跳到主要內容

臺灣博碩士論文加值系統

(3.231.230.177) 您好!臺灣時間:2021/08/02 10:48
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:雷賀君
研究生(外文):Lei, Ho-Chun
論文名稱:以物件導向系統工程方法應用於客製化電腦輔助系統之開發
論文名稱(外文):The Application of Object-Oriented System Engineering to the Customized Computer Aided Systems Development
指導教授:鄧世剛鄧世剛引用關係
指導教授(外文):Deng, Shigan
口試委員:傅家啟賴峯民石大明劉達明孫懷谷王春和鄧世剛
口試委員(外文):Fu,JachihLai,Feng-MinTa-Ming ShinLiu, DamingSun, HuaikuWang, ChunhoDeng, Shigan
口試日期:2012-07-17
學位類別:博士
校院名稱:國防大學理工學院
系所名稱:國防科學研究所
學門:軍警國防安全學門
學類:軍事學類
論文種類:學術論文
論文出版年:2012
畢業學年度:100
語文別:中文
論文頁數:151
中文關鍵詞:Hall三維系統工程物件導向系統工程方法客製化電腦輔助系統
外文關鍵詞:Hall’s 3D System Engineering StructureObject-Oriented Systems Engineering MethodCustomized CAD System
相關次數:
  • 被引用被引用:0
  • 點閱點閱:225
  • 評分評分:
  • 下載下載:16
  • 收藏至我的研究室書目清單書目收藏:0
產品設計開發隨著資訊高度發展走向自動化,電腦作業逐漸取代過去的人工作業。然現今電腦輔助設計系統包羅萬象,龐大且複雜的系統功能未必能滿足顧客與設計者的需求。因此除了產品需要客製化以滿足使用者期望外,電腦輔助設計系統也應進行客製化以滿足設計者需求。考量市場的快速變動以及顧客的多元化,快速設計與少量多樣成為產品設計的趨勢。電腦輔助設計系統若能具備產品設計自動化與客製化的功能便可協助設計者縮短產品設計時程且滿足多變的顧客需求。
為滿足設計者之需求且避免電腦輔助設計系統過度開發,本研究以Hall三維系統工程結構為基礎做調整,以符合客製化系統之生命週期作為時間維,物件導向之系統工程方法作為邏輯維針對客製化系統進行分析,描述系統之需求、功能與架構進而建構客製化電腦輔助設計系統。
在硬體設計的客製化電腦輔助系統案例中,本研究以渦輪引擎高低壓軸為例,透過本研究之系統開發框架建置產品初步設計自動化之客製化電腦輔助設計系統。透過分析程序獲得產品設計之重要參數,進行渦輪引擎高低壓軸之初步設計。在軟體設計的客製化電腦輔助系統案例中,本研究以渦輪引擎零組件之藍圖資料為例,建置藍圖文字校對自動化系統。以物件導向建置之客製化電腦輔助系統不僅縮短產品開發的時程,針對現有的產品也能產生更多樣化的創意產品來滿足顧客的需求。

Product design and development move toward automation with the highly developed information technology. Computer operations have replaced the manual work gradually. However, types of current Computer-Aided Design (CAD) systems are in various ways. Large and complex functions of CAD system may not be able to meet the needs of the customer and the designer. While product design should be customized to meet the user expectations, CAD systems should also be customized to meet the designer needs. The current product design trend is toward rapid design and high-mix-low-volume design due to the rapidly change on the market and various needs of customers. The CAD systems with both automation and customization of product design can save the product design time and meet customer needs.
Therefore, in order to meet the demand of the designers and avoid over-development of the CAD systems, this study presents a three-dimensional morphology of systems engineering based on Hall’s three-dimensional morphology of systems engineering. It takes the life cycle of customized systems as time dimension and object-oriented systems engineering method as logic dimension. The three-dimensional morphology of systems engineering is used to analyze customized systems and to describe requirements, functionality, and system architecture to construct a customized CAD system.
The turbine engine is set as the hardware case study in this study. Preliminary design of high and low pressure shafts is completed by getting important parameters through analysis process. Blueprint checking system is set as the software case study and verified by blueprints of turbine engine. This platform framework can construct customized CAD systems not only save the product development time, but also develop more diverse creative products from existing products to meet customer demand.

致謝 ii
摘要 iii
ABSTRACT iv
目錄 vi
表目錄 ix
圖目錄 x
符號說明 xv
1. 緒論 1
1.1 研究背景與動機 1
1.2 研究目的 3
1.3 研究範圍 3
1.4 研究流程 3
1.5 論文架構 4
2. 文獻回顧 6
2.1 自動化設計 6
2.2 系統開發模式 7
2.3 資料探勘技術 13
2.4 CATIA二次開發 21
3. 研究方法 23
3.1 客製化系統生命週期 23
3.2 系統工程方法 24
3.2.1 以功能為基礎的系統工程方法 24
3.2.2 物件導向系統工程方法 33
3.3 客製化三維系統工程結構 45
3.3.1 邏輯維 49
3.3.2 時間維 58
3.3.3 知識維 62
3.4 小結 69
4. 實例探討 70
4.1 渦輪引擎高低壓軸自動化設計 70
4.1.1 客製化探討 70
4.1.2 系統分析與設計 74
4.1.3 系統開發與測試 98
4.1.4 系統部署與操作 103
4.1.5 系統維護與更新 107
4.2 藍圖文字自動化校對系統 107
4.2.1 客製化探討 107
4.2.2 系統分析與設計 108
4.2.3 系統開發與測試 115
4.2.4 系統部署與操作 121
4.2.5 系統維護與更新 124
5. 結論與建議 125
5.1 結論 125
5.2 未來建議 126
參考文獻 127
論文發表 133
自傳 134

[1]http://www.moeaidb.gov.tw/external/ctlr?PRO=news.NewsView&id=11380, (2012.5.25)
[2]陳柏瑞,“CAD/CAID 軟體之功能評估及在造形設計上之應用”,碩士論文,銘傳大學設計管理研究所,臺北,2005。
[3]黃元傑,“螺絲快速開發參數化研究”, 碩士論文,國立高雄應用科技大學模具工程系,高雄,2009。
[4]陳可翰,“整合設計限制於電腦輔助設計系統之應用與開發”, 碩士論文,聖約翰科技大學工業工程與管理系,臺北,2009。
[5]郭漢斌,“連續沖模之2D參數化設計”, 碩士論文,國立台灣科技大學工程技術研究所自動化及控制學程,臺北,2000。
[6]王安民,“魯氏鼓風機設計研究”, 碩士論文,遠東科技大學機械工程研究所,臺南,2012。
[7]楊崇和,“機艙裝備暨周邊管路設計之參數化研究”, 碩士論文,國立高雄海洋科技大學輪機工程研究所,高雄,2012。
[8]王宏達,“氣球擴張式血管支架參數化設計與模擬”, 碩士論文,臺灣大學機械工程學研究所,臺北,2011。
[9]Vernon, R., “International Investment and International Trade in the Product Cycle,” The Quarterly Journal of Economics, Vol. 80, No. 2, pp. 190-207, 1966.
[10]吳佳蓉,“口碑生命週期-以點影討論為例” ,碩士論文,國立臺灣科技大學企業管理學系研究所,臺北,2007。
[11]Hall, A. D., “Three-Dimensional Morphology of Systems Engineering,” IEEE Transactions on Systems Science and Cybernetics, Vol. 5, No. 2, pp. 156-160, 1969.
[12]Yelkur, R., and Herbig, P., “Global markets and the new product development process,” Journal of Product & Brand Management, Vol. 5 No. 6, pp.38-47, 1996.
[13]Cooper, R. G., “Doing It Right- Winning with New Products,” Product Development Institute, Published by the Ivey Business Journal, 2000.
[14]IEEE 1220, Application and Management of the Systems Engineering Process, Version 1998.
[15]ISO/IEC, Systems Engineering-Guide for ISO/IEC 15288 (System Life Cycle Processes), 2002.
[16]Department of Defense, Operation of the Defense Acquisition System DoD Instruction 5000.2, 2003.
[17]Stevenson, W. J., Introduction to Operations Management, 1st Edition, McGraw-Hill, New York, pp.132-133, 2005.
[18]Stark, J., Product Lifecycle Management. 21st Century Paradigm for Product Realization, 3rd printing, Springer, London, 2005.
[19]陳明,軟體工程,網奕資訊有限公司,臺北,2006。
[20]Benington, H. D., “Production of Large Computer Programs,” Proceedings of the ONR Symposium on Advanced Program Methods for Digital Computers, pp. 15-27, 1956. /Republished in Annals of the History of Computing, pp. 350-361, 1983. /Reprinted at the ICSE'87, Monterey, California, USA, pp. 299-310, 1987.
[21]Royce, W. W., “Managing the Development of Large Software Systems,” Proceedings, IEEE WESCON, pp. 1-9, August, 1970.
[22]Bally, L., Britton, J., and Wagner, K., “A Prototyping Approach to Information Systems Design and Management,” Information & Management, Vol. 1, No. 1, pp. 21-26, 1977.
[23]Boehm, B. W., “A Spiral Model of Software Development and Enhancement,” IEEE, pp. 61-72, 1988.
[24]Zachman, J. A., “A Framework for Information System Architecture,” IBM Systems Journal, Vol. 3, No. 26, pp. 276-292, 1987.
[25]Aoyama, M., “Concurrent Development Process Model,” IEEE Software, Vol. 10, No. 4, pp. 46-55, 1993.
[26]Jacobson, I., Booch, G., and Rumbaugh, J., The Unified Software Development Process, Addison-Wesley, Reading, Massachusetts, 1999.
[27]賴志強,“創新服務產業系統架構開發平台研究”, 博士論文,國防大學理工學院國防科學研究所,桃園,2012。
[28]Spiegler, I., “Technology and Knowledge: Bridging a ‘Generating’ Gap,” Information & Management, Vol. 40, No. 6, pp. 533-539, 2003.
[29]孫懷谷、王震宇、鄧世剛、雷賀君、米光武,“資料探勘技術於自動化藍圖校對規則之運用”,第16屆國防科技學術研討會,桃園,2007。
[30]Fayyad, U.M., “DataMining and Knowledge Discovery: Making Sense out of Data,” IEEE Expert, Vol. 11, No. 5, pp.20-25, 1966.
[31]Neaga, E. I., and Harding, J. A., “Data Mining Techniques for Supporting Manufacturing Enterprise Design,” International Conference on Industrial and Production Management, Quebec City, Canada, pp. 232-241, 2001.
[32]Sim, S. K., and Chan, Y. W., “A Knowledge-Based Expert System for Rolling-Element Bearing Selection in Mechanical Engineering Design,” Artificial Intelligence in Engineering, Vol. 6-3, pp.125-135, 1992.
[33]Ishino, Y., and Jin, Y., “Data Mining and Knowledge Acquisition in Engineering Design,” Data Mining for Design and Manufacturing: Methods and Applications, D. Braha, ed., Kluwer Academic, Dordrecht, pp. 145-160, 2001.
[34]Romanowski, C. J., and Nagi, R., “A Data Mining for Knowledge Acquisition in Engineering Design,” Data Mining for Design and Manufacture: Methods and Applications, D. Braha, ed., Kluwer Academic, Dordrecht, pp. 161-178, 2001.
[35]Agrawal, R., Imielinski, T., and Swami, A., “Mining Association Rules Between Sets of Items in Large Database,” Proceeding of the 1993ACM SIGMOD Conference, Washington, DC, 1993.
[36]Friedman, H. H. and Friedman, L., “Endorser Effectiveness By Product Type,” Journal of Advertising Research, Vol. 19, No. 5, pp. 63-71, 1979.
[37]Han, J., and Kamber, M., Data Mining: Concepts and Techniques, Morgan Kaufmann Publishers, San Francisco, 2001.
[38]Perreault, Jr., W. and Barksdale, Jr., H., “A Model-free Approach for Analysis of Complex Contingency Data in Survey Research,” Journal of Marketing Research, Vol.11, pp.503-515, 1980.
[39]Quinlan, J. R., C4.5 Programs for machine learning, Morgan Kaufmann Publishers, San Mateo, California, 1993.
[40]郭信宏,“應用資料探勘技術於面板檢測實證研究”,國立中央大學工業管理研究所碩士論文,桃園,2008。
[41]王進德、蕭大全,類神經網路與模糊控制理論入門,全華科技圖書,臺北,2002。
[42]孫懷谷、鄧世剛、雷賀君、王震宇,“統一塑模語言基於CATIA藍圖校對自動化程序開發”,中正嶺學報,已接受,2012。
[43]Kotler, P., Marketing Management, 10th ed., Prentice-Hall Inc, New Jersey, 2000.
[44]張尚嘉,“客製化程度與成本、產量、回應速度之關係模式”, 碩士論文,國立成功大學工業與資訊管理研究所,臺南,2007。
[45]Liu, C. Y. and Hsiao, S. W., “Form and Texture Effects on Product Image”, International Ergonomics Association XIV Triennial Congress and Human Factors and Ergonomics Society, IEA2000/HFES, POS-C, pp. 100-112, San Diego, US, 2000.
[46]Kruchten, P., The Rational Unified Process: An Introduction, 3rd Edition, Addison-Wesley, Reading, Massachusetts, 2003.
[47]UML Profile for DoDAF/MODAF, OMG Document: dtc/05-09-12, September 16, 2005.
[48]Scheuing, E. E. and Johnson, E. M., “A Proposed Model for New Service Development,” Journal of Services Marketing, Vol. 3, No. 2, pp. 25-34, 1989.
[49]陳嵩, “新金融商品開發活動之執行品質—成功、失敗專案之比較”, 產業金融季刊,第113期,第20-40頁,2001。
[50]Froehle, C. M. and Roth, V. A., “A Resource-Process Framework of New Service Development,” Production and Operations Management, Vol. 16, No. 2, pp. 169-188, 2007.
[51]Goldstein, S. M., Johnston, R., Duffy, J., and Rao, J., “The Service Concept: The Missing Link in Service Design Research?,” Journal of Operations Management, Vol. 20, pp. 121-134, 2002.
[52]Menor, L. J., Tatikonda, M. V., and Sampson, S. E., “New Service Develop- ment: Areas for Exploitation and Exploration,” Journal of Operations Management, Vol. 20, No. 2, pp. 135-157, 2002.
[53]ISO/IEC 15288-2008, Systems and Software Engineering-System Life Cycle Processes, 2008.
[54]International Council on Systems Engineering , System Engineering Handbook, 2011.
[55]http://travel.pthg.gov.tw/CmsLink.aspx?ID=251&LinkType=5&C_ID=226, (2008.1.26)
[56]吳仁和、林信惠,系統分析與設計理論與實務應用,智勝文化事業有限公司,臺北,2004。
[57]張裕益譯,UML理論與實作—個案討論與經驗分享,博碩文化股份有限公司,臺北,2001。
[58]OMG, The Unified Modeling Language V2.0, http://www.omg.org.
[59]張裕益譯,物件導向系統分析與設計,學貫行銷股份有限公司,臺北,2003。
[60]張裕益譯,UML使用手冊,博碩文化股份有限公司,臺北,2001。
[61]黃莉雯譯,UML學習手冊,美商歐萊禮臺灣分公司,臺北,2004。
[62]曾偉育,“智慧型交通模擬系統之物件導向分析與設計”,碩士論文,朝陽科技大學資訊管理系,臺中,2004。
[63]朱子傑譯,UML2百寶箱,碁鋒資訊股份有限公司,臺北,2005。
[64]Blandchard, B. S. and Fabryky, W. J., Systems Engineering and Analysis, Prentice Hall, New Jersey, 1990.
[65]Lai, C. C., Deng, S., Chin, H., and Peng, Y. S., “Development Platform for System Architecture of Small Service Businesses”, Systems Engineering, Vol. 14, No. 2, pp. 111-128, 2011.
[66]孫懷谷、王震宇、 鄧世剛、雷賀君,“運用資料探勘技術於藍圖材料表校對自動化之研究”,中正嶺學報,已接受,2011。

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top