跳到主要內容

臺灣博碩士論文加值系統

(18.204.48.64) 您好!臺灣時間:2021/08/04 18:58
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:朱晉儀
研究生(外文):Chin-Yi Chu
論文名稱:建構客製化產品設計管理系統之研究
論文名稱(外文):The Study on Construction of Design Management System for Custom-designed Product
指導教授:吳杉堯吳杉堯引用關係
指導教授(外文):Shan-Yau Wu
學位類別:碩士
校院名稱:國立高雄應用科技大學
系所名稱:工業工程與管理系碩士班
學門:工程學門
學類:工業工程學類
論文種類:學術論文
論文出版年:2007
畢業學年度:95
語文別:中文
論文頁數:109
中文關鍵詞:客製化產品設計系統工程IDEF0系統模擬實驗設計
外文關鍵詞:Custom-designed ProductSystem EngineeringIDEF0System SimulationDesign of Experiment
相關次數:
  • 被引用被引用:8
  • 點閱點閱:616
  • 評分評分:
  • 下載下載:251
  • 收藏至我的研究室書目清單書目收藏:1
由於現今經濟和社會環境的變遷,以及消費者對產品和服務要求的急遽改變,大量生產的典範漸漸受到挑戰,高品質的產品或系統,是一個企業提高競爭力及生存的不二法門。然而如何確保發展出一個高品質並且滿足顧客需要的產品或系統,有效的客製化產品設計管理系統是促使順利達成任務的主要因素。本研究主要分成兩階段模式進行客製化產品設計管理系統的建構以及驗證,首先利用系統工程以及IDEF0手法建構出客製化設計系統架構和客製化設計系統功能模組;接著透過個案分析進行系統模擬,最後利用實驗設計找出影響新產品研發流程的關鍵因素,提議客製化產品設計管理系統方案。本研究以訂單平均週期時間、設計人員利用率以及測試審核人員利用率三項績效指標針對個案公司進行模擬,從實驗結果可找出影響各績效指標的顯著因子,並依此對個案公司進行方案建議,以驗證本研究建構客製化產品設計管理系統之可行性。
According to the transition of economics and environment and the service requirements change by customers, the mass production model is questioned. A quality of a product or a system will directly influence the competition of it’s markets. Therefore the best way to live for companies is the high quality product and system. However, how to develop a product or a system to satisfy customers’ requirements is the design management system for custom-designed product. This study divides into two stages to construct and verify the framework of custom-designed product system. First, we construct the framework of the custom-design system and the functional modules of the design system by system engineering and IDEF0 methods. Second, we analyze the case and proceed to system simulation. Finally, we find out what the critical factors affect the process of new product development by the design of experiment, and then we suggest the schemes of the design management system for custom-designed product. This study uses three performance indicators, the average time of orders, the utilization of the designers and the utilization of the examiners, to proceed to system simulation for the case. We find out the critical factors affect the three performance indicators form the result of the experiment, and then we suggest the schemes to the case to verify the design management system for custom-designed product.
中文摘要 i
英文摘要 ii
致謝 iii
目錄 iv
表目錄 vi
圖目錄 vii
第一章 緒論 1
1.1 研究背景與動機 1
1.2 研究目的 1
1.3 研究流程與架構 2
第二章 文獻回顧探討 4
2.1 大量客製化 4
2.2 系統工程 7
2.2.1 系統工程之定義 7
2.2.2 系統工程之回顧 8
2.2.3 系統工程程序模式 11
2.3 IDEF方法論 14
2.4 新產品開發流程 16
2.4.1 新產品研發之定義 16
2.4.2 新產品研發流程 17
2.4.3 新產品研發績效管理 19
2.5 系統模擬 22
2.6 多變量變異數分析 25
第三章 建構客製化產品設計管理系統 29
3.1 兩階段模式 29
3.2 建構方法之階段一 30
3.2.1 客製化設計系統架構 30
3.2.2 客製化設計系統功能模組 37
3.3 建構方法之階段二 40
3.3.1 個案系統需求分析 41
3.3.2 系統模擬 41
3.3.3 實驗設計與執行 44
第四章 實證結果與分析 45
4.1 客製化設計系統架構 45
4.2 個案系統需求分析 45
4.3 系統模擬 47
4.4 實驗設計與執行 48
4.5 關鍵因子分析 55
4.6 設計/測試審核人員對訂單平均週期時間的敏感度分析 81
4.7 對個案設計管理系統之建議 84
第五章 結論與建議 86
5.1 結論 86
5.2 建議 87
參考文獻 88
附錄一 客製化系統架構 92
附錄二 重要因子實驗結果 96
中文部份:
[1]王啟彰,2004,彈性製造能力、物流能力與大量客製化及顧客價值關係之研究-國內資訊電子業之實證,國立東華大學,碩士論文。
[2]白宜弘,2000,餐飲業等候線之電腦模擬-王品牛排為例,私立東海大學,碩士論文。
[3]李宗儒、陳俊宏,1998,”批發市場作業流程模擬之研究-以彰化花卉批發市場為例”,台灣土地金融季刊,頁105-119。
[4]司徒達賢、李仁芳、吳思華,1985,企業概論,教育部空中大學教學委員會。
[5]林則孟,2001,系統模擬理論與應用,滄海書局。
[6]林英峰,2000,生產與作業管理講義-全球供應鏈管理之趨勢與應用。
[7]周碩彥,2006,”從大量生產到大量客製”,科學發展,399期,3月。
[8]姜林杰祐等編著,2001,系統模擬—eM-Plant(SiMPLE++) 操作與實務,華泰文化。
[9]許士軍,1994,現代行銷管理,商略印書館,台北市。
[10]陳順宇,2004,多變量分析,華泰書局。
[11]張政獻,2002,大量客製化的生產規劃與管理,國立台灣科技大學,碩士論文。
[12]Karl T. Ulrich, Steven D. Eppinger,2002,產品設計與開發,張書文、戴華亭譯,美商麥格羅希爾,臺北市
[13]馮信雄,2003,以簡易風險概念分析營建工程作業工期不確定性之研究,中華大學,碩士論文。
[14]Montgomery,2003,實驗設計與分析,黎正中、陳源樹譯,高立圖書有限公司。
[15]賴士葆,2000,”科技策略與新產品發展績效相關之研究”,科技管理論文集,大業文教基金會頁25-5。
[16]劉志明等編著,1992,”系統工程之回顧及其應用實例”,電信技術季刊,12卷,1期,頁1-19,8月。
[17]劉嘉偉,2002,新產品發展活動中行銷與工業設計部門互動程度與績效之相關性研究,國立政治大學,碩士論文。
[18]簡禎富,2005,架構新建半導體廠廠務工程專案管理流程之研究-以某半導體12吋廠實證研究,國立清華大學,碩士論文。

外文部份:
[1]Banks, J., et al., 1988, “Panel Session: Validation: Expanding the boundaries,” Proceeding of the Winter Simulation Conference, pp.402-407.
[2]Balci, O., 1994, “Validation, Verification, and Testing Techniques Throughout the Life Cycle of a Simulation Study,” Winter Simulation Conference, pp.215-220.
[3]Booz, Allen and Hamilton, 1982, New Product Management for the 1980’s, New York.
[4]Blanchard, B. S. and W. J. Fabrycky, 1981, Systems Engineering and Analysis, Prentice-Hall International Series in In.
[5]Christopher, M. and H. Peck, 1997, “Managing Logistics in Fashion Markets,” The international journal of Logistics Management, Vol. 8, No. 2, pp.63-74.
[6]Clark, K. B. and S. C. Wheelwright, 1992, Managing New Product and Process Development, Free Press, New York.
[7]Coates, J.F. and M.F. Wolff, 1995, “Customization promises sharp competitive edge,” Research Technology Management, Vol. 38(6), pp.6-7.
[8]Cooper, R.G., 1998, “Benchmarking New product Performance: Results of the Best Practices Study,” European Management Journal, Vol. 16(1), pp.1-17.
[9]Davila, T., 2000, “An empirical study on the drivers of management control systems' design in new product development,” Accounting, Organizations and Society, Vol. 25, No. 4, pp.383, May.
[10]Department of Defense, 1974, Engineering Management, MIL-STD-499A (USAF), pp. 11-18, May.
[11]Driva, H., et al., 2000, “Measuring product development performance in manufacturing organizations,” International Journal of Production Economics, Vol. 63, pp.147.
[12]Gilmore, J. H. and B. J. Pine, 1997, “The Four Faces of Mass Customization,” Harvard Business Review, Vol. 75(1), pp.91-101.
[13]Hall, A.D., 1965, “Systems Engineering from an Engineering Viewpoint,” IEEE Transactions on Engineering Management, Vol. SSC-1, pp.4-8, November.
[14]Hall, A.D., 1969, “Three-Dimensional Morphology of Systems Engineering,” IEEE Transactions on Engineering Management, Vol. SSC-5, pp.456-160, April.
[15]Helander, M.G. and J. Jiao, 2002, “Research on E-product Development (ePD) for Mass Customization,” Technovation, Vol. 22, pp. 717-724.
[16]Kotler, P., 1989, “From Mass Marketing to Mass Customization,” Planning Review, Vol. 17(5), pp. 10-13.
[17]Kotler, P., 1991, Marketing Management: Analysis, Planning and Control, Englewood Cliffs: Prentice-Hall Inc.
[18]Lampel, J. and H. Mintzberg, 1996, “Customizing Customization,” Sloan Management Reviews, Vol. 38(1), pp. 21-30.
[19]Law, A.M. and W.D. Kelton, 1991, Simulation Modeling and Analysis, McGraw-Hill, Inc.
[20]Lee, H.L., et al., 1993, “Hewlett-Packard Gains Control of Inventory and Service through Design for Localization,” Interfaces, Vol. 23(4), pp. 1-11.
[21]Marca, D.A. and C.L. McGowan, 1987, SADT Structured Analysis and Design Technique, McGraw-Hill, New York.
[22]Millett, S.M., 1990, “The Strategic Management of Technological R&D: An Ideal Process for the 1990s,” International Journal of Technology Management, Vol. 5, No. 2, pp. 153-163.
[23]Mosard, G.R., 1982, “A Generalized Framework and Methodology for Systems Analysis,” IEEE Transactions on Engineering Management, Vol. EM-29, No. 3, pp.81-87, August.
[24]Mpherson, P.K., 1980, “Systems Engineering: an approach to whole-system design,” The Radio and Electronic Engineer, Vol. 50, No. 11-12, pp. 545-558.
[25]Pine II, B.J., 1993, Mass Customization: The New Frontier in Business Competition, Harvard Business School Press, Boston.
[26]Rochford, L. and W. Rudelius, 1997, “New Product Development Process,” Industrial Marketing Management, Vol. 26(10), pp. 67-84.
[27]Sage, A.P., 1997, Introduction to Systems Engineering Electrical and Electronics Engineer, pp.1-10.
[28]Sargent, R.G., 1996, “Verifying and Validating Simulation Models,” Proceedings of the 1996 Winter Simulation Conference.
[29]Shannon, R.E., 1975, System Simulation the Art and Science, Prentice-Hall, Englewood Chiff, New Jersey.
[30]Silveira, G.D., et al., 2001, “Mass Customization: Literature Review and Research Directions,” International Journal of Production Economics, Vol. 72, pp. 1-13.
[31]Song, X.M. and M. M. Montoya-Weiss, 1998, “Critical Development Activities for Really New Versus Incremental Products,” Journal of Product Innovation Management, Vol. 15, pp. 124-135.
[32]Souder, W.E., et al., 1998, “Environmental Uncertainty, Organizational Integration, and New Product Development Effectiveness: A Test of Contingency Theory,” Journal of Product Innovation Management, Vol. 15, pp. 520-533.
[33]Sua, J.C.P., et al., 2005, “Evaluation of Postponement Structures to Accommodate Mass Customization,” Journal of Operations Management, Vol. 23, pp. 305-318.
[34]Yang, B. and N. Burns, 2003, “Implications of Postponement for The Supply Chain,” International Journal of Production Research, Vol. 41, pp. 2075-2090.
[35]Zeigler, B.P., 1984, “System-theoretic representation of simulation model,” Transactions of Institute of Industrial Engineers, Vol. 16, No. 1, pp. 19-34.
[36]Zong L. and W. Jin, 1986, “Product Development Strategy: An Integration of Technology and Marketing,” Journal of Product Innovation Management, Vol. 2, No. 1, pp. 25-33.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊