參考文獻
[1]INTEL, "Intel Pentium 4 Processor 6xx Sequence and Intel Pentium 4 Processor Extreme Edition," November 2005.
[2]AMD, "AMD Athlon 64 Processor Power and Thermal Data Sheet," March 2006.
[3]Eck, Fans; design and operation of centrifugal, axial-flow, and cross-flow fans. New York,: Oxford, 1973.
[4]H. Fujita and H. Takata, "STUDY ON CONFIGURATIONS OF CASING TREATMENT FOR AXIAL FLOW COMPRESSORS," Nippon Kikai Gakkai Ronbunshu, B Hen, vol. 49, pp. 2945-2953, 1983.
[5]S. J. Venter and D. G. Kroeger, "Effect of tip clearance on the performance of an axial flow fan," Energy Conversion and Management, vol. 33, pp. 89-97, 1992.
[6]S. Akaike, K. Kikuyama, M. Kitada, and K. Kuwayama, "Study of rotational noise reduction for axial flow fan (analysis and estimation of secondary fan-noise component)," JSME International Journal, Series B, vol. 39, pp. 590-596, 1996.
[7]逢日豪, "軸流扇性能及噪音之改善研究,"機械工程系,碩士,國立台灣科技大學, 1998.
[8]K. Shimada, K. Kimura, and H. Watanabe, "A study of radiator cooling fan with labyrinth seal," JSAE Review, vol. 24, pp. 431-439, 2003.
[9]陳柏舟, "扇框開孔對軸流風扇流場之數值與實驗研究,"機械工程系,碩士,國立台灣科技大學, 2004.[10]E. M. Sparrow, "Heat transfer in fluid flows which do not follow the contour of bounding walls," Journal of Heat Transfer, Transactions ASME, vol. 110, pp. 1145-1153, 1988.
[11]R. W. Knight, J. S. Goodling, and B. E. Gross, "Optimal thermal design of air cooled forced convection finned heat sinks--Experimental verification," Austin, TX, USA, 1992.
[12]C. L. Chapman, S. Lee, and B. L. Schmidt, "Thermal performance of an elliptical pin fin heat sink," San Jose, CA, USA, 1994.
[13]S. Lee, "Optimum design and selection of heat sinks," IEEE Transactions on Components, Packaging, and Manufacturing Technology Part A, vol. 18, pp. 812-817, 1995.
[14]J. R. Culham and Y. S. Muzychka, "Optimization of plate fin heat sinks using entropy generation minimization," Thermomechanical Phenomena in Electronic Systems -Proceedings of the Intersociety Conference, vol. 2, pp. 8-15, 2000.
[15]C. K. Loh, D. Nelson, and D. J. Chou, "Thermal characterization of fan-heat sink systems in miniature axial fan and micro blower airflow," San Jose, CA, 2001.
[16]蔡凌群, "個人電腦散熱模組之分析研究,"機械工程系,碩士,國立台灣科技大學, 2003.[17]T. Q. Feng and J. L. Xu, "An analytical solution of thermal resistance of cubic heat spreaders for electronic cooling," Applied Thermal Engineering, vol. 24, pp. 323-337, 2004.
[18]吳兌倩, "流線型鰭片散熱座數值與實驗之整合研究,"機械工程系,碩士,國立台灣科技大學, 2004.[19]AMCA Standard 210-85, "Laboratory Method of Testing Fans for Aerodynamic Performance Rating," 1985.
[20]INTEL, "Intel Pentium 4 Processor on 90 nm Process in the 775-Land LGA Package," 2005.
[21]CNS 8753, "風扇、鼓風機、壓縮機噪音級測定法," 1982.
[22]ISO 3745, "Acoustics -- Determination of Sound Power Levels of Noise Sources Using Sound Pressure -- Precision Methods for Anechoic and Hemi-Anechoic Rooms," 1982.