
[1] Larsen, E. V. and Swann, D. A., “Applying power system stabilizers part I: General concepts,” IEEE Trans. Power Apparatus and System, vol. PAS100, No. 6, pp. 30173024, June 1981. [2] Kao, W., “Effect of Load Models on Unstable LowFrequency Oscillation Damping in Taipower System Experience with and Without Power System Stabilizers,” IEEE Power Engineering Review. pp. 72, June 2001. [3] Hamouda, R. M., Iravani, M. R., and Hackam, R., “Coordinated static VAR and power system stabilizers for damping power system oscillations,” IEEE Trans. Power Systems. vol. 2, No. 4, pp. 10591067, November 1987. [4] Bera, P., Das, D and Basu, T. K., “Design of PID power system stabilizer for multimachine system,” IEEE India annual conference Indicon 2004, pp. 446450, 2004. [5] Vitthal, B., and Bandyopadhyay, B., “Relay free sliding mode control technique based power system stabilizer for single machine infinite bus system,” IEEE Proceeding of 2007 American Control Conference, pp. 59225927, July 2007. [6] Joe, H. C., George, E. B., and Alexander, M., “Power system stabilizer as undergraduate control design projects,” IEEE Tran. Power Systems, vol. 19, No. 1, pp. 144151, February 2004. [7] Aldeen, M and Crusca, F., “Multimachine power system stabiliser design based on new LQR approach,” IEE Proceeding Gener. Trasm. Distrib., vol. 142, No. 5, pp. 494502, September 1995. [8] DeMello, F. P. and Laskowski, T. F., “Concepts of power system dynamic stability,” IEEE Trans. Power Apparatus and System, vol. PAS94, pp. 827833, May 1975. [9] AbdelMagid, Y. L., Abido, M. A., and Mantawy, A. H., “Robust tuning of power system stabilizers in multimachine power systems,” IEEE Trans. Power Systems, vol. 15, No. 2, pp. 735740, May 2000. [10] Chaturvedi, D. K., Malik, O. P., and Kalra, P. K., “Experimental studies with a generalized neuronbased power system stabilizer,” IEEE Trans. Power Systems, vol. 19, No. 3, pp. 14451453, August 2004 [11] Hoang, P. and Tomsovic, K., “Design and analysis of an adaptive fuzzy power system stabilizers,” IEEE Trans. Energy Conversion, vol. 11, pp. 455481, June 1996. [12] Chan, W. C. and Hsu, Y. Y., “An optimal variable structure stabilizer for power system stabilization,” IEEE Trans. Power Apparatus and Systems, vol. PAS102, No. 6, pp. 17381746, June 1983. [13] Fleming, R. J., Mohan, M. A., and Paratisam, K., “Selection of parameters in mutimachine power systems,” IEEE Trans. Apparatus and Systems, vol. PAS100, No. 5, pp. 23292333, May 1981. [14] Yu, Y. N., and Siggers, C., “Stabilization and optimal control signals for a power system,” IEEE Trans. Power Apparatus and Systems, vol. PAS90, pp.14691481, July/August 1971. [15] Yu, Y. N., and Moussa, H. A. M., “Optimal stabilization of a multimachine system,” IEEE Trans. Power Apparatus and Systems, vol. PAS91, pp. 11741182. May/June 1972. [16] Chen, T. C., and ChangChien, L. R., “Optimal pole assignment to stabilize a power system, Journal of Control Systems and Technology,” vol. 4, No. 2, pp. 119126, 1996. [17] Nomikos, B. M. and Vournas, C. D., “Investigation of induction machine contribution to power system oscillations,” IEEE Trans. Power Systems, vol. 20, pp. 916925, May 2005. [18] Hosseinzadeh, N. and Kalam, A., A “direct adaptive fuzzy power system stabilizer,” IEEE Trans. Energy Conversion, vol. 14, pp. 15641571, Dec.1999. [19] Wenxin, L., Venaygamoorthy, G. K. and Wunsch, D. C., “Adaptive neural network based power system stabilizer design,” IEEE Trans. Neural Networks, vol. 4, pp. 29702975, July 2003. [20] Giles, G. L., Kuhn, G. M. and Williams, R. J., “Dynamic recurrent neural networks: theory and applications,” IEEE Trans. Neural Networks, vol. 5, No. 2, pp. 153155, Mar. 1994. [21] You, R., Eghbali, H. J. and Nehrir, M. H., “An online adaptive neurofuzzy power system stabilizer for multimachine systems,” IEEE Trans. Power Systems, vol. 18, No.1, pp.128135, Feb. 2003. [22] Gupta, R., Bandyopadhyay, B. and Kulkarni, A. M., “Design of power system stabilizer for singlemachine system using robust periodic output feedback controller,” IEE Proc. Generation, Transmission and Distribution, vol. 150, issue 2, pp. 211216, Mar. 2003. [23] Xu, D. and He, R. M., “ANN based multiple power system stabilizers adaptive and coordinates control,” PowerCon 2002. International Conference Proceeding, vol. 1, pp. 361364, Oct. 2002. [24] Ramakrishna, G. and Malik, O. P., “Radial basis function identifier and poleshifting controller for power system stabilizer application,” IEEE Trans. Energy Conversion, vol. 19, No. 4, pp. 663670, Dec. 2004. [25] Salem, M. M., “Studies on a multimachine power system with a neural network based excitation controller,” Power Engineering Society Meeting, 2000 IEEE, vol. 1, pp. 105110, July 2000, [26] Chen, C. J. and Chen, T. C., “Design of power system stabilizer using a new recurrent neural network,” IEEE proceedings, First International Conference on Innovative Computing, Information and Control, vol. I, pp. 39~42, Aug. 2006. [27] .Chen, G.. P. and Malik, O. P., “An adaptive power system stabilizer based on the selfoptimizing pole shifting control strategy,” IEEE Trans. Energy Conversion, vol. 8, pp. 639645, Dec. 1993. [28] Chaturvedi, D. K., Malik, O. P. and Kalra, P. K., “Performance of a generalized neuronbased PSS in a multimachine power system,” IEEE Trans. Energy Conversion, vol. 19, pp.625632, Sept. 2004. [29] Lee, K. C., and Hydro, B. C., “Analysis of power system stabilizers application for controlling poorly damped oscillations in the alcan/B. C. hydro power systems,” IEEE Trans. Power Systems, vol. 8, No. 1, pp. 255263, February 1993. [30] Zhang, Y., Chen, G. P., Malik, O. P., and Hope, G. S., “An artificial neural network based adaptive power system stabilizer,” IEEE Trans. Energy Conversion, vol. 8, No. 1, pp. 7177, March 1993. [31] Boukarim, G. E., Wang, S. Chow, J. H. Taranto, G. N., and Martins, N., “A comparison of classical, robust, and decentralized control designs for multiple power system stabilizers,” IEEE Trans. Power Systems, vol. 15, No. 4, pp. 12871292, November 2000. [32] Hsu, Y. Y., and Hsu, C. Y., “Design of a proportionalintegral power system stabilizer,” IEEE Trans. Power Systems, vol. PWRS1, No. 2, pp. 4652, May 1986. [33] Hosaeinzadeh, N., and Kalam, A., “A direct adaptive fuzzy power system stabilizer,” IEEE Trans. Energy Conversion, vol. 14, No. 4, pp. 15641571, December 1999. [34] Hosseinzadeh, N., and Kalam, A., “A rulebased fuzzy power system stabilizer tuned by a neural network,” IEEE Trans. Energy Conversion, vol. 14, No. 3, pp. 773779, September 1999. [35] Liu, W., Venayagamoorthy, G. K., and Wunsch, D. C., “A heuristicdynamicprogrammingbased power system stabilizer for a turbogenerator in a singlemachine power system,” IEEE Trans. Industry Applications, vol. 41, No. 5, pp. 13771385, September 2005. [36] Kamwa, I., Grondin, R., and Trudel, G., “IEEE PSS2B versus PSS4B: The limits of performance of modern power system stabilizers,” IEEE Trans. Power Systems, vol. 20, No. 2, pp. 903915, May 2005. [37] Abido, M. A., and AbdelMagid, Y. L., “Hybridizing rulebased power system stabilizer with genetic algorithm,” IEEE Trans. Power Systems, vol. 14, No. 2, pp. 600607, May 1999. [38] Chaturvedi, D. K., and Malik, O. P., “Neurofuzzy Power System Stabilizer,” IEEE Trans. Energy Conversion, vol. 23, No. 3, pp. 887894, September 2008. [39] Liu, S., Messina, A. R., and Vittal, V., “A normal form analysis approach to siting power system stabilizer (PSSs) and assessing power system nonlinear behavior,” IEEE Trans. Power Systems, vol. 21, No. 4, pp. 17551762, November 2006. [40] Yue, M., and Schlueter, R. A., “μsynthesis power system stabilizer design using a bifurcation subsystem based methodology,” IEEE Trans. Power Systems, vol. 18, No. 4, pp. 14971506, November 2003. [41] Rogers, G. J., “The application of power system stabilizer to a muligenerator plant,” IEEE Trans. Power Systems, vol. 15, No. 1, pp. 350355, February 2000. [42] Nambu, M., and Ohsawa, Y., “Development of an advanced power system stabilizer using a strict linearization approach,” IEEE Trans. Power Systems, vol. 11, No. 2, pp. 813818, May 1996. [43] Chen, C. L., and Hsu, Y. Y., “Coordinated synthesis of multimachine power system stabilizer using an efficient decentralized modal control (DMC) algorithm,” IEEE Trans. Power Systems, vol. PWRS2, No. 3, pp. 543550, August 1987. [44] AbdelMagid, Y. L., and Abido, M. A., “Optimal multiobjective design of robust power system stabilizers using genetic algorithm,” IEEE Trans. Power Systems, vol. 18, No. 3, pp. 11251132, August 2003. [45] Ao, Z., Sidhu, T. S., and Fleming, R. J., “Stability investigation of a longitudinal power system and its stabilization by a coordinated application of power system stabilizer,” IEEE Trans. Energy Conversion, vol. 9, No. 3, pp. 466474, September 1994. [46] Rogers, G. J., “The application of power system stabilizers to a multigenerator plant,” IEEE Trans. Power Systems, vol. 15, No. 1, pp. 350355, February 2000. [47] Huda, R. M., Iravani, M. R., and Hackarn, R., “Coordinated static VAR compensators and power system stabilizer for damping power system oscillations,” IEEE Trans. Power Systems, vol. PWRS2, No. 4, pp. 10591067, November 1987. [48] Hughes, F. M., AnayaLara, O., and Jenkins, N., “A power system stabilizer for DFIGbased wind generation,” IEEE Trans. Power Systems, vol. 21, No. 2, pp. 763772, May 2006. [49] Lee, K. C., “Analysis of power system stabilizers application for controlling poorly damped oscillations in the ALCAN/B. C. hydro power systems,” IEEE Trans. Power Systems, vol. 8, No. 1, pp. 255263, February 1993. [50] Hagengren, B., and Sandberg, U., “A control center laboratory realistic power system model,” IEEE Trans. Power System, vol. PWRS1, No. 3, pp. 292297, August 1986. [51] Mingguo, H., Liu, C. C. and Madeleine, G. “Complete controllability of an Nbus dynamic power system model,” IEEE Trans. Circuits and System—I: Fundamental Theory and Applications, vol. 46, No. 6, pp. 700713, June 1999 [52] Zhihua, Q., Dorsey, J. B., and James, D. M. “Application of robust to sustained oscillations in power system,” IEEE Trans. Circuits and System—I: Fundamental Theory and Applications, vol. 39, No. 6, pp. 470476, June 1992. [53] Stavrakakis, G. S. and Kariniotakis, G. N., “ A general simulation algorithm for the accurate assessment of isolate dieselwind turbines systems interaction, part I: a general multimachine power system model,” IEEE Trans. Energy Conversion, vol. 10, No. 3, pp. 577583, September 1995. [54] Mingguo, H., and Liu, C. C., ”Complete controllability of a simple dynamic power system model,” IEEE Trans. Circuits and System—I: Fundamental Theory and Applications, vol. 42, No. 8, pp. 491494, June 1995. [55] Chen, S., and Malik, O. P.,”Power system stabilizer design using μ synthesis,” IEEE Trans. Energy Conversion, vol. 10, No. 1, pp. 175181, March 1995. [56] H. Okamoto, A. Kurita, J.J. SanchezGasca, K. Clark, N.W. Miller, and J. H. Chow., “Identification of low order linear power system models from EMTP simulations using the steiglitzMcbride algorithm,” IEEE Trans. Power Systems, vol. 13, No. 2, pp. 422427, May 1998. [57] George Opoku, “Optimal power system VAR planning,” IEEE Trans. Power Systems, vol. 5, No. 1, pp. 5360, February 1990. [58] Noroosian, M. and Andersson, G., “Damping of power system oscillations by controllable components,” IEEE Trans. Power Delivery, vol. 9, No. 4, pp. 20462054, October 1994. [59] Carlos, T. C. Max, R. N., Walter, J., and Jose , A. L. B., “Using local models identification to power system stabilizers design at tucurui’s hydroelectric power plant,” IEEE/PES transmission & Distribution conference & Exposition, pp. 16, 2004. [60] Malik, O. P., Stroev, V. A., Shtrobel, V. A., Hancock, G. C. and Beim, R. S., “Experimental studies with power system stabilizer on a physical model of a multimachine power system,” IEEE Trans. Power Systems, vol. 11, No. 2, pp. 807812, May 1996. [61] He, J. and Malik, O. P., “An adaptive power system stabilizer based on recurrent neural networks,” IEEE Trans. Energy Conversion, vol. 12, No. 4, pp. 413419, Dec. 1997. [62] Shamsollahi, P. and Malik, O. P., “Application of neural adaptive power system stabilizer in a multimachine power system,” IEEE Trans. on Energy Conversion, vol. 14, No. 3, pp. 731736, Sept. 1999. [63] Miguel, R. G., and Malik, O. P., “Power system stabilizer design using an online adaptive neurofuzzy controller with adaptive input link weights,” IEEE Trans. Energy Conversion, vol. 23, No. 3, pp. 914922, September 2008. [64] Lin, C. H., “Adaptive recurrent fuzzy neural network control for synchronous reluctance motor servo drive,” IEE Proc. Power Applications, vol. 151, No. 6, pp. 711724, November 2004. [65] You, R., Eghbali, H. J., and Nehrir, M. H., “An online adaptive neurofuzzy power system stabilizer for multimachine systems,” IEEE Trans. Power Systems, vol. 18, No. 1, pp. 128135, February 2003. [66] Hasanovic, A., and Feliachi, A., “Practical robust PSS design through identification of loworder transfer functions,” IEEE Trans. Power Systems, vol. 19, No. 3, pp. 14921500, August 2004. [67] Barton, Z., “Robust control in a multimachine power system using adaptive neurofuzzy stabilizers,” IEE Proc. Generating, Transmission, and Distributing, vol. 151, No. 2, pp. 261267, March 2004. [68] Lukasz A. Machowski and Tshilidzi Marwala., “Using an object oriented calculation process framework and neural networks for classification of image shapes,” International Journal of Innovative Computing, Information and Control ( IJICIC ), vol. 1, No. 4. pp. 609623, Dec. 2005. [69] Toshihiko Yasuda, Kaazushi Nakamura, Akihro Kawahara and Katsuyuki Tanaka., “Neural network with variable type connection weights for autonomous obstacle avoidance on a prototype of sixwheel type intelligent wheelchair, “ International Journal of Innovative Computing, Information and Control ( IJICIC ), vol. 2, No. 5. pp. 11651177, Oct. 2006.
