1.曾清秀、呂桓綜、李永全,“幫細胞蓋一個家──組織工程用支架”,科學發展第362期,2002年8月。
2.Lanza, R.P., Langer, R. and Vacanti, J., “Principles of Tissue Engineering,2nd Ed.”, Academic Press, 2000.
3.Rüdiger Landers et al., “Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering”, Biomaterials 23 (2002), pp.4437-4447.
4.徐善慧、陳俊宇,“巧奪天工的人類智慧-組織工程”,科學發展356期,2002年8月。
5.李宣書,“淺談組織工程”,物理雙月刊二十四卷三期,2001年6月。6.(http://www.itri.org.tw/) 工業技術研究院網頁。
7.余柏毅,“幾丁聚醣、膠原蛋白、明膠之具表面微構形膜材製備與其在組織工程上之應用”,私立元智大學化學工程學系碩士論文,中華民國九十二年六月。8.黃穎斐,“生醫敷料及人工皮膚”,科學發展380期,2004年8月。
9.Yongnian Yan et al., “Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique”,Biomaterials 26 (2005) , pp.5864–5871.
10.吳侑峻,“利用聚乳酸-聚乙醇酸共聚物當作支架”,國立成功大學生物科技研究所碩士論文,中華民國九十二年一月。
11.Shoufeng Yang et al., “The design of scaffolds for use in tissue engineering. Part I. Traditional Factors”, Tissue Engineering, Volume 7, Number 6,2001,679-689.
12.黎坤瓚,“在細胞育成環境中使用快速成型技術製作組織工程支架之可行性研究”,國立台灣科技大學機械工程系碩士論文,中華名國九十四年。13.J. M. Yang; H. L. Chen; J. W. You; J. C. Hwang, Polymer Journal,Vol. 29, pp657~662,( 1997 ).
14.Y. H. Na; Y. He; X. Shuai; Y. Kikkawa; Y. Doi; Y.Inoue, Biomacromolecules, Vol. 3, pp1179~1186, ( 2002 ).
15.C. H. Kim; K. Y. Cho; E. J. Choi; J. K. Park, Journal of Applied Polymer Science , Vol. 77, pp226~231, ( 2000 ).
16.R. Dell’Erba; G. Groeninckx; G. Maglio; M.Malinconico; A.Migliozzi, Polymer, Vol. 42, pp7831~7840, ( 2001 ).
17.G. Maglio; A. Migliozzi; R. Palumbo; B. Immirzi; M. G. Volpe, Macromolecular Rapid Communications, Vol. 20, pp236~238,( 1999 ).
18.T.B.F. Woodfield, J. Malda, J. de Wijn, F. Peters, J. Riesle, C.A. van Blitterswjk. “Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique”. Biomaterials 25 (2004) 4149-4161.
19.Mikos, A. G. and Temenoff, J. S.,“ Formation of Highly PorousBiodegradable Scaffolds for Tissue Engineering ”, Electronic Journal of Biotechnology, Vol. 3, No.2, 2000
20.C. K. Chua, K. F. Leong, et al.,“Development of a Tissue Engineering Scaffold Structure Libraryfor Rapid Prototyping. Part 2: Parametric Library and AssemblyProgram” . Int J Adv Manuf Technol (2003) 21:302–312.
21.鄭正元,“電腦輔助設計技術參考手冊---快速原型加工”,國立台灣工業技術學院機械工程技術系,1997。
22.Zein I et al., ”fused deposition modeling of novel scaffold architecture for tissue engineering application.” Biomaterials 2002;23(4):1169-1185.
23.Jessica M. Williams et al., “Bone tissue engineering using polycaprolactone scaffold fabricated via selective laser sintering.” Biomaterials 26 (2005) 4817-4827.
24.Shoufeng Yang et al., “The design of scaffolds for use in tissue engineering. Part I. Traditional Factors”, Tissue Engineering, Volume 7, Number 6,2001,679-689.
25.Boyan BD et al., “Role of material surfaces in regulating bone and cartilage cell response”.Biomaterials 1996;17(2):137-146.
26.Yannas IV, Lee E et al., “Synthesis and characterization of a model extracellular matrix that induces partical regeneration of adult mammalian skin”. Proc Natl Acad Sci USA 1989;86-933.
27.Agrawal CM,McKinney et al., “Effects of fluid flow on the in vitro degradation kinetics of biodegradable scaffolds for tissue engineering. Biomaterials 2000;21:2443-53.
28.宋麟祥(工研院生醫中心生醫材料暨組織/工程技術組研究員)。
29.江卓培,“新式多光源系統之研發與固化收縮變形之分析”,國立台灣科技大學機械系博士學位論文,中華民國九十二年一月。30.Frederique Triaud, Diane-Helene et al., “Evaluation of Automated Cell Culture Incubators.” JALA December 2003.
31.Hak-Joon Sung et al., “The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis.”Biomaterials 25 (2004) 5735-5742.
32.Mayumi Shimizu, Yuichi Takakuwa, Sumio Nitta. “Study of stimulation-secretion coupling in a flow culture system:periodic secretion of hepatocyte growth factor by interleukin - 1α - stimulated human embryonic lung fibroblasts.”Biochimica et Biophysica Acta 1244 (1995) 357-362.
33.(http://www.tainstruments.com/) TA Instruments公司網頁。
34.蔡正彬,”應用快速原形技術線上製作組織工程支架之可行性研究”,國立台灣科技大學機械工程系碩士論文,中華名國九十三年。35.許富發,”特定單脈衝電磁場對尼古丁所引發造骨細胞凋亡之抑制效果”,私立中原大學醫學工程學系碩士論文,中華名國九十三年七月。36.呂桓综,”組織工程用精密支架之製造”,國立中央大學機械工程研究所碩士論文,中華名國九十一年七月。
37.Balooch G et al., “Evaluation of a new modulus mapping technique to investigate microstructural features of human teeth.”, J Biomech. 2004 Aug;37(8):1223-32.
38.Junro Yamashita et al., “Collagen and bone viscoelasticity:A Dynamic Mechanical Analysis.”, Biomed Mater Res. 2002;63(1):31-6.