跳到主要內容

臺灣博碩士論文加值系統

(3.231.230.177) 您好!臺灣時間:2021/08/04 09:57
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:張倍誠
研究生(外文):Pei-ChengChang
論文名稱:應用模糊多準則決策方法建構專案績效衡量系統
論文名稱(外文):Developing the Performance Assessment System of Project Management Using Fuzzy Multicriteria Decision Making Approaches
指導教授:陳梁軒陳梁軒引用關係
指導教授(外文):Liang-Hsuan Chen
學位類別:碩士
校院名稱:國立成功大學
系所名稱:工業與資訊管理學系碩博士班
學門:商業及管理學門
學類:其他商業及管理學類
論文種類:學術論文
論文出版年:2012
畢業學年度:100
語文別:中文
論文頁數:66
中文關鍵詞:專案管理專案績效衡量模糊集合理論模糊多準則決策模糊資料包絡分析法
外文關鍵詞:Project ManagementProject Performance MeasurementFuzzy Set TheoryFuzzy Multicriteria Decision MakingFuzzy Data Envelopment Analysis
相關次數:
  • 被引用被引用:2
  • 點閱點閱:124
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
專案管理有別於一般的企業管理,其實務在產業間日趨受到重視,相關方法論也越來越完整,甚至已有許多專案管理之應用軟體,可以解決傳統排程、監控所需之報表計算及問題。然而,專案管理不應僅是數據的產生而已,應在專案完成後,對於相關數據進行績效分析與專案執行成效的檢討,進而得以對後續專案規劃之決策提供有用的資訊或指導方針。在專案的執行過程中,目標之間的相互衝突是相當常見的現象,而面對這些衝突的解決與取捨,往往考驗著管理者與專案團隊的應變能力。但是經由不同的取捨,可能會對專案完成後之成果造成不一樣的績效表現。因此如何規劃一個有效的評核專案執行績效之衡量方法,亦是專案管理研究的重點之一。
本研究針對專案管理之績效衡量,以模糊多準則決策方法,建構專案績效評量指標,以模糊網絡分析法對具有相依行之準則進行指標及權重的建構,而利用此事前權重之方法,以高階管理者的觀點進行專案績效的排序。接著利用事後權重的概念,以模糊資料包絡分析法,計算績效指標之效率。並探討兩種方法進行專案績效評估所產生的結果並分析,並以此建構專案績效的評估流程,透過此一回饋機制的建立,幫助管理者在未來之專案指派與提供決策上之參考及支持。

Project management is different from most aspects of business management and has attracted more and more attentions in firms. Moreover, there are currently many related software applications that can solve problems like scheduling and controlling. However, project management not only produces data, but also measures and analyzes the performance and the result of project execution. Based on obtained information and guidelines, decision makers can then plan projects more completely in the future. Conflicts between project goals often arise during project execution and how to trade off between goals in order to overcome such conflicts is often the most difficult task that project managers and project groups face. As a result, how to develop an effective method to measure project performance to aid in trade-off decisions is important issue in project management.
In this study, we use fuzzy multicriteria decision making approaches to measure the performance of project management. First, we use the Fuzzy Analytic Network Process (FANP) which contains the concept of ex ante weight to develop the index and weights of dependent criteria, based on the subjective views of senior managers. We also use the concept of ex post weight to calculate the performance efficiency of projects using fuzzy data envelopment analysis. Finally, we analyze the results from these two different methods and develop the project performance assessment process. With the help of this feedback process, senior managers can better assign projects and achieve better results.

摘要 I
Abstract II
誌 謝 III
目 錄 IV
表目錄 VI
圖目錄 VII
第一章 緒論 1
第一節 研究背景與動機 1
第二節 研究目的 2
第三節 研究範圍與限制 3
第四節 研究流程 3
第五節 論文架構 4
第二章 文獻探討 6
第一節 專案管理 6
第二節 專案管理績效評估 10
第三節 模糊集合理論 15
第四節 模糊多準則決策 20
第五節 模糊資料包絡分析 24
第三章 模式建構 27
第一節 研究構想 27
第二節 評估模式建構 29
第三節 專案績效衡量流程 38
第四章 模式應用 40
第一節 產業介紹 40
第二節 案例演算 41
第三節 演算結果討論 53
第五章 結論與未來研究方向 56
第一節 結論 56
第二節 未來研究方向 57
參考文獻 59
附錄 65

高強、黃旭男、Toshiyuki Sueyoshi,(民 92年),管理績效評估資料包絡分析法,華泰文化事業公司,台北市。
王慶富,(民 85年),專案管理,聯經出版事業公司,台北縣。
Al-Fanzine, M. A., and Haouari, M. (2005), “A bi-objective model for robust resource constrained project scheduling, International Journal of Production Economics, 96, 175–187.
Amiri, P.M. (2010), “Project selection for oil-fields development by using the AHP and fuzzy TOPSIS methods, Expert Systems with Applications, 37, 6218–6224.
Asady, B. (2011), “Revision of distance minimization method for ranking of fuzzy numbers, Computers and Mathematics with Applications, 62, 2246–2258.
Asady, B. and Zendehnam M. (2007), “Ranking of fuzzy numbers by distance minimization, Computers and Mathematics with Applications, 11, 2589–2598.
Atkinson, R. (1999), “Project management: cost, time and quality, two best guesses and a phenomenon, its time to accept other success criteria, International Journal of Project Management, 17, 337–342.
Ayağ Z.and Özdemir R. G. (2011), “An intelligent approach to machine tool selection through fuzzy analytic network process, Journal of Intelligent Manufacturing, 22, 163–177.
Azadeh A., Asadzadeh S.M., Bukhari A. and IzadbakhshH.R. (2011), “ An integrated fuzzy DEA algorithm for efficiency assessment and optimization of wireless communication sectors with ambiguous data, International Journal of Advanced Manufacturing Technology, 52, 805-819.
Baccarini, D. (1999), “The logical framework method for defining project success, Project Management Journal, 30 (4), 25–32.
Banker R.D. (1984), Charnes A. and Cooper W.W., “Some models for estimating technical and scale efficiencies in data envelopment analysis, Management Science , 30,1078-1092.
Bannerman, P.L. (2008), “Defining project success: a multilevel framework, PMI Research Conference.
Barkley, B.T. and Saylor, J.H. (1994), Customer-Driven Project Management, New York: McGraw-Hill.
Blindenbach-Driessen, F. (2006), “Innovation management in project-based firms. Doctoral thesis, School of Management Erasmus University, Rotterdam.
Buyukozkan G. and Cifci G. (2012),“A novel hybrid MCDM approach based on fuzzy DEMATEL, fuzzy ANP and fuzzy TOPSIS to evaluate green suppliers, Expert Systems with Applications , 39, 3000–3011.
Carlsson, C. and Fuller, R. (1996), “Fuzzy multiple criteria decision making , Fuzzy Sets and Systems, 78, 139-153.
Chang, P.T. and Lee J.H. (2012), “A fuzzy DEA and knapsack formulation integrated model for project selection, Computers & Operations Research, 39, 112–125.
Chang, W.K. (1981), “Ranking of fuzzy utilities with triangular membership functions, International Conference on Plicy Analysis and Informations Systems, Tamkang University, 163-171.
Charnes A., Cooper W.W. and Rhodes E. (1978), “Measuring the efficiency of decision making units, European J. Operational Research , 2, 429-444.
Chen, S. (1985), “Ranking fuzzy numbers with maximizing set and minimizing set, Fuzzy Sets and Systems, 17, 113-129.
Chen, S.J. and Hwang, C.L. (1992), Fuzzy Multiple Attribute Decision Making: Methods and Applications, Springer-Verlag New York.
Cleland, D.I., and King, W.R. (1983), System Analysis and Project Management, New York: McGraw-Hill.
Cooke-Davies, T.J. (2002), “The ‘real’ success factors on projects, International Journal of Project Management, 20, 185–190.
Dubois, D. and Prade, H. (1983), “Ranking of fuzzy numbers in the setting of possibility theory, Information Science, 30, 183–224.
Dweiri, F.T. and Kablan, M.M. (2006), “Using fuzzy decision making for the evaluation of the project management internal efficiency, Decision Support Systems, 42 , 712– 726.
Farris, J., Groesbeck, R.L., Van Aken, E.M. and Letens, G. (2006), “ Evaluating the relative performance of engineering design projects: a case study using data envelopment analysis, IEEE Transaction on Engineering Management, 53(3), 471–482.
Fortemps, P. and Roubens, M. (1996), “Ranking and defuzzification methods based on area compensation, Fuzzy Sets and Systems, 82, 319–330.
Gray, C.F., Larson, E.W. (2000), Project Management: The Managerial Process., Boston : McGraw-Hill.
Hellendoorn, H. (1997), “After the fuzzy wave reached Europe, European Journal of Operational Research, 99, 58-71.
Jain, R. (1976), “Decision-making in the presence of fuzzy variable, IEEE Transactions on Systems, 6, 698-703.
Jung, U. and Seo, D.W. (2010), “An ANP approach for R&D project evaluation based on interdependencies between research objectives and evaluation criteria, Decision Support Systems, 49, 335–342.
Kauffmann, P., Keating, C. and Considine, C. (2002), “Using Earned Value Methods to Substantiate Chang-of-Scope Claims, Engineering Management Journal, 14(1), 13-20.
Kao C. and Liu S.T. (2000), “Fuzzy efficiency measures in data envelopment analysis, Fuzzy Sets and Systems, 113(3), 427–37.
Kao C. and Liu S.T. (2005), “Data envelopment analysis with imprecise data: An application of Taiwan machinery firms, International Journal of Uncertainty Fuzziness and Knowledge-Based Systems, 13, 225-240.
Kerner, H. (1994), Project Management: A System Approach to Planning, Scheduling, and controlling, Van Nosyra and Reinhold,4^thed.
Kerzner, H. (2004), Advanced Project Management: Best Practices on Implementation, John Wiley & Sons.
Klir, G.J. and Yuan, B. (2005), Fuzzy Sets and Fuzzy logic Theory and Application, Taiwan: Pearson Education Taiwan.
Lee, H.S. and Chu, C.W. (2005), “A Fuzzy Multiple Criteria Decision Making Model For Airline Competitiveness Evaluation, Proceedings of the Eastern Asia Society for Transportation Studies, 5, 507 - 519.
Liou J. J.H., Tzeng G.H., Tsai C.Y. and Hsu C.C. (2011),“A hybrid ANP model in fuzzy environments for strategic alliance partner selection in the airline industry, Applied Soft Computing, 11, 3515–3524.
Meade, L. and Sarkis, J. (1999), “Analyzing organizational project alternatives for agile manufacturing processes: an analytic network approach, International Journal of Production Research, 37(2), 241–261.
Might, R.J. and Fischer, W.A. (1985), “The role of structural factors in determining project management success, IEEE Transaction on Engineering Management, 32 (2), 71–77.
Mikhailov, L. (2004), “A fuzzy approach to deriving priorities from interval pairwise comparison judgements, European Journal of Operational Research, 159, 687–70.
Munns, A.K. and Bjeirmi, B.F. (1996), “The role of project management in achieving project success, International Journal of Project Management, 4, 81–87.

Neely, A., Gregory, M. and Platts, K. (2005), “Performance measurement system design: a literature review and research agenda, International Journal of Operations & Production Management, 25 (12), 1228–1263.
Pinto, J.K. (2002), “Project management, Research-Technology Management, 45(2), 22–37.
Pinto, J.K. and Prescott, J.E. (1988), “Variations in critical success factors over the stages in the project life cycle, Journal of Management, 14(1), 5–18.
Ramík, J. and Perzina R. (2010), “A method for solving fuzzy multicriteria decision problems with dependent criteria, Fuzzy Optimization and Decision Making, 9,123–141.
Sevkli M. , Oztekin A., Uysal O., Torlak G., Turkyilmaz A. and Delen D. (2012), “Development of a fuzzy ANP based SWOT analysis for the airline industry in Turkey, Expert Systems with Applications, 39, 14–24.
Shenhar, A.J., Dvir, D., Levy, O. and Maltz, A.C. (2001), “Project success: a multidimensional strategic concept, Long Range Planning, 34(6), 699–725.
Strnad, D. and Guid, H. (2010), “A fuzzy-genetic decision support system for project team formation, Applied Soft Computing, 4, 1178-1187.
Tukel, O.I. and Rom W. (2001), “An empirical investigation of project evaluation criteria, International Journal of Operations & Production Management, 21(3), 400–16.
Yager, R.R. (1981), “A procedure for ordering fuzzy subsets of the unit interval, Information Sciences, 24 , 143- 161.
Yeh C.H., Deng H.P. and Chang Y.H. (2000), “Fuzzy multicriteria analysis for performance evaluation of bus, European Journal of Operational Research, 126, 459-473.
Zadeh, L.A (1975)., “The Concept of Linguistic Variable and its Application to Approximate Reasoning, Part 1, Information Science, 8, 199-249.
Zadeh, L. A. (1986), “Fuzzy sets, Information and Control, 8, 338-353.
Zadeh, L.A. (1998), “Maximizing sets and fuzzy markov algorithms, IEEE Transactions on Systems Man and Cybernetics, 28(1), 96-108.

連結至畢業學校之論文網頁點我開啟連結
註: 此連結為研究生畢業學校所提供,不一定有電子全文可供下載,若連結有誤,請點選上方之〝勘誤回報〞功能,我們會盡快修正,謝謝!
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊