(44.192.66.171) 您好!臺灣時間:2021/05/18 01:24
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果

詳目顯示:::

: 
twitterline
研究生:張柏彥
研究生(外文):Po-Yen Chang
論文名稱:高功因昇壓式轉換器不同控制方法之模擬與特性比較
論文名稱(外文):Simulation and Performance Comparison of Different Control Methods for HPF Boost Converte
指導教授:陳明堂陳明堂引用關係
指導教授(外文):Ming-Tang Chen
學位類別:碩士
校院名稱:國立高雄應用科技大學
系所名稱:電機工程系
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2009
畢業學年度:97
語文別:中文
論文頁數:72
中文關鍵詞:交流/直流轉換器昇壓型轉換器功率因數修正數位控制模擬
外文關鍵詞:AC /DC ConverterBoost ConverterPower Factor CorrectionDigital Control Simulation
相關次數:
  • 被引用被引用:5
  • 點閱點閱:173
  • 評分評分:
  • 下載下載:21
  • 收藏至我的研究室書目清單書目收藏:3
本論文針對高功因昇壓型轉換器不同控制法進行模擬與分析。首先建立一操作於定頻率、不連續導通(DCM)模式之新型單位功因轉換器模型,並從理論上分析其運轉特性。接著以一實際應用為目標,計算主電路元件參數,再利用Matlab建立全系統之等效電路,進行不同運轉狀況之模擬。最後與傳統式控制(連續及臨界導通模式)之電路模擬結果比較,一方面驗證模型的可行性,另一方面突顯新型控制方法之特點,作為日後進一步發展及應用的具體參考。
In this thesis, High-Power-Factor (HPF) boost converters using different control methods are simulated and analyzed. Firstly, a newly developed unit-power-factor correction circuit model is built, the circuit is operated in constant-frequency and Discontinuous Conduction Mode (DCM). The parameters of the converter are calculated, and the converter system including power circuit and controller is built by Matlab. Besides, two different converters with conventional control methods based on Continuous Conduction Mode (CCM) and Boundary Conduction Mode (BCM) are also simulated. Finally, different operation conditions are simulated for all converters, and their performances are compared with each other. The character of the converter using new control method are highlighted from the comparisons.
中文摘要
英文摘要
誌謝
目錄
表目錄
圖目
第一章 緒論
1-1 研究背景與動機
1-2 研究方法與貢獻
1-3 論文內容大綱
第二章 昇壓式轉換器工作原理
2-1 前言
2-2 昇壓式轉換器架構與操作模式
2-3 功率因數修正技術
2-3-1 平均電流控制法
2-3-2 峰值電流控制法
2-3-3 電壓隨耦控制法
第三章 新型控制法理論分析與模型建立
3-1 新型控制法原理
3-2 昇壓式轉換器參數設計與模擬
3-3 功因修正控制系統模型建構
第四章 傳統式控制與新型控制法之模擬比較
4-1 傳統類比式控制功因修正電路模擬
4-1-1連續模式功因修正電路
4-1-2不連續模式功因修正電路
4-2 新型控制法模擬
4-3 綜合性能比較
第五章 結論與未來展望
5-1 結論
5-2 未來展望
參考文獻
[1]D. C. Lu, K. W. Cheng and S. Lee, "A Single-Switch Power-Factor-Corrected Converter with Reduced Repeated Power Processing," Proceedings of International Conference on Power Electronics and Drive Systems, Vol.1, Oct. 2001, pp. 26-32.
[2]S. Luo, W. Qiu, W. Wu and I. Batarseh, "Flyboost Power Factor Correction Cell and a New Family of Single-Stage AC/DC Converters," IEEE Transactions on Power Electronics, Vol.20, No.1, Jan. 2005, pp. 25-34.
[3]Y. Zheng and G. Moschopoulos, "Design Considerations for a New AC-DC Single-Stage Flyback Converter," Proceedings of Applied Power Electronics Conference and Exposition, Vol.1, Mar. 2006, pp. 400-406.
[4]O. Garcia, J. A. Cobos, P. Alou, R. Prieto and J. Uceda, "Single Phase Power Factor Correction : A Survey," IEEE Transactions on Power Electronics, Vol.18, No.3, May 2003, pp. 749-755.
[5]K. Rustom, W. Wu, W. Qiu and I. Batarseh, "Asymmetric Half Bridge Soft -Switching PFC Converter with Direct Energy Transfer," Proceedings of Power Electronics Specialists Conference, Vol.2, June 2002, pp. 676-681.
[6]洪志泰,以數位信號處理器為控制單元之升壓型高功因電力轉換器之研製,國立成功大學碩士論文,2007年7月。
[7]J. L. Lin, J. C. Hsieh and T. H. Tsai, “Dynamics Analysis of a Single-Stage Isolated High Power Factor Converter with a Magnetic Switch,” IEE Proceedings Electric Power Applications, Vol.52, No.1.3, May 2005, pp.643-652.
[8]S. Park and T. M. Jahns, “A self-boost charge pump topology for a gate drive high-side power supply,” IEEE Transactions on Power Electronics, Vol. 20, Mar. 2005, pp. 300–307.
[9]W.F. Zhang, G. Feng, Y. F. Liu and B. Wu, “Analysis and implementation of a new PFC digital control method,” Proceedings of Power Electronics Specialist Conference, Vol.1, June 2003, pp. 335-340.
[10]H. W. Seong, K. B. Park, G. W. Moon and M. J. Youn, “Novel dual inductor-fed DC-DC converter integrated with parallel boost converter ,” IEEE of Power Electronics Specialists Conference, June 2008, pp. 2125-2131.

[11]L. Huber, J. Yungtaek and M. M. Jovanovic, “Performance Evaluation of Bridgeless PFC Boost Rectifiers,” IEEE Transactions on Power Electronics, Vol.23, No.3, May 2008, pp. 1381-1390.
[12]梁適安譯,高頻交換式電源供應器原理與設計,全華科技圖書股份有限公司,2002年2月。
[13]Texas Instruments, Datasheet of UC3854, 1999.
[14]ON Semiconductor, Datasheet of MC33262, 2005.
[15]S. Buso, P. Mattavelli, L. Rossetto and G. Spiazzi, “Simple digital control for improving dynamic performance of power factor preregulators,” IEEE Transactions on Power Electronics, Vol.13, No. 5, Sep. 1998, pp. 814–823.
[16]J. Zhou, Z. Lu, Z. Lin, Y. Ren, Z. Qian, and Y. Wang, “A novel DSP controlled 2 kW PFC converter with a simple sampling algorithm,” IEEE Applied Power Electronics Conference and Exposition, Vol. 3, Fed.2000, pp. 434–437.
[17]S. Bibian and H. Jin, “Digital control with improved performance for boost power factor correction circuits,” IEEE Applied Power Electronics Conference and Exposition, Vol. 1, March 2001, pp. 137–143.
[18]M. Fu and Q. Chen, “A DSP based controller for power factor correction (PFC) in a rectifier circuit,” IEEE Applied Power Electronics Conference and Exposition, Vol. 1, March 2001, pp. 144–149.
[19]X. Huang, T. Nergaard, J. S. Lai, X. Xu and L. Zhu, “A DSP based controller for high-power interleaved boost converters,” IEEE Applied Power Electronics Conference and Exposition, Vol. 1, Feb. 2003, pp. 327–333.
[20]S. Kim and P. N. Enjeti, “Control of multiple single phase PFC modules with a single lowcost DSP,” IEEE Applied Power Electronics Conference and Exposition, Vol. 1, Feb. 2003, pp. 375–381.
[21]J. Bastos, L. Farronato, H.P. Figueroa, D. Franzoni, S. Lentijo, A. Monti, A. Smith and X. Wu, “ FPGA-based control of power converter: comparing alternative solutions,” IEEE Applied Power Electronics Conference and Exposition, Vol. 3, Mar. 2005, pp. 1983-1989.
[22]Z. Z. Ye and M.M. Jovanovic, “Implementation and Performance Evaluation of DSP-Based Control for Constant-Frequency Discontinuous -Conduction-Mode Boost PFC Front End, ” IEEE Transactions on Industrial Electronics, Vol. 52, NO.1, Feb. 2005, pp. 98-107.
[23]龔應石、陳建武、徐永松,TMS320F/C24x DSP控制器原理與應用,滄海書局,2003年8月。
[24]N. B. H. Youssef, K. Al-Haddad, “Application of the New Quasi-Linear Control Theory to the AC Current Shaping and DC Voltage Regulation of a Three-Phase boost-type AC/DC Vienna Converter Under Very Severe Operating Conditions,” IEEE 2007 International Conference on EUROCON, Sept. 2007, pp.1336-1343.
[25]J. L. Lin, M. Z. Chang and S. P. Yang, “Synthesis and analysis for a novel single-stage isolated high power factor correction converter,” IEEE Transactions on Circuits and Systems, Vol. 52, No.9, Sept. 2005, pp. 1928-1939.

[26]J. L. Lin, J. C. Hsieh, I and C. Yeh, “A novel ZCZVT soft-switching single-stage high power factor correction converter,” IEEE Asia-Pacific Conference on Circuits and Systems, Vol. 2, Dec. 2004, pp. 657-660.
[27]劉文平,以DSP為基礎研製高功因高效率之並聯型交直流轉換器,國立高雄應用科技大學碩士論文,2007年7月。
[28]J. Lazar and S.C´ uk, “Feedback loop analysis for AC/DC rectifiers operating in discontinuous conduction mode,” IEEE Applied Power Electronics Conference and Exposition, 1996, pp. 797–806.
[29]鄭培璿,電力電子分析與模擬,全華科技圖書股份有限公司,2004年9月。
[30]V. F. Pies and J. F. Silva, “Teaching nonlinear modeling, simulation, and control of electronic power converter using MATLAB/SIMULINK,” IEEE Transactions on Education, Vol.45 Aug.2002, pp. 253-261.
[31]J. H. Su, J. J. Chen and D. S. Wu, “Learning feedback controller design of switching converters via MATLAB/SIMULINK,” IEEE Transactions on Education, Nov. 2002, pp. 307-315.
[32]李宜達,控制系統設計與模擬,全華科技圖書股份有限公司,2006年9月。
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊