跳到主要內容

臺灣博碩士論文加值系統

(3.236.68.118) 您好!臺灣時間:2021/08/04 20:55
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:陳德浩
研究生(外文):Tran DucHau
論文名稱:以BIM為基礎之整合設計流程架構
論文名稱(外文):The BIM-based Integrated Design Process Framework
指導教授:馮重偉馮重偉引用關係
指導教授(外文):Chung-Wei Feng
學位類別:碩士
校院名稱:國立成功大學
系所名稱:土木工程學系碩博士班
學門:工程學門
學類:土木工程學類
論文種類:學術論文
論文出版年:2012
畢業學年度:100
語文別:英文
論文頁數:113
外文關鍵詞:BIMIntegrated DesignBIM FrameworkInformation need frameworkIntegrated Project Delivery
相關次數:
  • 被引用被引用:3
  • 點閱點閱:1081
  • 評分評分:
  • 下載下載:397
  • 收藏至我的研究室書目清單書目收藏:1
The traditional design practice is characterized as a linear procedure, high level of fragmentations of silos of knowledge and expertise, and paper-based document centric communication model. The design practice has evolved dramatically from the traditionally linear procedure to an iterative procedure, which is mainly applied in current design practice, to a preferred integrated procedure. However, effective project information communication and coordination among project participants still is a key challenge.
Building Information Modeling (BIM) is an emerging development in the AEC industry. It is not just a new technology but a process transforming the Industry and re-engineering design and construction processes. BIM may be used as an information sharing repository to shift the traditionally linear and paper-based document centric model of project communication to model-based mechanism model, which has great potential to solve the above problem of Design Practice.
The paper proposes an information need framework developed based on BIM process maps which prepared for each design phase in an attempt to support for adopting BIM technology in Design Practice.

ACKNOWLEDGEMENT II
ABSTRACT III
CONTENTS IV
LIST OF TABLES VIII
LIST OF FIGURES X
CHAPTER 1 INTRODUCTION 1
1.1 Research Background and Motivation 1
1.2 Research Objectives and Scope 3
1.3 Research Procedure 5
1.4 Thesis Organization 7
CHAPTER 2 LITERATURE REVIEW 8
2.1 Problem Statement 8
2.2 Building Information Modeling(BIM) 11
2.2.1 Definitions and Characteristics 11
2.2.2 BIM Standards and Guidelines 14
2.2.3 BIM Process Maps 15
2.2.4 BIM Implementation Frameworks 17
2.3 Key Construction Project Delivery Routes 20
2.3.1 Design-Bid-Build (DBB) 21
2.3.2 Design-Build (DB) 22
2.3.3 Construction Management at Risk 23
2.3.4 Integrated Project Delivery 24
2.4 Integrated Design 26
2.4.1 Traditional Design Process 26
2.4.2 The Need for Integrated Design 28
2.4.3 Development of Integrated Design 31
2.5 Summary of Literature Review 34
CHAPTER 3 METHODOLOGY 36
3.1 Data Collection and Analysis Procedure. 36
3.2 Using BPMN for Describing Design Processes. 37
3.3 Defining a New DSM for Expressing Information Need Tables. 38
CHAPTER 4 DEVELOPING BIM PROCESS MAPS FOR DESIGN PHASE 41
4.1 Adoption of BIM and IPD Principles in the Design Phase 41
4.2 Conceptualization Phase 44
4.3 Schematic Design Phase 47
4.4 Detailed Design Phase 49
4.5 Implementation Document Phase 51
CHAPTER 5 DEVELOPMENT OF A BIM-BASED INTEGRATED DESIGN FRAMEWORK 53
5.1 Goals of the Framework 53
5.2 Requirements of the Framework 54
5.3 Framework Components 54
5.3.1 Project Phases(X-axis) 55
5.3.2 Processes(Y-axis) 56
5.3.3 Project Stakeholders(Z-axis) 57
5.4 Framework Deliverables 58
5.4.1 XY Plane: Project Phase versus BIM Processes 58
5.4.2 YZ plane: Project Stakeholders versus BIM Process 60
5.4.3 XZ Plane: Project stakeholders versus Project phases 77
5.5 Procedure for adapting the Framework to the Design Phase. 81
CHAPER 6 CASE STUDY AND VERIFICATIONS 84
6.1 Introduction 84
6.2 Purpose 1: Demonstration of the way the proposed framework is applied. 85
6.3 Purpose 2: Comparison between the Traditional Design Process and the New Method. 94
6.3.1 Phase 1: Predesign or conceptualization 97
6.3.2 Phase 2: Schematic Design 97
6.3.3 Phase 3: Detailed Design 98
6.3.4 Phase 4: Construction Document 99
6.3.5 Summary of Comparison between the Two Methods. 100
6.4 Result Verifications 101
CHAPTER 7 CONCLUSIONS 103
7.1 Conclusions 103
7.2 Future works 105
REFERENCES 106
APPENDIX 111
Appendix 1: Typical floor plan of the case study 111
Appendix 2: Sections of the case study. 112
Appendix 3: Structural Plans of the case. 113
1.AEC Bytes. Analysis, Research, and Reviews of AEC Technology http://www.aecbytes.com.
2.AGCAmerica. The Contractors Guide to BIM http://iweb.agc.org/iweb/Purchase/ProductDetail.aspx?Product_code=2926.
3.AIA (2007). Integrated Project Delivery: A Guide.
4.Alshawi, M. & Ingirige, B. (2003). Web-enabled project management: an emerging paradigm in construction. Automation in Construction, 12, 349-364.
5.Anderson, R. (2010). An introduction to the IPD Workflow for Vectorworks BIM users Nemetschek Vectorworks North America.
6.Arayici, Y., Coates, P., Koskela, L., Kagioglou, M., Usher, C. & O’Reilly, K. (2009). BIM implementation for an architectural practice. Managing It in Construction/Managing Construction for Tomorrow, vol. 26CRC Press, Taylor & Francis Group. Istanbul, Turkey.
7.Ashcraft, H. W. (2007). Building Information Modeling: A Framework for Collaboration.
8.Augenbroe, G. (1992). COMBINE: Project Overview. Delft University of Technology.
9.Autodesk. Autodesk White Papers www.autodesk.com/buildinginformation.
10.Aziz, D. Z. (2011). Integrated Design and Delivery System.
11.Bentley. Bentley White Papers http://www.bentley.com/en-US/Engineering+Architecture+Construction+Software+Resources/Bentley+Software+Publications/Bentley+Software+White+Papers/ .
12.Brangan, J., Kuehnel, P., Pace, S. & Lucas, M. (2010). BIM Process Model Review and Procedure. Building Stimulus, Millenium Science Complex, University Park, PA.
13.CIC (2010). BIM Project Execution Planning Guide version 2.0. CIC Research Group, Department of Architectural Engineering, The Pennsylvania State University.
14.Cohen, J. (2010). Integrated Project Delivery: Case Studies. AIA California Council 2010, Sacramento, USA.
15.CRCConstructionInnovation (2009). National Guidelines for Digital Modeling.
16.CURT (2004). Collaboration, Integrated Information and the Project Lifecycle in Building Design, Construction and Operation The Construction Users Roundtable (CURT).
17.CURT (2006). Optimizing the Construction Process: An Implementation Strategy The Construction Users Roundtable (CURT).
18.Deutsch, R. 2011. BIM and Integrated Design: Strategies for Architectural Practice, John Wiley & Sons, Inc.
19.Eastman, C. M., Teicholz, P., Sacks, R. & Liston, K. (2011). BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Architects, Engineers, Contractors, and Fabricators, John Wiley and Sons.
20.Elvin, G. (2007). Integrated Practice in Architecture, John Wiley & Sons.
21.Graphisoft. Graphisoft BIM Curriculum http://www.graphisoft.com/education/curriculum/.
22.GSA. GSA Building Information Modeling Guide Series 2007 http://www.gsa.gov/bim.
23.Gu, N. & London, K. (2010). Understanding and facilitating BIM adoption in the AEC industry. Automation in Construction, 19, 988-999.
24.Hartmann, T., Fischer, M. & Haymaker, J. (2009). Implementing information systems with project teams using ethnographic–action research. Advanced Engineering Informatics, 23, 57-67.
25.Howard, R. & Björk, B.-C. 2008. Building information modelling – Experts’ views on standardisation and industry deployment. Advanced Engineering Informatics, 22, 271-280.
26.Jung, Y. & Joo, M. (2011). Building information modelling (BIM) framework for practical implementation. Automation in Construction, Vol 20, p 126-133.
27.Löhnert, G., Dalkowski, A. & Sutter, W. (2003). Task 23: Optimization of Solar Energy Use in Large Buildings, A Guideline for Sustainable and Solar-optimized Building Design. International Energy Agency(IEA).
28.Mihindu, S. & Arayici, Y. (2008). Digital construction through BIM systems will drive the re-engineering of construction business practices. 12th international conference of Information Visualisation, IEEE Computer Society,. London, UK.
29.Mustaklem, O. 2011. The BIM-based Information Integration Sphere for Construction Projects. Master Thesis, National Cheng Kung University.
30.NBIMS (2007). Version 1- Part 1: Overview, Principles, and Methodologies.
31.NIBS. National Institute of Building Sciences www.nibs.org/ .
32.NIST (2004). 2004 Annual Report. U.S. Department of CommerceTechnology Administration,National Institute of Standards and Technology.
33.Panushev, I. S. & Pollalis, S. N. (2006). A Framework for Delivery of Integrated Building Information Modeling. Joint International Conference on Computing and Decision Making in Civil and Building Engineering. Montréal, Canada.
34.Poel, B., Vries, G. D. & Cruchten, G. V. (2002). Integrated Design Process in Practice. International Energy Agency(IEA).
35.Schwegler, B. R., Fischer, M. A., O’Connell, M. J., Hänninen, R. & Laitinen, J. (2001). Near-, Medium-, & Long-Term Benefits of Information Technology in Construction,Center for Integrated Facility Engineering (CIFE), University of Salford.
36.Senate (2007). BIM Requirements 2007. VTT Technical Research Centre of Finland (VTT).
37.Singh, V., Gu, N. & Wang, X. (2011). A theoretical framework of a BIM-based multi-disciplinary collaboration platform. Automation in Construction, 20, 134-144.
38.Smith, D. K. (2008). Building Information Modeling (BIM). National BIM Standard Project Committee http://www.wbdg.org/bim/bim.php.
39.Succar, B. BIMthinkspace http://www.bimthinkspace.com/ .
40.Succar, B. (2009). Building information modelling framework: A research and delivery foundation for industry stakeholders. Automation in Construction, 18, 357-375.
41.Suermann, P. C. & Issa, R. R. A. (2009). Evaluating Industry Perceptions of Building Information Modeling(BIM) Impact on Construction. International Journal of IT in Construction, Vol. 14, pp 574-594.
42.Wikforss, Ö. & Löfgren, A. (2007). Rethinking Communication in Construction. ITcon.
連結至畢業學校之論文網頁點我開啟連結
註: 此連結為研究生畢業學校所提供,不一定有電子全文可供下載,若連結有誤,請點選上方之〝勘誤回報〞功能,我們會盡快修正,謝謝!
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top