun Su
論文名稱:橢圓形光纖頭端研磨製程開發
論文名稱(外文):A New Fabricate Method Applied to Polish and Shape the Lensed Fiber into the Ellipse Tip
指導教授:曾逸敦
指導教授(外文):Yih-tun Tseng
學位類別:碩士
校院名稱:國立中山大學
系所名稱:機械與機電工程學系研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2006
畢業學年度:94
語文別:英文
論文頁數:52
中文關鍵詞:研磨光纖橢圓形
外文關鍵詞:tippolishlensed fiberellipse
相關次數:
  • 被引用被引用:1
  • 點閱點閱:215
  • 評分評分:
  • 下載下載:48
  • 收藏至我的研究室書目清單書目收藏:0
本篇論文的目的在於設計一套製造橢圓透鏡光纖的新方法,目前業界在製造透鏡光纖都是將以成型的光纖頭端至入光纖接機。在將光纖置入光纖熔接機之前有許多的步驟需要先行確定,而這些步驟會造成時間上大大的浪費和增加成品失敗的機率。因此本篇論文提供一項用研磨方式就可製造出橢圓形透鏡光纖,在此研究中,使用了CCD去監測光纖頭端形狀,之後再使用監測程式來判斷光纖頭端的曲率半徑。因此本研究將會是朝向自動化光纖研磨系統的重要技術之一。
The goal of this study is to design a new method which can be used for manufacturing the elliptic lensed fiber. The lensed fiber is obtained by heating the fiber tip in a fusing splicer at present. Before taking the fiber into fusing splicer, there are many procedures have to be checked. Those procedures will take a lot of time and increase the rate of inaccuracy. So, this research proposes a new method to form the elliptic lensed fiber by polishing. In this study, we simply use couple charge device (CCD) to detect the shape of the fiber tip. Than, we use the detected program to get the curvature of fiber tip. The system had been successfully achieved the purpose of curvature-controlled. The research will be the key technique toward the automatic bare fiber polishing system.
謝 誌 2
Contents 3
List of Figures 4
List of Tables 6
摘要 7
Abstract 8
Chapter 1. Introduction 9
1-1 Introduction of Optical Communication System 9
1-2 The Introduction of Fiber Manufacturing 11
1-3 Motivation and Purpose 13
Chapter 2. Reference Review 15
2-1 Introduction of the Manufacturing Methods of the Curved surface 15
2-2 The Roughness of the Surface 19
Chapter 3. Research Methods 21
3-1 The Theory of Removal Volume and Pressure Distributions 21
3-1-1 The Removal Volume of Fiber 21
3-1-2 The Theory of Pressure Distributions 21
3-2 The Polishing Method of Elliptic Fiber Tip 22
3-2-1 The Introduction of Polishing Method 22
3-2-2 The Applications and Computes 25
3-2-3 The Curvature Analysis and the Simulation 29
Chapter 4. Experiments and Results 35
4-1 The Structure of Polishing System 35
4-2 The Experiment Results 37
4-3 Discussions 48
Chapter 5. Conclusion and Further Direction 49
5-1 Conclusion 49
5-2 Further Direction 49
Reference 51
[1].呂昱寬, 「新型四角錐光纖透鏡」, 國立中山大學通訊工程研究所碩士論文, 2003.
[2].李順天, 「二維雷射二極體與錐形光纖間能量耦合之探討」, 國立中山大學光電工程研究所碩士論文, 1999.
[3].張世恩, 「利用錫銲技術構裝半導體雷射模組之研究」, 國立中山大學光電工程研究所碩士論文, 2002.
[4]. C. Marxer, “Vertical Mirrors Fabricated by Reactive Ion Etching for Fiber Optical Switching Applications”, Micro Electro Mechanical Systems, 1997. MEMS ''97, Proceedings, IEEE., Tenth Annual International Workshop on 26-30 Jan. 1997 Page(s):49 – 54.
[5]. H. Kumazaki, “Micromachining of Optical Fiber Using Reactive Ion Etching And Its Application”, Microprocesses and Nanotechnology Conference, 2000 International 11-13 July 2000 Page(s):154 – 155.
[6]. S. Mononobe, “A Model Based on Geometrical Construction in Designing A Pencil-Shaped Fiber Probe for Near-Field Optics”, Lightwave Technology, Journal of Volume 15, Issue 6, June 1997 Page(s):1051 – 1055.
[7].G. R. Lin, “A Novel Tipped Fiber Structure for Reducing of the Fusing-Induced Coupling Loss between Erbium-Doped and Single-Mode fiber ”, Lasers and Electro-Optics, 2001. The 4th Pacific Rim Conference on Volume 2, 15-19 July 2001 Page(s): II-242 - II-243 vol.2.
[8].林時正, 「超精密曲面輪磨技術」, 機械工業雜誌,1990年9月號, pp.182-190.
[9].Y. Nagaura, “The Machining and Characteristic of an Ultra-Thin Plano-Convex-Type Quartz Oscillator”, Frequency Control Symposium, 1998. Proceedings of the 1998. IEEE International 27-29 May 1998 Page(s):844 – 847.
[10].莊賀喬, 「非球面鏡片形狀誤差修正之研究」, 國立清華大學動力機械工程研究所碩士論文, 2002.
[11].吉田正大郎,“Optics glass technology ”, 復漢書局, 1987.
[12].M. Takahashi, “Compatibility of conventional ferrule with step-ferrule for angled convex optical connector”, Electronic Components and Technology Conference, 1995.Proceedings. 45th 21-24 May 1995 Page(s):406 – 412.
[13].M. Takahashi, “Elastic Polishing Plate Method and Conditions for Forming Angled Convex Surface on Ferrule Endface”, Lightwave Technology, Journal of Volume 15, Issue 9, Sept. 1997 Page(s):1675 – 1680.
[14].林依恩,「透鏡光纖研磨系統及方法」,專利號93106823,2004.
[15].L. Yin, “Polishing of Fibre Optic Connectors”, 2003.
[16].黃長耀,「光纖套圈端面之研磨分析與模擬」, 國立台灣大學機械工程研究 所碩士論文,1999.
[17].I. E. Lin, “A Lensed Fiber Workstation Based on the Elastic Polishing Plate Method”, Precision Engineering, Volume 29, Issue 2, April 2005, Pages 146-150, 2004.
[18].S. M. Yeh, “A New Scheme of Conical-Wedge-Shaped Fiber Endface for Coupling Between High-Power Laser Diodes and Single-Mode Fibers”, Lightwave Technology, Journal of Volume 23, Issue 4, April 2005, Page(s):1781 – 1786.
[19].S. Y. Huang, “A New Scheme of Conical-Wedge-Shaped Fiber Endface for High-Power Laser to Single Mode Fiber Coupling”, Lasers and Electro-Optics, 2005. Conference on Volume 2, 22-27 May 2005 Page(s):1473 - 1475 Vol. 2.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top