臺灣博碩士論文加值系統

隨著智慧型手機與3G手機的普及化,多頻帶天線設計的需求越來越多。在益趨小型化、薄型化的手機機殼中，多頻天線設計的複雜度將大幅增加。一般來說，手機天線的擺放位置、使用材料、使用面積與體積、手機天線的高度都是內置天線重要的課題。本論文將著重在使用單塊印刷電路板雙層金屬面的內置天線設計，雙層金屬面使用Via Holes來做連接。這類雙層天線設計包含PIFA與Patch天線兩種共振模態。基本的設計技巧、模擬與量測的特性比較都是主要的討論範疇。

Nowadays, wireless communication technologies have become widespread in the world, and the mobile phone performs a leading role in wireless communication. The pursuit of manufacturing smaller and better cell phones increases day by day and combining multi-systems in a single smart phone is the current trend in recent years. Thus, the antenna design for handheld devices turns into a challenge. The location of the antenna, the material used, and the size of the antenna are the main concerns in antenna designs. This thesis concentrates on dual layer antenna design on the Printed Circuit Board for cellular phones with two resonant mechanisms, such as PIFA and patch resonance. Details of the design are presented. Simulated and measured antenna characteristics are also presented and compared with each other.

Contents
口試委員會審定書………………………………………………………...i
誌謝………………………………………………………………………ii中文摘要………………………………………………………………….iii Abstract…………………………………………………………………iv
Contents………………………………………………………………….v
List of Tables………….………………………………………………….vii
List of Figures…………………………………………………………viii

Chapter 1 Introduction
1.1 Motivation and Literature Survey……………..……………….1 1.2 Chapter Outlines……………………………...………………...5

Chapter 2 Antenna Theory for Internal Antenna in Handheld Devices
2. 1 Inverted F Antenna (IFA)………………………………………6
2.2 Planar Inverted F Antenna (PIFA)……………………………...9
2.2.1 Introduction…………………………………………....9
2.2.2 Far Field Pattern for rectangular PIFA Antenna from Cavity Mode…………….……………………………………………..13
2.2.3 The Finite Ground Effect of Rectangular PIFA…………...18
2.3 Low Profile Monopole Antenna………………………………28
2.4 E-Shaped Patch Antenna………………………………………31

Chapter 3 Dual-layer Multi-band Internal Antenna Design for Handheld Devices
3.1 Introduction………………………………………….………34
3.2 Dual-layer Quad-band Internal Antenna Design………..37
3.2.1 Feeding Structure………………………………………...37
3.2.2 The Dual-layer Quad-band Internal Antenna Design…....40
3.2.3 Measurement Result and Discussion………………....50
3.3 Dual-layer Octal-band Internal Antenna Design………………60
3.3.1 Dual-layer Octal-band Internal Antenna Design…………...60
3.3.2 Measurement Result and Discussion……………………….65

Chapter 4 Conclusion………………………………………………..80
References…………………………………………………………….…82

Reference
[1] S. Hayashida, T. Tanaka, H. Morishita, Y. Koyanagi, and K. Fujimoto,
“Built-in folded monopole antenna for handsets,”Electronics Letters , Vol. 40, Issue 24, pp. 1514-1516, Nov. 25, 2004.
[2] Kin-Lu Wong, Gwo-Yun Lee, and Tzung-Wern Chiou,
”A low-profile planar monopole antenna for multiband operation of mobile handsets,” IEEE Trans. Antennas and Propagation, Vol. 51, Issue 1, pp.121-125, Jan. 2003.
[3] Y. Kawano, S. Hayashida, S. Bae, Y. Koyanagi, and H. Morishita,
“A study on miniaturization of 900 MHz and 2 GHz band antennas utilizing magnetic material,” IEEE Antennas and Propagation Society International Symposium, Vol. 3B, pp.347-350, July 2005
[4] P. Vainikainen, J. Ollikainen, O. Kivekas, and K. Kelander,
“Resonator-based analysis of the combination of mobile handset antenna
and chassis,” IEEE Trans. Antennas Propagation, vol. 50, no. 10, pp.1433–1444, Oct. 2002.
[5] Hong-Twu Chen, Kin-Lu Won, and Tzung-Wern Chiou,
“PIFA with a meandered and folded patch for the dual-band mobile phone application,” IEEE Trans. Antennas and Propagation, Vol. 51, Issue 9, pp.2468-2471, Sep. 2003.
[6] C.R. Rowell, and R.D. Murch,
“A capacitively loaded PIFA for compact mobile telephone handsets,” IEEE Trans. Antennas and Propagation, Vol. 45, Issue 5, pp.837-842, May 1997.
[7] P. Ciais, R. Staraj, G. Kossiavas, and C. Luxey,
“Design of an internal quad-band antenna for mobile phones,” IEEE Microwave and Wireless Components Letters, Vol. 14, Issue 4, pp.148-150,April 2004.
[8] Zhan Li, and Y. Rahmat-Samii,
“Optimization of PIFA-IFA combination in handset antenna designs,” IEEE Trans. Antennas and Propagation, Vol. 53, Issue 5, pp.1770-1778,May 2005.
[9] W.-I. Kwak, S.-O. Park, and J.-S. Kim,
“A Folded Planar Inverted-F Antenna for GSM/DCS/Bluetooth Triple-Band Application,” IEEE Antennas and Wireless Propagation Letters, Vol. 5, Issue 1, pp.18-21, Dec. 2006.
[10] V. Antonchik, and R. Vaughan,
“Far field pattern for rectangular PIFA antenna from the cavity model,” IEEE, Antennas and Propagation Society International Symposium, 2005, Vol. 2B, pp.226-229, July 2005.
[11] F. Yang, Xue-Xia Zhang, Xiaoning Ye, and Y. Rahmat-Samii,
“Wide-band E-shaped patch antennas for wireless communications,” IEEE Trans. Antennas and Propagation, Vol. 49, Issue 7, pp.1094-1100, July 2001.
[12] Omar A. Saraereh, M. Jayawardene, P. McEvoy, and D. C. Vardaxoglou
“Quad-Band Handset Antenna Operation for GSM900/DCS1 800/PCS1900/UMTS,” Centre for Mobile Communications Research, Department of Electronic and Electrical Engineering, Loughborough University
[13] B. Sanz-Izquierdo, J.C. Batchelor, R.J. Langley, and M.I. Sobhy,
“Single and double layer planar multiband PIFAs,” IEEE Trans. Antennas and Propagation, Vol. 54, Issue 5, pp.1416-1422,May 2006.
[14] M.-C. Huyn, and W. Stutzman,
“Ground plane effects on planar inverted-F antenna (PIFA) performance,” IEE Proceedings Microwaves, Antennas and Propagation, Vol. 150, Issue 4, pp.209-213, Aug. 2003.
[15] Kevin R. Boyle, and Leo P. Ligthart,
“Radiating and balanced mode analysis of PIFA antennas,” IEEE Trans. Antennas and Propagation, Vol. 54, Issue 1, pp.231-237, Jan. 2006.
[16] Min-Seok Han and Hong-Teuk Kim,
“Compact five band internal antenna for mobile phone,” IEEE Antennas and Propagation Society International Symposium 2006, pp.4381-4384.