跳到主要內容

臺灣博碩士論文加值系統

(44.220.44.148) 您好!臺灣時間:2024/06/21 15:47
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:林立元
研究生(外文):Lin, Li Yuan
論文名稱:穿戴式撓性感測器之研發
論文名稱(外文):Development of the Wearable Flexible Sensor
指導教授:方維倫
指導教授(外文):Fang, Weileun
學位類別:碩士
校院名稱:國立清華大學
系所名稱:動力機械工程學系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2009
畢業學年度:97
語文別:中文
論文頁數:77
中文關鍵詞:穿戴式智慧型輔具撓性壓力感測器微機電系統
外文關鍵詞:Wearable sensorFlexible pressure sensorMEMS
相關次數:
  • 被引用被引用:3
  • 點閱點閱:409
  • 評分評分:
  • 下載下載:101
  • 收藏至我的研究室書目清單書目收藏:0
本研究利用微機電系統之技術,將壓力計結合在撓性基板上,完成穿戴式撓性感測器之概念,改善以往穿戴式輔具只是單純扮演輔助的角色,其並無法直接由自身求得足底壓力分佈,必須藉由外部的感測器,例如壓力板,藉以得到足部壓力、地面反射力以及足部重心的位置之方法,利用此種方式可直接量測患者的足部壓力,並對於足部穿戴式感測器與電腦端之連結上做一改善,避免因為穿戴式感測器之訊號影響整個系統,使之判斷造成誤差。
In the past, the distribution of the sole pressure cannot be measured by the wearable appliance in gait analysis. The sole pressure, the reaction force, and the center of gravity of body even the physical movement can only be got by an outside sensor, for instance, the pressure board. If we wanted to get the physical movement of body, we had to use the camera to capture the image and analysis. This study will use the concept of wearable sensor that using flexible sensor using Micro Electro-Mechanical System (MEMS) to measure the distribution of the sole pressure and motion of body. Then we improve the problems of connection with the control computer. The monitoring computer could avoid receiving the error signal.
摘要 I
Abstract II
致謝 III
目錄 V
圖目錄 VIII
表目錄 XIII
第一章 序論 1
1-1 前言 1
1-2 文獻回顧 4
1-2.1 撓性感測器 4
1-2.2 人工輔具 7
1-3 研究目標 9
第二章 設計與分析 17
2-1 壓阻效應 17
2-2 惠斯同電橋 20
2-3 元件設計與模擬 21
2-4 穿戴式感測器之設計 23
第三章 製程實驗 28
3-1 製程步驟 28
3-1.1 壓力感測晶片 28
3-1.2 晶片之封裝 29
3-1.3 穿戴感測器 30
3-2 製程結果及探討 31
第四章 量測結果 42
4-1 壓力感測晶片 42
4-2 穿戴式感測器 42
第五章 結論及未來工作 53
5-1 結論 53
5-2 未來工作 54
參考文獻 55
附錄A加速度計 63
A-1 簡介 63
A-2 設計分析 65
A-3 結果量測 67
[1] S.J. Morris, J.A. Paradiso, “Shoe-integrated sensor system for wireless gait analysis and real-time feedback,” EMBS/BMES Conference, 3, pp. 2468-2469, 2002.
[2] E.F. Desseree-Calais, L.R. Legrand, “First results of a complete marker-free methodology for human gait analysis,” Engineering in Medicine and Biology 27th Annual Conference, 2005, pp. 7455-7458.
[3] 李豪政, “活塞式鞋墊對減低足部壓力之效益研究,” 陽明大學醫學工程研究所碩士論文, 2000.
[4] 劉紹龍, “退化性膝關節炎病人跨越障礙物時之步態分析,” 中國醫藥學院醫學研究所碩士論文, 2003.
[5] 黃國峰, “膝下截肢患者穿戴新型義肢在平地-斜坡和階梯之步態和能量消耗分析,” 成功大學醫學工程研究所博士論文, 2002.
[6] K.E. Petersen, “Silicon as a mechanical material,” Electron Devices, IEEE Transactions, 70, pp. 420-457, 1982.
[7] R.T. Howe, R.S. Muller, K.J. Gabriel, and W.S.N. Trimmer, IEEE spectrum, 27, pp. 29-35, 1990.
[8] 丁志明等, “微機電系統技術與應用,” 國科會精密儀器發展中心, 2003.
[9] B. V. Jayawant, “Tactile sensing in robotics,” J. Phys. E: Sci. Instrum. 22, pp. 684-692, 1989.
[10] K. Noda, K. Hoshino, K. Matsumoto, and I. Shimoyama, “300nm-thick cantilever in PDMS for tactile sensing,” MEMS'05, 2005, pp. 283-286.
[11] K. Noda, and I. Shimoyama, “A Shear Stress Sensing for Robot Hands-Orthogonal arrayed Piezoresistive Cantilevers standing in Elastic Material-,” 14th Symposium on Haptic Interfaces for Visual Environment and Teleoperator Systems, Alexandria USA 2006, pp. 63-66.
[12] M. Leineweber , G. Pelz, M. Schmidt, H. Kappert, and G. Zimmer, “New tactile sensor chip with silicone rubber cover,” Sensors and Actuators, 84, pp. 236-245, 2000.
[13] H. K. Lee, S. I. Chang and E. Yoon, “Polymer tactile sensing array with a unit cell of multiple capacitors for three-axis contact force image construction,” MEMS ’07, Kobe Japan, 2006, pp. 606-609.
[14] E. S. Hwang, J. H. Seo and Y. J. Kim, “A Polymer-based flexible tactile sensor for both normal and shear load detection and its application for robotics,” J. Microelectromechanical Systems, 16, NO. 3, pp. 556-563, 2007.
[15] J. Engel, J. Chen, Z. Fan, and C. Liu, “Polymer micromachined multimodal tactile sensors,” Sens. Actuators A, Phys., 117, pp. 50-61, 2005.
[16] 胡志帆, “新型撓性壓力及觸覺感測陣列之研究,” 清華大學動力機械工程研究所碩士論文, 2007.
[17] R. Roduit, P.-A. Besse, and J.-P. Micallef, “Flexible angular sensor,” IEEE Transactions on instrument and measurement, 47, No. 4, pp. 1020-1022, 1998.
[18] D. J. Lichtenwalner, A. E. Hydrick, and A. I. Kingon, “Flexible thin film temperature and strain sensor array utilizing a novel sensing concept,” Sensors and Actuators A, 135, pp. 593–597, 2007.
[19] P.-G. Su, and C.-S. Wang, “Novel flexible resistive-type humidity sensor,” Sensors and Actuators B, 123, pp. 1071–1076, 2007.
[20] A. B. Zoss, H. Kazerooni, and A. Chu, “Biomechanical design of the Berkeley Lower Extremity Exoskeleton (BLEEX),” IEEE/ASME Transactions on Mechatronics, 11, NO. 2, pp. 128-138, APRIL 2006
[21] http://world.honda.com
[22] http://www.cyberdyne.jp
[23] C. S. Smith, “Piezoresistance effect in germanium and silicon,” Phys. Rev, 94, pp. 42-49, 1954.
[24] A. D. Boardman, “Many-Valley Dipole Scattering of Electrons in Germanium and Silicon,” Phys. Rev, 147, pp. 532-540, 1966.
[25] A. C. Ugural, “Stresses in plates and shells,” 2nd ed., McGraw-Hill, 1981.
[26] M. Shikida, T. Shimizu, K. Sato and K. Itoigawa, “Active tactile sensor for detecting contact force and hardness of an object,” Sensor and Actuator A, 103, pp. 213-218, 2003.
[27] A. Tibrewala, A. Phataralaoha and S. B¨uttgenbach, “Analysis of full and cross-shaped boss membranes with piezoresistors in transversal strain configuration,” J. Micromech. Microeng., 18, 2008, 055001.
[28] J.-J. Ho, “The design and fabrication of a micro-thermal/pressure-sensor for medical electro-skin application,” Solid-State Electronics, 46, pp. 1205-1209, 2002.
[29] F. Schneider, T. Fellner, J. Wilde and U. Wallrabe, “Mechanical properties of silicones for MEMS,” J. Micromech. Microeng., 18, 2008, 065008.
[30] J. C. L¨ottersy, W. Olthuis, P. H. Veltink and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng., 7, pp. 145-147, 1997.
[31] G. A. Holzapfel, “On large strain viscoelasticity: continuum formulation and finite element applications to elastomeric structures,” International Journal For Numerical Methods In Engineering, 39, pp. 3903-3926, 1996.
[32] C.-M. Sun, C.-W. Wang, M.-H. Tsai, H.-S. Hsieh, and W. Fang, “Monolithic integration of capacitive sensors using a double-side CMOS MEMS post process,” J. Micromech. Microeng., 19, 015023, 2009.
[33] C.-C. Wen and W. Fang, “Tuning the sensing range and sensitivity of three axes tactile sensors using the polymer composite membrane,” Sensors and Actuators A, 145-146, pp. 14-22, 2008.
[34] B. Bae, B. R. Flachsbart, K. Park and M. A. Shannon, “Design optimization of a piezoresistive pressure sensor considering the output signal-to-noise ratio,” J. Micromech. Microeng., 14, 2004, pp. 1597-1607.
[35] http://www.analog.com
[36] G. Zhang, H. Xie, L. E. de Rosset and G. K. Fedder, “A lateral capacitive COMS accelerometer with structural curl compensation,” MEMS ’99, Orlando USA, 1998, pp. 606-611.
[37] Hasnain Lakdawala and G.K. Fedder, “Temperature stabilization of CMOS capacitive accelerometer”, J. Micromeh. Microeng., 14, pp. 559-566, 2004.
[38] 蔡明翰, “新型CMOS MEMS全差動Z軸加速度計,” 清華大學微機電系統工程研究所碩士論文, 2007.
[39] A. Partridge, J. K. Reynolds, B. W. Chui, E. M. Chow, A. M. Fitzgerald, L. Zhang, N. I. and T. W. Kenny, “A high-performance planar piezoresistive accelerometer,” J. Microelectromechanical Systems, 9, NO. 1, pp. 58-66, MARCH, 2000.
[40] R. Amarasinghe, D. V. Dao, T. Toriyama and S. Sugiyama, “Design and fabrication of a miniaturized six-degree-of-freedom piezoresistive accelerometer,” J. Micromech. Microeng., 15, pp. 1745-1753, 2005.
[41] R. Amarasinghe, D. V. Dao, T. Toriyama and S. Sugiyama, “Simulation, fabrication and characterization of a three-axis piezoresistive accelerometer,” Smart Materials and Structures, 15, pp. 1691-1699, 2006.
[42] B. Folkmer, P. Steiner and W. Lang, “A pressure sensor based on a nitride membrane using single crystalline piezoresistors,” Transducers '95, Stockholm Sweden, 1995, pp. 574-577.
[43] J.-S. Park and Y. B. Gianchandani, “A low cost batch-sealed capacitive pressure sensor,” MEMS ’99, Orlando USA, 1999, pp. 82-87.
[44] S. Sugiyama, K. Shimoka and O. Tabata, “Surface micromachined micro-diaphragm pressure sensors,” Transducers '91, San Francisco USA, 1991, pp. 188-191.
[45] C. Ravaiu, F. Ravariu, D. Dobrescu, L. Dobrescu, C.Codreanu, and M. Avarm, “A designing roule for a pressure sensor with pzt layer,” Semiconductors, Sinaia Romania, 2001, pp. 379-382.
[46] C. Pramanik, H. Saha and U. Gangopadhyay, “ Design optimization of a high performance silicon MEMS piezoresistive pressure sensor for biomedical applications,” J. Micromech. Microeng., 16, pp. 2060-2066, 2006.
[47] http://www.nintendo.com
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top