跳到主要內容

臺灣博碩士論文加值系統

(18.97.9.172) 您好!臺灣時間:2025/02/10 12:43
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:吳聲志
研究生(外文):Sheng-Chih Wu
論文名稱:FRP圓拱型蓋板之分析與設計
論文名稱(外文):The Stress Analysis and Design of FRP Circular Dome Covers
指導教授:林坤楠
指導教授(外文):Kuen-Nan Lin
學位類別:碩士
校院名稱:國立臺灣海洋大學
系所名稱:輪機工程系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2006
畢業學年度:94
語文別:中文
論文頁數:55
中文關鍵詞:圓拱型蓋板
外文關鍵詞:FRP
相關次數:
  • 被引用被引用:0
  • 點閱點閱:550
  • 評分評分:
  • 下載下載:28
  • 收藏至我的研究室書目清單書目收藏:0
摘要

將FRP具質量輕、耐腐蝕性高及強度不亞於不�袗�的優點,作為FRP圓拱形蓋板的設計來考量。本文是使用PRO-E繪圖軟體畫出蓋板的幾何形狀,將圖形座標直接轉換至ANSYS軟體的節點座標來作應力的分析。FRP材料試片之破壞彎曲應力、彎曲彈性係數在CNS規範定義下試驗,把分析結果與材料試驗資料來作比較,便可得知FRP蓋板所受之應力與變形量是否合乎規定在安全範圍內,再將不同拱高與旋長的比值資料依分析結果繪出一曲線圖,把應力、變形量、材料尺寸間的關係藉由曲線圖表達,作為日後修正設計的參考,反覆地修改,便能達到最佳化的目的,而FRP圓拱形蓋板最佳化的範圍文中將加以描述。最後將得到不同比值、蓋板厚度的設計曲線,作為設計者的參考圖表。
ABSTRACT

The less specific weight, corrosion resistant property and the high strength of FRP are the advantages while comparing with the steels. It is the reason to be used in designing the circular dome covers. The geometrical configuration is drawn by PRO-E software which can be transformed to the nodal coordinates of the ANSYS stress analysis software for the later analysis. The fracture bending stresses, flexure elastic modulus and Poison’s ratio in the random direction of the shell surface had been tested according to the codes of CNS. The result of the stress analysis of the circular come cover will be compared with the tested data and the specification of the codes in the requirement of the maximum deflection. With the various ratio of come height and chord length, the plots of the analysis result with various dimensions are drawn, which will be used in the primary design in effective selecting the suitable dimension. The plots with various ratio, thickness and the span are shown.
目 錄
第一章 緒論
第二章 FRP簡介
第三章 實驗結果
第四章 分析與結果
第五章 結論
參考文獻
參考文獻

1.蕭貴芬,“玻璃纖維專題調查報告”,工研院化工所。
2.馬振基、施文昌(1992),“複合材料簡介”,科學月刊雜誌,VOL.0274。
3.沈育霖(2005)”複合材料之應用簡介”,勞工安全衛生簡訊,VOL.70。
4.楊勤(2003)” FRP圍束混凝土方形柱之力學行為研究“,國立臺灣大學工程科學與海洋工程學系碩士論文。
5.倉西茂(昭和61年)”構造力學公式集”,253頁。
6.林坤楠、蘇達貞、陳奕安、陳彥君(2004)”FRP人孔格柵休息平台的應力分析與設計”,強化塑膠廣用新知季刊,VOL.100/101,40頁-43頁。
7.李有豐、丁湘蘭(2002)” FRP 橋面版結構分析與設計之研究“,中華民國第六屆結構工程學術研討會,Paper No. P05。
8.何益川、陳星(2003)”PRQ/E入門2001”,第三章。
9.虎門科技股份有限公司,ANSYS10.0網路索引資料庫(2005)。
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top