跳到主要內容

臺灣博碩士論文加值系統

(44.210.83.132) 您好!臺灣時間:2024/05/22 22:46
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:李献助
研究生(外文):Hsien- Chu Lee
論文名稱:微型寒水式節能熱交換機之研究
論文名稱(外文):A Study of Heating Exchanger Using Mini Cool-Water Type for Saving Energy
指導教授:陳政裕陳政裕引用關係
學位類別:碩士
校院名稱:國立虎尾科技大學
系所名稱:電機工程研究所在職專班
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2011
畢業學年度:99
語文別:中文
論文頁數:98
中文關鍵詞:微型寒水式冷熱交換機散熱水冷式散熱系統節能
外文關鍵詞:mini cooling-water typeheating exchangerdissipation
相關次數:
  • 被引用被引用:0
  • 點閱點閱:88
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本論文是研究對於溫度與耗能間的關係,作者提出一新型『微型寒水式節能熱交換機』,以完整的實機按裝在Acer桌上型電腦實驗分析,並模擬在環境溫度26℃~28℃的條件下,電腦中央處理器100%滿載運轉時溫度的變化,對於散熱耗能之改變情形,並與水冷式散熱系統進行比較。
近年來對於電子散熱元件之研究結果發現,水冷式散熱確實比傳統風扇氣冷式具有較佳的散熱效果,經本論文研究實驗結果證明,在同樣的模擬溫度變化下,能解決CPU散熱問題的效益順序為,微型寒水式熱交換機更優於水冷式,微型寒水式節能熱交換機可以解決局部性發熱問題,有效率的能源使用。『微型寒水式熱交換機』經實驗證明是二段式散熱系統,可隨著溫度的上升調節散熱冷卻系統所需的溫度,以達到穩定恆溫的效果,確實保護電腦硬碟及電子元件壽命,增加使用的靈活性並達到能源有效使用。本論文主要貢獻有:體積小可裝置於電腦主機內,突破目前市售外掛在機殼外部的水冷式散熱器、並達到方便安裝不佔空間及攜帶方便之使用目的、電源DC/AC都可使用,可針對局部散熱達到環保節能的使命、不僅只是使用在電腦散熱系統上,也可是台微型冷氣機或冰箱;可裝置於嬰兒手推車、寵物屋、紅酒儲藏櫃等用途;更期望對於溫度發熱與耗能間的關係有所助益,因為合理化的能源使用可以確實做到節能減碳。
The thesis studies on relationship between temperature and energy consumed. The author addresses a new-type heating exchange using micro cooling-water. The equipment has been installed in Acer personal desk-computer and through experimental analysis to simulate under the condition for 26~28 degree Celsius, to observe the change of temperature while CPU 100 % full load performance and the circumstance changed between heat dissipation and energy consumed. Moreover, the author takes some comparison with water-cooled system. In accordance with results of experiment, the benefit of resolving heat dissipation problems of CUP, micro cooling-water is prior to water-cooled and air-cooled cooling system. Heating exchanger using micro cooling-water type does solve partial heat dissipation problems, and make use of energy more effectively. Heating exchanger using micro cooling water type will adjust temperature with heat dissipation system in order to keep temperature stably. The capability prolong life time of electronic component is positively and improve its flexibility on use, furthermore, to achieve use of energy effectively. The contributions of this thesis as following: small volume could be installed in the host of computer instead of hang on shell. Easier to carry-on and available both for power supply DC/AC. This heating exchange achieves energy conservation purpose via partial heat dissipation function and this will resolve problems of heat dissipation and the consuming energy. The rationalization energy use will achieve the result of energy conservation and carbon reduction truly.
中文摘要………………………………………………i
英文摘要………………………………………………ii
致謝……………………………………………………iii
目錄……………………………………………………iv
表目錄…………………………………………………vi
圖目錄…………………………………………………vii
第一章 緒論……………………………………………1
1.1 前言………………………………………………1
1.2 研究動機與目的…………………………………3
1.3 相關文獻回顧……………………………………7
1.4 研究內容…………………………………………19
第二章 微型寒水式冷熱交換機基礎理論分析………21
2.1 微型寒水式冷熱交換機理論基礎………………21
2.2 本論文研究方法介紹……………………………25
2.3 本論文所採用元件設計與製作…………………31
2.4 理論分析與製作…………………………………40
2.5 微型寒水式節能熱交換機之特性………………42
第三章 實驗設計………………………………………44
3.1 熱量計算…………………………………………46
3.2 熱量單位……………………………………46
3.3 熱量單位計算……………………………46
3.4 熱負荷估算…………………………………47
3.5 舉例說明……………………………………52
第四章 實驗結果與分析………………………………57
4.1 研究實驗實機………………………………57
4.2 實驗步驟……………………………………59
4.3 桌上型電腦按裝『微型寒水式熱交換系統』
冰水溫度測試………………………………64
4.4 微型寒水式熱交換系統與水冷式散熱系統
實驗…………………………………………68
第五章 結論……………………………………………91
參考文獻 ………………………………………………94
附錄:本論文之專利公告 ……………………………98
英文論文大綱
簡歷
〔1〕http://changyang319.pixnet.net/blog/post/5446348
〔2〕簡嘉興,Investigation of Two-Phase Loop Thermosyphon Cooling System for Electronics. 雲林科技大學,機械工程系碩士論文,民國96年。
〔3〕Issam Mudawar, “Assessment of High-Heat-Flux Thermal Management Schemes,” IEEE Transactions on Components and Packaging Technologies, Vol., 24, No.2, 2001.
〔4〕D. Tuckerman, “Heat-Transfer Microstructure for integrated circuits,” Stanford University Ph.D. Thesis, 1984.
〔5〕Linan Jiang, James Mikkelsen, Jae-Mo Koo, David Huber, Shuhuai Yao, Lian Zhang, Peng Zhou, James G. Maveety, Ravi Prasher, Juan G. Santiago, Thomas W. Kenny, and Kenneth E. Goodson, “Closed-Loop Electroosmotic Microchannel Cooling System for VLSI Circuits,? IEEE Transactions on Components and Packaging Technologies, Vol.25, No.3, September, 2002.
〔6〕Aniruddha Pal, Yogendra K. Joshi, Monem H. Beitelmal, Chandrakant D. Patel, and Todd M. Wenger, “Design and Performance Evaluation of a Compact Thermosyphon,?IEEE Transactions on Comoonentsand Packing Technologies﹐Vol.25, No.4﹐December, 2002.
〔7〕T. Y. Lee﹐James A. Andrews﹐Peter Chow and David Saums﹐”Compact Liquid Cooling System for Small﹐Moveable Electronic Equipment,”IEEE Transactions on Components, Hybrids and Manufacturing Technology﹐Vol.15﹐No.5﹐October﹐1992.
〔8〕Marlin R. Vogel﹐Liquid Cooling Performance for a 3-D Multichip Module and Miniature Heat Sink,” IEEE Transactions on Components, Packaging﹐ and Manufacturing Technology, Part A﹐Vol.18﹐No.1﹐March﹐1995.
〔9〕Dan Faulkerb﹐Mehdy Khotan and Reza Shekarriz, “Practical Design of a 1000w/cm2 Cooling System,” 19th IEEE SEMI-THERM Symposium, pp223-pp230, 2003.
〔10〕Randall D. Dickinson﹐Shlomo Novotmy, Marlin Vogel and John Dunn, “A System Design Approach to Liquid-Cooled Microprocessors,” IEEE Inter Society Conference on Thermal Phenomena, pp413-420﹐2002.
〔11〕Yu C-W.﹐ Webb R.L.﹐“Thermal Design of a Desktop Computer System Using CFD Analysis,”IEEE Semi-Therm Symposim, 2001.
〔12〕宋志傑,『水冷式散熱座冷卻效益之研究』大同大學機械工程研究所碩士論文 ,民國99年。
〔13〕陳律安,『電腦水冷散熱系統之研究效益』國立成功大學工程科學系碩士論文,民國95年。
〔14〕黃振東,『電腦散熱片材料與製程技術介紹』工業雜誌Vol.171 pp130-pp138,民國90年。
〔15〕Sparrow﹐E.M.and Vemuri﹐S.B. , “Orientation effects on natural convection Radiation heat transfer form pin-fin arrays,”Int. J. Heat Mass Transfer﹐Vol.29﹐No3﹐pp359-pp368, 1986.
〔16〕Bejan﹐A. and Morega A.M. “Optimum arrays of plate fins And plate fins in laminar forced convection,”ASMEJ﹒Heat Transfer﹐Vol.115﹐pp75-pp81, 1993.
〔17〕Seri Lee“Optimum design and selection of heat sink,”IEEE Transactions On Components, Packaging, and Manufacturing Technology Part-A, Vol.18, No.4, pp812-817, 1995.
〔18〕Chapman C.L, Seri Lee, and Schmidt, B. L.﹐”Thermal Performance of an elliptical pin fin heat sink,” Semiconductor Thermal Measurement and Management Symposium﹐pp24-31, 1994.
〔19〕Faghri A and Ming-Ming Chen, “A numerical analysis of effects Of conjugate heat transfer, vapor compressibility, and viscous dissipation heat pipes,” Numerical Heat Transfer. Part-A, Vol.16 pp389-405, 1989.
〔20〕Vafai K, and Wang W, “Analysis of flow and heat transfer Characteristics of an asymmetrical flat plate heat pipe,” Int. J. Heat Mass Transfer﹐Vol.35﹐No.9﹐pp2087-pp2099, 1992.
〔21〕吳東錦,『三氧化二鋁奈米流體應用於電子散熱元件之研究』,國立台北科技大學能源與冷凍空調工程系碩士論文,民國96年。
〔22〕冷凍空調學科寶典,簡詔群、簡子傑編著,文笙書局發行。
〔23〕曜越科技(股)公司
http://www.thermaltake.com.tw/product_02.aspx
〔24〕冷凍空調實務,李居芳編著,全華圖書股份有限公司印行。
〔25〕經濟部能源局公告98年電力排放http://www.moeaboe.gov.tw/
〔26〕http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%203200%2B% 20-%20ADA3200DAA4BP%2(ADA3200BPBOX).html
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top