跳到主要內容

臺灣博碩士論文加值系統

(3.231.230.177) 您好!臺灣時間:2021/07/27 10:20
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:林威佐
研究生(外文):wei-tso lin
論文名稱:內含相變化微膠囊的溫控材料之熱傳行為
論文名稱(外文):Heat Transfer Behavior of Temperature-Controlled Mediawith Microencapsulated Phase Change Materials
指導教授:林明澤林明澤引用關係
學位類別:碩士
校院名稱:國立中興大學
系所名稱:精密工程學系所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
畢業學年度:96
語文別:中文
論文頁數:63
中文關鍵詞:微膠囊相變化材料微膠囊相變化材料
外文關鍵詞:MPCMphase change materialsmicroencapsulation
相關次數:
  • 被引用被引用:5
  • 點閱點閱:314
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
相變化材料是一種具有儲能行為的材料,藉由吸放熱的行為可用來控制溫度的改變量。相變化溫控材料的發展主要分相變化材料的選用與改進、相變化材料與基體材料的複合方法、相變化溫控材料的熱傳表現三個方面的內容。透過微粒包覆技術將相變化材料製作成微膠囊相變化材料,提供一種新式材料應用在溫控材料上。本實驗針對微膠囊相變化材料混入基體材料而製備的溫控材料,以掃描式電子顯微鏡觀察複合狀態,並模擬白天升溫或夜間降溫的改變下,依照含量比例、厚度…等變因,觀測其熱傳行為的表現。實驗結果顯示,內含相變化微膠囊的溫控材料能延緩溫度的上升或下降,另外也發現因為微奈米尺度的影響,溫控材料有著不同以往的熱傳行為。
Phase Change Materials (PCM) is a material having energy store capability that can be used for temperature-controlled through absorbing or releasing heat. The study on the development of temperature-controlled material with PCM can be characteristic in the selection of PCM, and improvement of PCM, and the blending methods with the base material with respect to its heat transfer behavior in this study, with the use of cladding technology makes it possible to have PCM manufactured Microencapsulated Phase Change Materials (MPCM). This is a novel properties can be used in the application of temperature-controlled industry and construction. The performance experiments show that the temperature-controlled materials which content MPCM having the ability to delay the temperature arising or dropping form outside, moreover it was found that these temperature-controlled materials having different performance in heat transfer behavior due to the scale effects.
摘要 i
Abstract ii
目錄 iii
圖目錄 v
表目錄 vii
第一章 序論 1
1.1 研究背景 1
1.2 研究目的 3
第二章 原理與應用 7
2.1 微膠囊相變化材料原理 7
2.1.1 微膠囊技術 7
2.1.2 相變化材料 9
2.1.3 微膠囊相變化材料 14
2.2 微膠囊相變化材料與建築材料的結合 16
2.2.1 前言 16
2.2.2 MPCM油漆 16
2.2.3 MPCM石膏板 21
第三章 實驗設計與架構 23
3.1 前言 23
3.2 實驗架構 24
3.2.1實驗模型 24
3.2.2實驗設備與材料 27
3.3實驗步驟 32
3.3.1 無執行夜間通風 32
3.3.2 有執行夜間通風 32
第四章 結果與討論 34
4.1 前言 34
4.2 MPCM油漆量測結果 34
4.2.1 MPCM油漆之熱傳現象 34
4.2.2 MPCM油漆的日間隔熱效益 38
4.2.3 MPCM油漆的夜間溫控效益 39
4.3 MPCM石膏板量測結果 43
4.3.1 MPCM石膏板之熱傳現象 43
4.3.2 MPCM石膏板無執行夜間通風之溫控效益 46
4.3.3 MPCM石膏板有執行夜間通風之溫控效益 51
4.4 溫度效應 53
第五章 結論與未來展望 57
5.1 結論 57
5.2 未來展望 60
參考文獻 61
[01] Kurklu A. “Energy storage applications in Greenhouse by means of phase change material: a review.” Renewable Energy 13(1): 89-103. 1998.

[02] Bellettre J., Sartre V., Biais F., Lallemand A. “ Transient state study of electric motor heating and phase change solid-liquid cooling.” Applied Thermal engineering 17(1): 17-31. 1997.

[03] Herbig, J. H., “Microencapsulation,” Encyclopedia of Polymer Science and Technology, Interscience, New York, 8, 719, 1968.

[04] El-Helw, A., El-said, Y., and Ramadan, E., Effect of coremodification on the release and bioavailability of phenazopyridinehydrochloride from ethylcellulose-walled microcapsules, Acta Pharm. Fennica,97,29, (1988).

[05] Bhandari B, D''Arcy BR, Padukka I. Encapsulation of lemon
oil by paste method using a-cyclodextrin: encapsulation
efficiency and profile of oil volatiles. J Agric Food Chem. 47:
5194-5197. (1999)

[06] Sultana K, Godward G, Reynolds N, Arumugaswamy R, Peiris P,
Kailasapathy K. Encapsulation of probiotic bacteria with
alginate–starch and evaluation of survival in simulated gastrointestinal conditions and in yoghurt. Inter J Food Microbio. 62:47–55. (2000)

[07] 曾元宏、楊毓民 “相變材料微膠囊之製備及其特性分析” 國立成功大學化學工程研究所碩士論文。2001。

[08] Darkwa K. “Evaluation of regenerative phase change drywalls: low-energy buildings application.” Int. J. Energy Res. 23(14): 1205-1212. 1999.

[09] Amar M. Khudhair “A review on energy conservation in building applications with thermal storage by latent heat using phase change materials.” Energy Conversion and Management 45 (2004) 263–275.2004

[10] Darkwa K. “Thermal Analysis of Composite Phase Change Drywall Systems.”2005.

[11] 陳士琦、何清政 “相變化材料微粒懸浮流體之相關熱物性質實驗量測與分析” 國立成功大學化學工程研究所碩士論文。2003。

[12] Chowdary, K. P. R. and Sri, R. M. A., “Microencapsulation in Pharmacy,”Indian Drugs, Vol. 25, p. 389, 1998.

[13] Das, K. G., “Bioengineering Aspects,” Controlled Release Technology, John Wiley & Sons, New York, 1983.

[14] Vandegaer J. E. “Microencapsulation Processes and Applications.” Phenum Press, New York, 1974.

[15] Baxter G., ”Process for Making Dual Walled Microcapsules”, United States Patent, US3578605, 1971.

[16] R. Jian, Study of the technique and theory of phase change thermal storage applied in air conditioning thermal storage equipment, Master’s Thesis, Department of Building Environment and Facilities Engineering, Beijing University of Technology, Beijing, 2004.

[17] H. Chen, Jian Zhu Huan Jing Xue, China Machine Press, Beijing, 2005 ,p.9.

[18] Hale, D. V., Hoover, M. J. and O’Neill, M. J., “Phase Change Material Handbook.” NASA CR-61363, 1971.

[19] Roy, S. K., and Sengupta, S., “An Evaluation of Phase Change
Microcapsules for Use in Enhanced Heat Transfer Fluids,” Int. Comm.
Heat Mass Transfer, Vol. 18, pp. 495-507, 1991.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top