臺灣博碩士論文加值系統

過去的製造業以大量的生產方式及規模經濟來降低成本，但現今的製造業卻面臨了不同以往的競爭環境。傳統的單一產品大量生產的方式已無法滿足顧客多樣化的需求，另一方面製造業要能迅速回應市場並降低庫存，在這些前提之下製造業還必需能兼顧成本。近年來，學者發展出許多新的生產策略，如精練生產和大量客製化等觀點作為製造業因應市場快速變遷之道；而這些對於供應鏈管理帶來很多的挑戰。回顧過去的文獻關於供應鏈管理、精練生產與大量客製化這三者個別對於公司製造績效的影響已有許多的探討，但供應鏈管理對於精練生產程度與大量客製化程度的影響卻甚少探討。本研究將先藉由文獻探討來建立模式，參考2007年天下雜誌公佈的台灣製造業1000大排名，並以此1000大企業為研究對象，實證資料採用結構方程式模式進行分析，所得的因子負荷量與路徑係數評鑑最佳配適模式之配適度並檢定本研究假設。研究結果發現，供應鏈管理支持研究假設，對精練生產程度與大量客製化程度產生正向的影響；精練生產程度與大量客製化程度此兩者支持研究假設，對製造績效產生正向的影響。本研究建議，對於採行精練生產或是大量客製化的台灣製造業提出的參考建議為: 透過供應鏈管理的做法可提昇精練生產程度與大量客製化程度，而精練生產程度與大量客製化程度此兩者的提昇有助於製造績效的提昇。實行供應鏈管理做法方面: 實務上主要是強化(1)供應鏈關係的建立(2)與上下游廠商的互信程度(3)與上下游廠商資訊共享(4)與上下游廠商利害與共之共識。

In contrast to the traditional manufacutring activities, in which mass production and scale of economics are the two methods applied to lower the cost, the manufacturing industry these days are meeting a completely different challenging atmosphere, where mass production of single product can no longer meet the customer demand for diversity. On the other hand, the manufacturing industry is urged to respond rapidly to the market while lowering its stock and, in addition to all the above, the industry needs to take care of its cost as well. Over the years, a large number of new manufacturing strategies have been released by scholars, namely, lean production and mass customization among other points of stand, all trying to help making the manufacturing industry become more responsive to the changing market. All these considerations indicated above suggest challenges to the supply chain management. The literature review we have access to show a large number of discussions over the impacts of supply chain management, lean production and mass customization on manufacturing performance of a corporate and are about the impacts of supply chain management on lean production and mass customization. Based on literature review, the framework of this research is established. The research in question is conducted on the top 1,000 Taiwanese manufacturers announced by the Common Wealth Magazine in 2007 through a mailing survey. The analysis of empirical data is conducted on the structural equation modeling, where the factor loadings and path coefficients are used to evaluate the fitness of the best fitting model and to test the hypotheses in this research. The result of this research suggests that supply chain management does support the hypothesis in this research and mean positive impacts on lean production and mass customization. Both the level of lean production and mass customization support the hypothesis in this research and creates positive impacts on manufacturing performance. In this research, we would like to suggest the following to Taiwanese manufacturing industry that opts for either lean production or mass customization: Supply chain management does help upgrade the level of lean production and mass customization and upgrading both the level of lean production and mass customization helps improving manufacturing performance. When it comes to implementing supply chain management, in practice, it is to (1) establish the close relationship with supply chain members; (2) enhance mutual trust with the up and down stream firms; (3) share information with the up and down stream firms and (4) establish consensus on mutual benefits with the up and down stream firms.

頁碼
摘要 i
ABSTRACT iii
致謝辭 v
目錄 vi
表目錄 viii
圖目錄 ix
第一章 前言 1
第一節 研究背景與動機 1
第二節 研究目的 3
第三節 研究流程 3
第二章 文獻探討 5
第一節 供應鏈管理的定義與其衡量指標 5
第二節 精練生產的定義與其程度的衡量指標 9
第三節 大量客製化的定義與其程度的衡量指標 13
第四節　製造績效的定義與其衡量指標 16
第五節　各構面間的關係 19
第三章 研究方法 22
第一節 研究架構 22
第二節 研究假設 23
第三節 變數衡量 23
第四節 研究對象與資料蒐集 26
第五節 分析方法 26
第四章 資料分析與探討 27
第一節 敘述性統計 27
第二節 探索性因子分析 29
第三節 信度分析 32
第四節 結構方程式建模 32
第五節 討論與管理意涵 38
第五章 結論與建議 39
第一節 結論 39
第二節 建議 40
第三節 研究限制 40
參考文獻 42
附錄 51

林震岩，多變量分析：SPSS的操作與應用(再版)，智勝出版社，2007年。
劉亭吟，”供應鏈管理對產品多角化與企業績效間關係之影響”，大同大學事業經營研究所碩士論文，2003年。
Aaker, D. A. “How to Select a Business Strategy.” California Management Review 26, no.3 (1984): 167-176.
Anderson, D. Agile Product Development For Mass Customization: How To Develop And Deliver Products For Mass Customization, Niche Markets, JIT, Build-to-order, and Flexible Manufacturing, IL: Irwin, 1997.
Ansoff, H. I. Corporate Strategy, New York: McGraw Hill, 1965.
Bamberger, I. “Developing Competitive Advantage in Small and Medium Size Firms.” Long Range Planning 22, no.5 (1989): 80-88.
Bendell, T. “A Review and Comparison of Six Sigma and The Lean Organizations.” The TQM Magazine 18, 2006.
Bonavia, T. and J. A. Marin. “An Empirical Study of Lean Production in The Ceramic Tile in Dustry in Spain.” International Journal of Operation and Production Management 26, (2006): 505-531.
Chaneski, W. S. “Mapping a Path to Lean Manufacturing.” Modern Machine Shop 75, no.5 (2002): 43-52.
Chopra, S. and P. Meindl. Supply Chain Management: Strategy, Planning and Operation, 3rd ed., New Jersey: Prentice-Hall, 2007.
Christopher, M. Logistic and Supply Chain Management: Strategies for Reducing and Improving Service, London: Pitman, 1992.
Chung, S., H. Sing, and K. Lee. “Complementarity, Status Similarity and Social Capital as Drivers of Alliance Formation.” Strategic Management Journal 21, (2000): 1-22.
Cooper, M. C. and M. E. Lisa. ”Characteristics of Supply Chain Management and Implication for Purchasing and Logistics Strategy.“ The International Journal of Logistics Management 4, no.2 (1993): 16-20.
Cooray, S. and J. Ratnatunga. “Buyer-Supplier Relationships: A Case Study of a Japanese and Western Alliance.” Long Range Planning 34, (2001):727-740.
Croom, S., P. Romano, and M. Giannakis. “Supply Chain Management: An Analytical Framework for Critical Literature Review.” European Journal of Purchasing and Supply Management 6, (2000): 67-83.
Cuatrecasas, L. “Design of A Rapid Response and High Efficiency Service by Lean Production Principles Methodology and Evaluation of Variability of Performance.” International Journal of Production Economics 80, (2002): 169-183.
David, F. R. Competing through Supply Chain Management: Creating Market-Wining Strategies through Supply Chain Partnership, London: Chapman and Hall, 1998.
Davis, S. “From Future Perfect: Mass Customizing.” Planning Review 17, no.2 (1989): 16-21.
Ehrlich, B. H. “Service with a Smile.” Industrial Engineer 38, (2006): 40-44.
Ellram, L. M. “Supply Chain Management.” International Journal of Physical Distribution and Logistics Management 21, (1991): 13-33.
Elmuti, D. “The Perceived Impact of Supply Chain management on Organizational Effectiveness.” Journal of Supply Chain Management 38, (2002): 49-57.
Fine, C. H. and A. C. Hax. “Manufacturing Strategy:A Methodology and Illustration.” Interfaces 15, no.6 (1985):28-46.
Frohlich, M. T. and R. Westbrook. “Arcs of Integration: An International Study of Supply Chain Strategies.” Journal of Operations Management 19, (2001): 185-200.
Frutos, J. D. and D. Borenstein. “A Framework to Support Customer-Company Interaction in Mass Customization Environments.” Computers in Industry 54, (2004): 115-135.
Garvin, D. A. “Competing on the Eight Dimensions of Quality.” Harvard Business Review 65, no.6 (1987): 101-110.
George, S. Day. Strategy Market Planning: The Pursuit of Competitive Advantage, Minnesota: West Publishing Company, 1984.
Goldman, S. L., R. N. Nagel, and K. Preiss. Agile Competitors and Virtual Organizations: Strategies for Enriching the Customer, New York: Van Nostrand Reinhold, 1995.
Hofer, C. W. and D. Schendel. Strategy Formulation: Analytical Concept. St. Paul: Mn West Publishing, 1978.
Houshmand, Mahmoud and Bizhan Jamshidnezhad. “An Extended Model of Design Process of Lean Production Systems by Means of Process Variables.” Robotics and Computer-Integrated Manufacturing 22, (2006): 1-16.
Johnson, J. C. and D. F. Wood. Contemporary Logistics, New Jersey: Prentice-Hall Upper Saddle Creek, 1996.
Juliana, H. M. and S. L. Tage. “Supply-Chain Integration: Implications for Mass Customization, Modularization and Postponement Strategies.” Production Planning & Control, 15, no.4 (2004): 352-361.
Kai, J., H. L. Lee, and R. W. Seifert. “Satisfying Customer Preferences via Mass Customization and Mass Production.” IIE Transactions 38, no.1 (2006): 25-38.
Kannan, V. R. and K. C. Tan. “Just in Time, Total Quality Management, and Supply Chain Management: Understanding Their Linkages and Impact on Business Performance.” The International Journal of Management Science 33, (2005): 153-162.
Kay, M. J. “Making Mass Customization Happen: Lessons for Implementation.” Planning Review 21, no.1 (1993): 14-18.
Kopczak, L. R. “Logistics Partnership and Supply Chain Restructuring: Survey Results from the US Computer Industry.” Production and Operations Management 6, (1997): 226-247.
Koufteros, X. A., M. A. Vonderembse, and W. J. Doll. “Competitive Capabilities: Measurement and Relationships.” Proceedings Decision Science Institute (1997):1067-1068.
Krajewski, Lee J., and Larry P. Ritzman. Operations Management: Strategy and Analysis, 5th ed., U.S.: Addison-Wesley Publishing Co., 1999.
Krajewski, L. J., L. P. Ritzman, and M. K. Malhotra. Operations Management Processes and Value Chains, 8th ed., New Jersey: Pearson Prentice Hall, 2007.
Lee, Hau L. “The triple-A supply chain.” Harvard Business Review 82, no.10 (2004): 102-112.
Lee, H. L. and C. Billington. “Managing Supply Chain Inventory: Pitfalls and Opportunities.” Sloan Management Review 33, (1992): 65-73.
Lee, H. L. and S. M. Ng. “Introduction to the Special Issue on Global Supply Chain Management.” Production and Operation Management 6, no.3 (1997): 191-192.
Li, S., B. Ragu-Nathan., T. S. Ragu-Nathan, and S. Subb Rao. “The Impact of Supply Chain Management Practices on Competitive Advantage and Organizational Performance.” Omega 34, (2006): 107-24.
Levy, David L. “Lean Production in an International Supply Chain.” Sloan Management Review 38, no.2 (1997): 94-95.
McGinnis, M. A. and R. M. Vallopra. “Purchasing and Supplier Involvement in Process Improvement: A Source of Competitive Advantage.” Journal of Supply Chain Management 35, no.4 (1999): 42-50.
McIvor, R. “Lean Supply: The Design and Cost Reduction Dimensions.” European Journal of Purchasing & Supply Management 7, (2001): 227-242.
Narasimhan, Ram and Soo Wook Kim. “Effect of Supply Chain Integration on the Relationship between Diversification and Performance: Evidence from Japanese and Korean Firm.” Journal of Operations Management 20, (2002): 303-323.
Nicholas, J. Competitive Manufacturing Management: Continuous Improvement, Lean Production, Customer-Focused Quality, New York: McGraw-Hill, 1998.
Panizzolo, R. “Applying the Lessons Learned from 27 Lean Manufacturers.The Relevance of Relationships Management.” International Journal of Production Economics 55, (1998):223-240.
Partanen, J. and H. Haapasalo. “Fast Production for Order Fulfillment: Implementing Mass Customization in Electronics Industry.” International Journal of Production Economics 90, (2004): 213-222.
Pine, J. B. Mass Customization: The New Frontier in Business competition. Boston, MA: Harvard Business School Press, 1993.
Potter, Andrew, Rainer Breite, Mohamed Naim, and Hannu Vanharanta. “The Potential for Achieving Mass Customization in Primary Production Supply Chains via A Unified Taxonomy.” Production Planning & Control 15, no.4 (2004): 472-481.
Richard, B. Chase, J. Aquilano Nicholas, and F. Jacobs Robert. Operations Management for competitive Advantage, N.Y.: McGraw-Hill Press, 2001.
Rigby, C., M. Day, P. Forrester, and J. Burnett. “Agile Supply: Rethinking Systems Thinking, Systems Practice.” International Journal of Agile Management Systems 2, (2000): 178-186.
Ross, David F. Competing through Supply Chain Management: Creating Market-Winning Strategies Through Supply Chain Partnerships, London: Chapman & Hall, 1997.
Roth, A. V. and C. A. Giffi. “Critical Factors for Achieving World Class Manufacturing.” OM Review 10, no.2 (1995): 1-29.
Sahin, F. “Manufacturing Competitiveness: Different Systems to Achieve the Same Results.” Production and Inventory Management Journal 1, no.4 (2000): 56-65.
Saunders, M. J. “Chains, Pipelines, Networks and Value Stream: the Role, Nature and Value of Such Metaphors in Forming Perceptions of the Task of Purchasing and Supply Management.” First Worldwide Research Symposium on Purchasing and Supply Chain Management (1995): 476-485.
Scarbrough, H., F. Caniato, and G. Spina. “Forget Japan: The Very British Response to Lean production.” Employee Relations 20, no.5 (1998): 224-236.
Schary, Philip P. and James Coakley. “Logistics Organization and the Information System.” The International Journal of Logistics Management 2, no.2 (1994): 22-29.
Schonberger, Richard J. “Frugal Manufacturing.” Harvard Business Review 65, no.5 (1987): 95-100.
Selladurai, R. S. “Mass Customization in Operations Management: Oxymoron or Reality.” Journal of Operations Management 32, no.4 (2004): 295-300.
Shah, R. and P. T. Ward. “Lean Manufacturing: Context, Practice Bundles, and Performance.” Journal of Operations Management 21, (2003): 129-149.
Shah, Rachna and Peter T. Ward. “Defining and Developing Measures of Lean Production.” Journal of Operations Management 25, (2007): 785-805.
Silveria, G. D., D. Borenstein, and F. S. Fogliatto. “Mass Customization: Literature Review and Research Directions.” International Journal of Production Economics 72, (2001): 1-13.
Skinner, W. “Manufacturing-Missing Link in Corporate Strategy.” Harvard Business Review 50, (1969): 136-145.
Stevens, G. C. “Integrating the Supply Chain.” International Journal of Physical Distribution and Materials Management 19, no.8 (1989): 3-8.
Stevenson, W. Operations management, 7th ed., New York: McGraw-Hill, 2002.
Storch, R. and S. Lim. “Improving Flow to Achieve Lean Manufacturing in Shipbuilding.” Production Planning and Control 10, no.2 (1999): 127-137.
Toffler, A. Future Shock, New York: Bantam, 1970.
Tracey, M. A. and M. A. Vonderembse. “Building Supply Chains: A Key To Enhanced Manufacturing Performance.” Proceeding of the Decision Science Institute (1998): 1184-1186.
Tracy, M. A., M. A. Vonderembse, and J. S. Lim. “Manufacturing Technology and Strategy Formulation: Keys to Enhancing Competitiveness and Improving Performance.” Journal of Operations Management 17, no.4 (1999): 411-428.
Treville, S. and J. Antonakis. “Could Lean Production Job Design be Intrinsically Motivating? Contextual, Configurational, and Levels-of-analysis Issues.” Journal of Operations Management 24, no.2 (2006): 99-123.
Tu, Q., M. A. Vonderembse, and T. S. Rang-Nathan. “The Impact of Time-Based Manufacturing Practices on Mass Customization and Value to Customer.” Journal of Operation Management 19, (2001): 201-217.
Turowski, K. “Agent-Based E-Commerce in Case of Mass Customization.” International Journal of Production Economics 75, (2002): 69-81.
Wall, N. C. “From Bespoke Solution to Mass Customization.” BT Technology Journal 18, no.2 (2000): 116-125.
Waller, Derek L. Operation Management, U.S: An International Thomson Publishing Company, 1998.
Ward, P. T., K. K. Boyer, G. K. Leong, and L. J. Krajewski. “Competitive Priorities in Operations Management.” Decision Sciences 29, no.4 (1998): 1035-1046.
Warnecke, H. J. and M. Huser. “Lean production.” International Journal of Production Economics 41, (1995): 37-43.
Womack, J., D. Jones, and D. Roos. The Machine that Changed the World, New York: Rawlinson Associates, (1990).
Yeh, Kun-Huang and Sun-Peir Su. “The Implementation Strategy of JIT Production System: An Empirical Study.” Tatung Journal 22, (November 1992):141-168.