跳到主要內容

臺灣博碩士論文加值系統

(3.236.124.56) 您好!臺灣時間:2021/08/02 08:44
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:戴銘政
研究生(外文):Ming-Zheng,Dai
論文名稱:高效率昇壓型白光LED驅動器之研製
論文名稱(外文):High Efficiency Boost Driver for White LED
指導教授:鄧一中
指導教授(外文):I-Chung Deng
口試委員:鄧一中吳建宏蘇祖澤
口試委員(外文):I-Chung DengWu, ChienhungSu,Tsu-Tse
口試日期:2012-07-16
學位類別:碩士
校院名稱:臺北城市科技大學
系所名稱:嵌入式系統產業研發碩士專班
學門:電算機學門
學類:軟體發展學類
論文種類:學術論文
論文出版年:2012
畢業學年度:100
語文別:中文
論文頁數:52
中文關鍵詞:白色發光二極體LED直流昇壓轉換
外文關鍵詞:White LEDLEDDC to DC Converter
相關次數:
  • 被引用被引用:5
  • 點閱點閱:466
  • 評分評分:
  • 下載下載:184
  • 收藏至我的研究室書目清單書目收藏:0
LED較一般白熾燈泡具備省電、重量輕與壽命長等優點,非常符合可攜式產品各項需求之特性,相較於傳統CCFL背光源,白光LED更符合歐盟要求產品製造過程不含汞、鹵素與或鉛,在進行產品回收時不會破壞環境,故白光LED顯然成為未來最蓬勃發展之背光應用主流,由於目前移動式電子裝置因應終端應用需求,電力消耗量大增,故背光模組消耗功率已受到更嚴苛的要求。
本論文以直流對直流昇壓轉換電路為基礎,研製一高效率白光LED驅動器,並具備過電流、過電壓及低電壓保護,可應用於使用鋰電池做為電源電路之移動式電子裝置,實驗結果顯本論文之高效率昇壓型白光LED驅動器,其效率都保持在80%以上,符合電路預期之性能。

LEDs present many advantages over incandescent light sources including lower energy consumption, light weight, and longer lifetime, etc. It fits the requirements of portable products. And unlike CCFLs, LED-lit monitors contain no mercury, halogen or lead. That makes them safe for the environment when the time comes to recycle them. So the white LED has apparently become the mainstream of backlighting applications in the future. Because of the requirements of complex application, the power consumption is rising.

The more energy-saving backlight module is needed. In this thesis, a high performance boost mode DC-DC converter circuit with protection circuits of over-load, high voltage, and low voltage is developed for driving white LED. This circuit would be used in mobile electronic devices as power supply circuit of lithium batteries. From the experimental results, the performance of this circuit exceeds 80% which agrees with the expected requirement.

摘要 i
ABSTRACT ii
誌謝 iii
目錄 iv
圖目錄 vi
表目錄 ix
第一章 緒論 1
1.1 研究背景與目的 1
1.2 研究方法 4
1.3 論文大綱 5
第二章 白光LED介紹 6
2.1 前言 6
2.2 LED發光原理 8
2.3 LED失效模式 11
2.4 LED使用方式 13
2.5 白光LED種類 13
第三章 白光LED驅動電路 17
3.1前言 17
3.2 常用白光LED驅動方式 20
第四章 電路設計及實驗結果 23
4.1 前言 23
4.2 電路設計 23
第五章 結論與未來展望 45
5.1結論 45
5.2 未來展望 45
參考文獻 46


[1]黃建豪,「高亮度LED之驅動電路研製」,成功大學電機工程系,四頁,民國九十八年七月。
[2]張詩意,「高功率白光LED之混光實驗、模組設計及模擬優化」,國立台灣科技大學電子工程系,二十三頁,民國九十五年六月。
[3]C.-H. Lin, T. Pimenta and M. Ismail, “A low-voltage low-power CMOS V-I converter with rail-to-rail differential input for filtering applications,” in Proc. IEEE ICECS, Sep. 1998, pp. 165–168.
[4]L. Acosta, M. Jimenez, R. G. Carvajal, A. J. L.-Martin, and J. R.-Angulo, “Highly liner tunable COMS Gm-C Low-Pass Filter,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 56, no. 10, pp. 2145–2158, Oct. 2009.
[5]T. Y. Man, P. K. Mok and J. Chan, “A 0.9-V input ciscontinuous-conduction-mode boost converter with CMOS-control rectifier,” IEEE J. Solid-State Circuits, vol. 43, no. 9, pp. 2036–2046, Sep. 2008.
[6]Y. Leung, P. K. T. Mok, and K. N. Leung, “A 1-V integrated current mode boost converter in standard 3.3/5-V CMOS technologies,” IEEE J. Solid-State Circuits, vol. 40, no. 11, pp. 2265–2274, Nov. 2005.
[7]W.-H. Ki, “Signal flow graph in loop gain analysis of DC-DC PWM CCM switching converters,” IEEE Trans. Circuits Syst. I, Fundam. Theory Appl. vol. 45, no. 6, pp. 644–655, June 1998.
[8]W. Yu, J.-S. Lai, H. Ma and C. Zheng, “High-efficiency DC-DC converter with twin bus for dimmable LED lighting,” IEEE Trans. Power Electron., vol. 26, no. 8, pp. 2095–2100, Nov. 2008.
[9]R. Lu, S. Gauza and S.-T. Wu, “LED-Lit LCD TVs,” Mol. Cryst. Liq. Cryst., vol. 488, pp. 246–259, Sep. 2008.
[10]Datasheet: MAX17061, “8-string white LED driver with SMBus for LCD panel applications,” Maxim Integrated Products, Inc.[Online], Available: http://datasheets.maxim-ic.com/en/ds/MAX17061.pdf
[11]Datasheet: LED7706, “6-rows 30 mA LEDs driver with boost regulator for LCD panels backlight,” STMicroelectronics, Inc. [Online], Available: http://www.st.com/stonline/books/pdf/docs/14390.pdf
[12]B. Bryant and M. K. Kazimierczuk, “Open-loop power-stage transfer functions relevant to current-mode control of boost PWM converter operating in CCM,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 52, no. 10, pp. 2158–2164, Oct. 2005.
[13]L. Xinquan, J. Ligang, H. Juncai and L. Xianrui, “The design of A low voltage and high speed driver circuit for boost DC-DC converter,” in Proc. IEEE ASICON, Oct. 2003, pp. 635–638.
[14]T. Dake and E. Özalevli, “A precision high-voltage current sensing circuit,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 55, no. 5, pp. 1197–1202, June 2008.
[15]T.-Y. Lo and C.-H. Hung, “A 40-MHz double differential-pair CMOS OTA with -60-dB IM3,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 55, no. 1, pp. 258–265, Jan. 2008.
[16]Datasheet: ZXSC400, “LED driver boost converter,” Zetex Semiconductor [Online], Available: http://www.diodes.com/datasheets/ZXSC400.pdf
[17]Datasheet: RT9285C, “Tiny package, high performance, diode embedded white LED driver,” Richtek Technology Corporation, [Online], Available: http://www.richtek.com/download_ds.jsp?s=280
[18]M. J. M. Pelgrom, A. C. J. Duinmaijer and, A. P. G. Welbers, “Matching properties of MOS transistors,” IEEE J. Solid-State Circuits, vol. 24, no. 5, pp. 1433–1440, Oct. 1989.
[19]K. Shibata and P. Cong-Kha, “A compact adaptive slope compensation circuit for current-mode DC-DC converter,” in Proc. IEEE ISCAS, Jun. 2010, pp. 1651–1654.
[20]Datasheet: LM3503, “Dual-display constant current LED driver with analog brightness control,” National Semiconductor Corporation, [Online], Available: http://www.national.com/ds/LM/LM3503.pdf
[21]Application Note: “Boost converter LED driver using the Supertex HV9911,” Supertex Inc., [Online], Available: http://www.supertex.com/pdf/app_notes/AN-H55.pdf
[22]K.-H.Chen, C.-J. Chang and T.-H. Liu, “Bidirectional current-mode capacitor multiplier for on-chip compensation,” IEEE Trans. Power Electron., vol. 23, no. 1, pp. 180–188, Jan. 2008.
[23]C.-H. Wu and C.-L. Chen, "High-efficiency current-regulated charge pump for a white LED driver", IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 56, no. 10, pp. 763–767, Oct. 2009.
[24]Datasheet: MAX1553, “High-efficiency, 40V step-up converters for 2 to 10 white LEDs,” Maxim Integrated Products, [Online], Available: http://datasheets.maxim-ic.com/en/ds/MAX1553-MAX1554.pdf
[25]S.-H. Lee, J.-H. Park, J.-H. Yoon, M.-H. Park and S.-D. Yeo, “Improvement of response time and contrast ratio in 42-inch TFT-LCD panel for HDTV,” in Proc. IEEE ICCE, Jan. 2005, pp. 199–200.
[26]F.-C. Wang, C.-W. Tang and B.-J. Huang, “Multivariable robust control for a red–green–blue LED lighting system," IEEE Trans. Power. Electron., vol.25, no.2, pp.417–428, Feb. 2010.
[27]Datasheet: LT3593, “1 MHz white LED driver with output disconnect and one pin current programming,” Linear Technology Corporation, [Online], Available: http://cds.linear.com/docs/Datasheet/3593f.pdf
[28]H. -J. Chiu, Y. -K, Lo, J. -T. Chen, S. -J. Cheng, C. -Y. Lin and S. -C. Mou, "A high-efficiency dimmable LED driver for low-power lighting applications," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 735–743, Oct. 2010.
[29]Datasheet: LM3502, “Step-up converter for white LED applications,” National Semiconductor Corporation, [Online], Available: http://www.national.com/ds/LM/LM3502.pdf
[30]Datasheet: TPS61150A, “Dual output boost WLED driver using single inductor,” Texas Instruments Incorporated, [Online], Available: http://focus.ti.com/docs/prod/folders/print/tps61150a.html
[31]D. Gacio, J. M. Alonso, J. Garcia, L. Campa, M. Crespo and M. Rico-Secades, “High frequency PWM dimming technique for high power factor converters in LED lighting,” in Proc. IEEE APEC, Feb. 2010, pp. 743–749.
[32]Datasheet: LTC3783, “PWM LED driver and boost, Flyback and SEPIC converter,” Linear Technology, [Online], Avaliable:<http://cds.linear.com/docs/Datasheet/3783fb.pdf>.
[33]C.-C. Chen, C.-Y. Wu and T.-F. Wu, “Fast transition current-type burst-mode dimming control for the LED back-light driving system of LCD TV,” in Proc. IEEE PESC, Jun. 2006, pp. 1–7.
[34]C.-H Lin, “Digital-dimming controller with current spikes elimination technique for LCD backlight electronic ballast,” IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1881–1888, Dec. 2006.
[35]J. Garcia, M. A. Dalla-Costa, J. Cardesin, J. M. Alonso and M. Rico-Secades, “Dimming of high-brightness LEDs by means of luminous flux thermal estimation,” IEEE Trans. Power Electron., vol. 24, no. 4, pp. 1107–1114, Apr. 2009.
[36]Y.-T. Hsieh, B.-D. Liu, J.-F. Wu, C.-L. Fang, H.-H. Tsai and Y.-Z. Juang, “A high current accuracy boost white LED driver based on offset calibration technique,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 58, no. 4, pp. 244–248, Apr. 2011.
[37]S. Buso, G. Spiazzi, M. Meneghini and G. Meneghesso, “Performance degradation of high-brightness light emitting diodes under DC and pulsed bias,” IEEE Trans. Device Mater. Rel., vol. 8, no. 2, pp. 312–322, Jun. 2008.
[38]D.-H. Yoo and G.-Y. Jeong, “LCD panel sector-dimming controlled high efficiency LED backlight drive system,” in Proc. IEEE ICEMS, Nov. 2009, pp. 1–6.
[39]J. Lu and X. Wu, “A novel multiple modes PWM controller for LEDs,” in Proc. IEEE ISCAS, May, 2009, pp. 1767–1770.
[40]G. Nenna, M. Barra, A. Cassinese, R. Miscioscia, T. Fasolino, P. Tassini, C. Minarini and D. della Sala, “Insights into thermal degradation of organic light emitting diodes induced by glass transition through impedance spectroscopy,” J. Appl. Phys. vol. 105, no. 12, pp. 123511–123511-6, Jun. 2009.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top