跳到主要內容

臺灣博碩士論文加值系統

(18.97.14.87) 您好!臺灣時間:2025/02/17 13:40
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:楊之青
研究生(外文):Chin-Ching Yang
論文名稱:行動電話外殼卡勾之CAE分析
論文名稱(外文):CAE Analysis for Snaps of Cell Phone Case
指導教授:林清安林清安引用關係
指導教授(外文):Alan C. Lin
學位類別:碩士
校院名稱:國立臺灣科技大學
系所名稱:機械工程系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2006
畢業學年度:94
語文別:中文
論文頁數:86
中文關鍵詞:卡勾有限元素
外文關鍵詞:CAEPro/MechanicaSnap
相關次數:
  • 被引用被引用:14
  • 點閱點閱:859
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:1
中文摘要
本論文利用Pro/Mechanica軟體來分析行動電話外殼之卡勾在受力時的幾何變形及應力分佈狀況,並進而做最佳化分析與設計改善。本論文分為兩個主題:(1) 研究受力位置和卡勾型式對卡勾變形量的影響以及 (2) 利用靈敏度分析與最佳化分析的功能,找出卡勾在受力時,影響應力及變形的關鍵參數,進而求出最佳的設計尺寸,達到最小應力值及減少位移量的研究。
本論文主要分析流程為:(1) 首先在Pro/ENGINEER建立簡化的幾何模型、(2) 在Pro/Mechanica中設定材質,並產生有限元素分析所需的網格、(3) 設定分析條件(包括限制條件、負載、位移量測等)、(4) 進行不同受力位置的應力及位移分析,歸納出受力位置對卡勾變形量的影響、(5) 以不同的卡勾型式進行應力及位移分析,求出卡勾型式對卡勾變形量的影響、(6) 進行區域及全域靈敏度分析,以了解設計參數對量測值及應力的影響、(7) 以最佳化分析得到最佳的設計尺寸,並與原始的設計做比較,呈現改善的效果。
本論文之研究提供給機構工程師在手機的結構設計方面有一個完整的分析與參考模式,並藉由Pro/ENGINEER與Pro/Mechanica的整合介面,縮短操作者的學習曲線,並縮短產的開發時間及減少設計的變更費用。
ABSTRACT
This thesis uses Pro/Mechanica to analyze the shape deformation and stress distribution of snaps of cell phone cases. Optimal analysis of design parameters is also undertaken to achieve the goal of design optimization. The following two major issues are addressed: (1) study the effects of locations of applying the external forces and (2) use sensitivity analysis and optimal analysis to find the key design parameters with regard to the deformation of snaps, so as to find the optimal design dimensions to reach to goal of minimal stress and deformation.
The procedure of the research is set as follows: (1) use Pro/ENGINEER to create the simplified geometric model of cell phone cases, (2) use of Pro/Mechanica to assign material and generate FEM meshes, (3) set up the boundary conditions, such as constraints, loading, measurement of displacement, etc., (4) undertake the static analysis and displacement analysis for different locations of force application, and conclude their effects on deformations of snaps, (5) use different types of snaps to undertake the static analysis and displacement analysis, and conclude the effects of snap types on deformations, (6) carry out local and global sensitivity analyses so as to find the effects of design parameters on stress and displacement of snaps, (7) carry out optimal analysis to find the optimal design parameters and compare the results with those of the original design.
The study of this research provides a complete procedure of analyzing the structure design of snaps in a cell phone. By means of integrating Pro/ENGINEER and Pro/Mechanica, an engineer is capable of analyzing his/her current design, so that the product development cycle-time can be shortened and the costs rendered from design changes can also be reduced.
目錄
中文摘要 II
ABSTRACT III
誌謝 IV
目錄 V
圖表索引 VIII
第一章 緒論 1
1.1 研究背景與動機 1
1.2 文獻回顧 3
1.3 研究流程與方法 4
1.4 論文架構 7
第二章 行動電話外殼邊界條件設定 9
2.1 行動電話外殼原始模型 9
2.2 簡化行動電話外殼組件 11
2.3 元件材質的設定 12
2.4 網格劃分 13
2.5 組件邊界條件設定 14
2.5.1 限制條件設定 14
2.5.2 負載設定 16
2.5.3 位移量測的設定 18
第三章 行動電話外殼受力位置分析 22
3.1 受力於卡勾處和兩卡勾間比較 22
3.1.1 受力於卡勾處分析 22
3.1.2 受力於兩卡勾間分析 28
3.1.3 分析結果與討論 30
3.2 受力於不同卡勾處比較分析 31
3.2.1 受力於A卡勾處分析 32
3.2.2 受力於B卡勾處分析 37
3.2.3 受力於C卡勾處分析 39
3.2.4 受力於D卡勾處分析 42
3.2.5 分析結果與討論 44
3.3 力學實驗 46
3.3.1 實驗設備與方法 46
3.3.2 實驗結果與討論 51
第四章 不同型式卡勾受力分析 55
4.1 有孔洞型卡勾受力分析 55
4.2 凹入型卡勾受力分析 56
4.3 勾狀型卡勾受力分析 57
4.4 幾何排數型卡勾受力分析 58
4.5 分析結果與討論 60
第五章 行動電話外殼靈敏度分析 62
5.1 區域靈敏度分析 62
5.1.1 參數的選擇與設定 62
5.1.2 分析執行與分析結果 64
5.2 全域靈敏度分析 69
5.2.1 參數的選擇與設定 69
5.2.2 分析執行與分析結果 71
第六章 行動電話外殼最佳化分析 76
6.1 目標與限制條件的設定 76
6.2 分析結果 78
第七章 結果討論與未來發展 81
7.1 研究的結果討論 81
7.2 未來的可能發展與方向 82
參考文獻 84
作者簡介 86
參考文獻
1. 莊舒蓁,”產品造形與工程設計對應模式之研究”,碩士論文,國立雲林科技大學,2003。
2. 馬愛軍,傳月,王旭,”Patran和Natran有限元分析”,北京市清華大學出版社,2005。
3. Logan, Daryl. L., ”A First Course in the Finite Element Method”, CA: Brooks/Cle.
4. 陳新郁,林政仁,”有限元素分析-理論與應用ANSYS”,台灣培生教育出版股份有限公司,2003。
5. Kunwoo Lee, ”Principles of CAD/CAM/CAE Systems”, Addison Wesley, Longvnan, Inc.
6. 黃耀民,”筆記型電腦鉸鏈結構之應力分析”, 碩士論文,中央大學,2001。
7. 林弘宗,”泛用型自動插件機之結構分析及改進設計”,碩士論文,淡江大學,2000。
8. 楊忠衡,”PCB鑽孔機進给系統之分析與設計”,碩士論文,彰化師範大學,2000。
9. 陳建良,”鐵路客車車廂結構體之應力與疲勞壽命分析”,碩士論文,國立中央大學,2000。
10. 許時偉,”液化石油氣槽車安全連接器之設計”,碩士論文,淡江大學,1999。
11. 林清安,”Pro/ENGINEER Wildfire 2.0零件設計�{基礎篇(上)”,知城數位科技公司,臺北,2005。
12. Parametric Technology Corporation, ”Fundamentals of Pro/ME- CHANICA Structure/Thermal 2001”, MA, USA.
13. Roger Toogood ”Pro/ENGINEER Wildfire 2.0 MECHANICA Tutorial”, SDC Publications, 2004.
14. YVES Gagnon, ”Pro/MECHANICA Wildfire PART 1 – Idealizations”, SDC Publications, 2003.
15. YVES Gagnon, M.A.Sc ”Pro/MECHANICA Wildfire PART 2 – Studies and Connections”, SDC Publications, 2003.
16. http://www.geplastics.com/resins/designsolution/tools/index.html
17. http://www.t-mec.com.tw
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊