[1] Whyte, W., “Cleanroom Design”, Second Edition, John Wiley &Sons Ltd, Chichester, October 1999.
[2] Murakami, S., Kato, S., and Suyama, Y., “Numerical Study on Diffusion of Fields as Affected by Arrangement of Supply and Exhaust Openings in Conventional Flow Type Cleanroom”, ASHRAE Transactions, Vol. 96, No. 2, pp. 343-355, 1989.
[3] Marvell, G., “Minienvironment Air Flow Dynamics”, Solid State Technology, Vol. 36, pp. 47-48, 1993.
[4] Abuzeid, S., “Comparing Various Types of Minienvironments”, IEEE/SEMI Advanced Semiconductor Manufacturing Conference, pp. 22-25, 1994.
[5] Chung, Kee-Chiang and Hsu, Shou-Ping, “Effect of Ventilation Pattern on Room Air and Contaminant Distribution”, Building and Environment, Vol. 39, pp. 989-998, 2001.
[6] 陳石法,“矩形空間中移動物體之動態流場與熱傳特性研究”,國立交通大學機械工程學系碩士論文,2001年.[7] 陳銘恩,“迷你環境潔淨室內空氣流場及微粒濃度控制分析”,國立交通大學碩士論文,2001年.[8] Yang, S. J., Fu, W. S., and Chen, S. F., “Numerical Study of Variations of Airflow Induced by a Moving Automatic Guided Vehicle in a Claenroom”, Journal of the Chinese Institute of Engineers, Vol. 25, No.1, pp. 67-75, 2002.
[9] Yang, S. J. and Fu, W. S., “A Numerical Investigation of Effects of a Moving Operator on Airflow Patterns in a Cleanroom”, Building and Environment, Vol. 37, pp. 705-712, 2002.
[10] Yamamoto, Toshiaki, Donovan, Robert, and Ensor, David, “Model Study for Optimization of Cleanroom Airflows”, The Journal of Environmental Sciences, pp. 24-29, 1988.
[11] 許文獻,“空調區間之室內污染物移除分析”,元智大學機械工程研究所碩士論文,1999 年.[12] Hu, S. C., Chuah, Y. K. and Yen, M. C., “Design and Evaluation of a Minievironment for Semiconductor Manufacture Processes”, Building and Environment, Vol. 37, pp. 201-208, 2002.
[13] 江秉芳,“在回風室安裝薄板的潔淨室內流場均勻度之影響”,大同大學機械工程研究所碩士論文,2003 年.[14] 劉啟熾,“TFT-LCD廠製程排氣系統之研究”,國立臺灣交通大學碩士論文,2003年.[15] Milberg, Joachim, Fischbacher, Johannes, and Engel, Andreas, “Fluidic Integration of Equipment in Cleanrooms”, Solid State Technology, pp. 43-45, August 1991.
[16] Tannous, A. G., “Computational Modeling of Air Flow in a Mini-Environment”, Proceedings of Institute of Environmental Science, pp. 414-420, 1996.
[17] Cheng, M., Liu, G. R., Lam, K. Y., Cai, W. J., and Lee, E. L., “Approaches for Improving Airflow Uniformity in Unidirectional Flow Cleanrooms”, Building and Environment, Vol. 34, Issue 3, pp. 275-284, 1998.
[18] Chen, C. W., “The Influence of Floor’s Porosity and Height on Airflow Distribution in Cleanroom”, Master Thesis, Department of Mechanical Engineering , Tatung University, June 2001.
[19] Lu, Weizhen and Howarth, Andrew T., “Numerical Analysis of Indoor Aerosol Particle Deposition and Distribution in Two-Zone Ventilation System”, Building and Environment, Vol. 3, pp 141-50, 1996 .
[20] 蔡俊宏,“潔淨室的氣流特性與潔淨度控制”,中國冷凍空調雜誌,pp.78-88,1999年6月.[21] 蔡俊宏,“潔淨室中潔淨度控制的實例探討”,中國冷凍空調雜誌,pp. 73-81,1999年8月.[22] Kobayashi, Y., Kobayashi, K., Kato, Tokunaga K., and Minami, T., “Particle Characteristics of 300mm Minienvironment (FOUP and LPU),” IEEE Transactions on Semiconductor Manufacturing, Vol. 13, No. 3, August 2000.
[23] 顏志銘,“超潔淨無塵室流場分析與改善之研究”,國立台北科技大學碩士論文,2000年.
[24] 蕭宗容,“ 300㎜晶圓載卸模組FOUP/LPU之氣流及污染物粒子特性研究”,國立台北科技大學冷凍空調工程系碩士論文,2002年.[25] 顏登通,“潔淨室設計與管理”,全華科技圖書股份有限公司,1995年。
[26] http://www.uisco.com.tw/
[27] Murakami, S., Kato, S., Nagano, S., and Tanaka, Y., “Diffusion Characteristics of Airborne Particles with Gravitational Settling in a Convection-Dominant Indoor Flow Field”, ASHRAE Transactions: Research, pp. 82-97, 1992.
[28] Murakami, S., Kato, S., and Suyama, Y., “Numerical and Experimental Study on Turbulent Diffusion Fields in Conventional Flow Type Clean Rooms”, ASHARE Transactions, Vol. 95, No. 2, pp. 469-493, 1988.
[29] Kuehn, T. H. and Thomas, H., “Computer Simulation of Airflow and Particle Transport in Cleanrooms”, Journal Environmental Sciences, Vol. 31, No. 5, pp. 21-27, 1988.
[30] Kuehn, T. H., Marple, V. A., Han, H., and Liu, D., “Comparison of Measured and Predicted Airflow Patterns in a Clean Room”, Proceedings-Institute of Environmental Sciences, Vol. 98, No. 2, pp. 331-336, 1988.
[31] http://www.biocozy.com.tw/clean.htm
[32] http://www.univic.co.kr/
[33] 黃仲龍,“ LCD工廠現況與降低成本挑戰”,工研院新興機械產
業技術簡訊,第26期,1993年1月。
[34] Launder, B. E. and Spalding, D. B., “Lectures in Mathematical Models of Turbulence”, Academic Press, London, England, 1972.
[35] Morsi, S. A. and Alexander, A. J. “An Investigation of Particle Trajectories in Two-Phase Flow Systems”, J. Fluid Mech, Vol. 2, pp. 193-208, January 1998.
[36] Haider, A. and Levenspiel, O., “Drag Coefficient and Terminal Velocity of Spherical and Nonspherical Particles”, Power Technology, Vol. 58: pp. 63-70, 1989.
[37] Li, A. and Ahmadi, G., “Dispersion and Deposition of Spherical Particles from Point Sources in a Turbulent Channel Flow”, Aerosol Science and Technology, Vol. 16, pp. 209-266, 1992.
[38] Saffman, P. G., “The Lift on a Small Sphere in a Slow Shear Flow”, J. Fluid Mech., Vol. 22, pp. 385-100, 1965.
[39] Van Doormal, J. P., and Rairhby, G. D., “Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows”, Numer. Heat Transfer, Vol. 7, pp. 147-163, 1984.
[40] Patankar, S. V. and Spalding, D. B., “A Calculation Procedure for Heat Mass and Momentum Transfer in Three-Dimensional Parabolic Flows”, International Journal of Heat Mass Transfer, Vol. 15, pp. 1787-1806, 1972.
[41] Fluent 6.1 User’s Guide, Fluent Inc. 2004.