(3.236.231.14) 您好!臺灣時間:2021/04/14 01:58
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果

詳目顯示:::

我願授權國圖
: 
twitterline
研究生:曾智群
研究生(外文):Chih-Chun Tseng
論文名稱:考慮存貨重疊機制與數量折扣下之不良品可立即退貨的整合性存貨模型
論文名稱(外文):The Integrated Inventory Model with Immediate Return for Defective Items under Overlapping and Quantity Discount
指導教授:于鴻福于鴻福引用關係盧正壽盧正壽引用關係
指導教授(外文):Hong-Fwu YuCheng-Shou Lu
口試委員:于鴻福盧正壽陳昭宏周建新
口試委員(外文):Hong-Fwu YuCheng-Shou LuChao-Hung ChenChien-Hsin Chou
口試日期:2013-06-03
學位類別:碩士
校院名稱:國立高雄應用科技大學
系所名稱:財富與稅務管理系
學門:商業及管理學門
學類:財務金融學類
論文種類:學術論文
論文出版年:2013
畢業學年度:101
語文別:中文
論文頁數:68
中文關鍵詞:整合性存貨模式立即退貨數量折扣存貨重疊
外文關鍵詞:Integrated Inventory ModelImmediate ReturnQuantity DiscountOverlapping
相關次數:
  • 被引用被引用:0
  • 點閱點閱:696
  • 評分評分:系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔
  • 下載下載:17
  • 收藏至我的研究室書目清單書目收藏:0
在存貨管理的議題上,EOQ 和 EPQ 模型是分別從零售商和供應商的利益為考量的最佳化模型,惟如此往往造成另一方面的損害。因此,若欲建立長期的合作關係,那麼整合零售商和供應商彼此利益之整合性存貨模型的建立即有其必要性。在一個整合性存貨模式中,除考量供應商和零售商之最適生產量與訂購量外,另一個重要的議題即是小批量運送模式;亦即,在零售商的一次訂購中,供應商分批運送最佳次數和每次運送的最佳數量。本文之目的即是要在考量存貨重疊機制與數量折扣之條件下,探討具不良品之單一供應商和單一零售商的整合性存貨模式,其中當零售商接收一批產品後會立即施予100% 檢驗,且所檢驗出的不良品可立即退貨給供應商。本文在以最小化供應商與零售商之總整合成本為目標,求解出零售商之最佳訂購量與供應商之最佳運送次數。
In inventory management, the EOQ and EPQ models can be used to determine optimal inventory policies for retailers and vendors, respectively; however, such optimal solutions for EOQ and EPQ models are usually detrimental to the other. Hence, to establish a long-term cooperative relationship between the vendor and retailer, an integrated inventory model is needed. The purpose of this paper is to investigate a single-vendor single-retailer production-inventory for products with imperfect quality under overlapping and quantity discount. It is assumed that a 100% inspection process is conducted to screen out the defectives contained in the received lot and the defectives screened out during the 100% inspection process will be returned to the vendor immediately. By maximizing the expected annual integrated total profit, the optimal number of shipments in a cycle and the optimal size of each shipment are determined.
目錄
中文摘要
ABSTRACT
誌謝
表目錄
圖目錄
第一章緒論
1.1 研究背景與機
1.2 研究目的
1.3 本文架構

第二章整合存貨模型之簡介
2.1 Ha & Kim (1997) 模型簡介
2.1.1 符號與假設
2.1.2 整合存貨模型圖
2.1.3 成本分析
2.2Hsu & Yu (2011) 模型簡介
2.2.1 符號與假設
2.2.2存貨模型圖
2.2.3成本分析

第三章考慮存貨重疊機制與數量折扣下之不良品可立即退貨的整合存貨模型
3.1 符號與假設
3.2模式推導

第四章數值範例

第五章結論與未來研究方向
5.1結論
5.2 未來研究方向

參考文獻


1.Abad, P. L., 2001, “Optimal price and order size for a reseller under partial backordering”, Computer and Operations Research, 28(1), pp. 53-65.

2.Banerjee, A., 1986, “A joint economic lot size model for purchaser and vendor”, Decision Sciences, 17(3), pp. 292-311.

3.Billington, P. J., 1987, “The classic economic production quantity model with setup costs as function of capital expenditure”, Decision Sciences, 18(1), pp. 25-42.

4.Brill, P. H. and Chaouch, B. A., 1995, “An EOQ model with random variations in demand”, Management Science, 41(5), pp. 927-936.

5.Chang, H. C., 2004, “An application of fuzzy sets theory to the EOQ model with imperfect quality items”, Computers and Operations Research, 31(12), pp. 2079-2092.

6.Chang, H. C., 2011, “A comprehensive note on:Aneconomic order quantity with imperfect quality and quantity discounts”, Applied MathmaticalModelling, 35(10), pp. 5208-5216.

7.Chung, C. J. and Wee, H. M., 2008, “An integrated production-inventory deteriorating model for pricing policy considering imperfect production, inspection planning and warranty-period and stock-level-dependant demand”, International Journal of Systems Science, 39(8), pp. 823-837.

8.Chung, K. J., 2008, “A necessary and sufficient condition for the existence of the optimal solution of a single-vendor single-buyer integrated production-inventory model with process unreliability consideration”, International Journal Production Economics, 113(1), pp. 269-274.

9.Darwish, M. A., 2008, “EPQ models with varying setup cost”, International Journal of Production Economics, 113(1), pp. 297-306.

10.Eroglu, A. and Ozdemir, G., 2007, “An economic order quantity model with defective items and shortages”, International Journal of Production Economics, 106(2), pp. 544-549.

11.Giri, B. C. and Roy, B., 2013, “A vendor-buyer integrated production-inventorymodel with quantity discount and unequal sized shipments”, International Journal of Operational Research, 16(1), pp. 1-13.

12.Goyal, S. K., 1977, “An integrated inventory model for a single supplier-single customer problem”, International Journal of Production Research, 15(1), pp. 107-111.

13.Goyal, S. K., 1988, “A joint economic-lot-size model for purchaser and vendor: a comment”, Decision Sciences, 19(1), pp. 236-241.

14.Goyal, S. K., Hung, C. K. and Chen, K. C., 2003, “A simple integrated production policy of an imperfect item for vendor and buyer”, Production Planning and Control, 14(7), pp. 596-602.

15.Goyal, S. K. and Nebebe, F., 2000, “Determination of economic production shipment policy for a single-vendor-single-buyer system”, European Journal of Operation Research, 121(1), pp. 175-178.

16.Ha, D. and Kim, S. L., 1997, “Implementation of JIT Purchasing: An integrated approach”, Production Planning and Control, 8(2), pp. 152-157.

17.Harris, F. W., 1913, “How many parts to make at once”, The Magazine of Management, 10(2), pp. 135-136.

18.Hill, R. M., 1997, “The single-vendor single-buyer integrated production-inventory model with a generalised policy”, European Journal of Operation Research, 97(3), pp. 493-499.

19.Hsu, W. K., 2012, “Optimal inventory model with fuzzy perfective rate, demand rate, and purchasing cost under immediate return for defective items”,ICIC international, 8(4), pp. 2583-2598.

20.Hsu, W. K. and Yu, H. F., 2011, “Economic Order Quality model with immediate return for defective items”, ICIC Express Letters, 5(7), pp. 2215-2220.

21.Huang, C. K., 2002, “An integrated vendor-buyer cooperative inventory model for items with imperfect quality”, Production Planning and Control, 13(4), pp. 355-361.

22.Huang, C. K., 2004, “An optimal policy for single-vendor single-buyer integrated production inventory problem with process unreliability consideration”, International Journal of Production Economics, 91(1), pp. 91-98.

23.Huang, C. K., Cheng, T. L.,Kao, T. C. and Goyal, S. K., 2011, “ An integrated inventory model inventory model involving manufacturing setup cost reduction in compound Poisson process”, International Journal of Production Research, 49(4), pp. 1219-1228.

24.Huang, Y. F., 2007, “Optimal retailer’s replenishment decisions in the EPQ model under two levels of trade credit policy”, European Journal of Operational Research, 176(3), pp. 1577-1591.

25.Jaber, M. Y.,Bonney, M. and Moualek, I., 2009, “An economic order quantity model for an imperfect production process with entropy cost”, International Journal of Production Economics, 118(1), pp. 26-33.

26.Jaber, M. Y.,Goyal, S. K. and Imran, M., 2008, “Economic production quantity model for items with imperfect quality subject to learning effects”, International Journal of Production Economics, 115, pp. 143-150.

27.Jong, J. F. and Wee, H. M., 2008, “A near optimal solution for integrated production inventory supplier-buyer deteriorating model considering JIT delivery batch”, International Journal of Computer Integrated Manufacturing, 21(3), pp. 289-300.

28.Kelle, P., Al-khateeb, F. and Miller, P. A., 2003, “Partnership and negotiation support by joint optimal ordering policies for JIT”, International Journal Production Economics, 81-82, pp. 431-441.

29.Konstantaras, I.,Goyal, S. K. and Papachristos, S., 2007, “Economic ordering policy for an item with imperfect quality subject to the in-house inspection”, Interational Journal of Systems Science, 38(6), pp. 473-482.

30.Kreng, B. W. and Wu, S. Y., 2000, “Implementing an optimal policy for set-up time reduction in an economic production quantity model”, Interational Journal of Systems Science, 31(5), pp. 605-612.

31.Lee, A. H., Kang, H. Y., Lai, C. M. and Hong, W. Y., 2013, “An integrated model for lot sizing with supplier selection and quantity discounts”, Applied Mathematical Modelling, 37(7), pp. 4733-4746.

32.Lee, S. D. and Yang, C. M., 2013, “An economic production quantity model with a positive resetup point under random demand”,Applied MathmaticalModelling, 37(5), pp.3340-3354.

33.Lee, H. W. and Yao, J. S., 1998, “Economic production quantity for fuzzy demand, and fuzzy production quantity”, European Journal of Operational Research, 109(1), pp. 203-211.

34.Lin, T. Y., 2010, “An economic order quantity with imperfect quality and quantity discounts”, Applied Mathmatical Modeling, 34(10), pp. 3158-3165.

35.Liu, J. J.and Yang, P., 1996, “Optimal lot-sizing in an imperfect production system with homogeneous reworkable jobs, European Journal of Operational Research, 91(3), pp. 517-527.

36.Maddah, B., Salameh, M. K. and Karame, G. M., 2009, “Lot sizing with random yield and different qualities”, Applied Mathematical Modelling, 33(4), pp. 1997-2009.

37.Maddah, B., Salameh, M. K. and Lama, M. H., 2010, “Order overlapping: A practical approach for preventing shortages during screening”, Computers and Industrial Engineering, 58(4), pp. 691-695.

38.Mehra, S.,Agrawal, S. P. and Rajagopalan, M., 1991, “Some comments on the validity of EOQ formula under inflationary conditions”, Decision Sciences, 22(1), pp. 206-212.

39.Moon, I. and Lee, S., 2000, “The effects of inflation and time-value of money on an economic order quantity with a random product life cycle”, European Journal of Operational Research, 125(3), pp. 588-601.

40.Ouyang, L. Y. and Chang, H. C., 2000, “Impact of investing in quality improvement on (Q, r, L) model involving the imperfect production process”, Production Planning and Control, 11(6), pp. 598-607.

41.Paknejad, M. J.,Nasri, F. and Affisco, J. F., 1995, “Defective units in a continuous review (s, Q) system”, International Journal of Production Research, 33(10), pp. 2767-2777.

42.Papachristos, S. and Konstantaras, I., 2006, “Economic ordering quantity models for items with imperfect quality”, International Journal of Production Economic, 100(1), pp. 148-154.

43.Porteus, E. L., 1986, “Optimal lot sizing, process quality improvement and setup cost reduction”, Operations Research, 34(1), pp. 137-144.

44.Rosenblatt, M. J. and Lee, H. L., 1986, “Economic production cycles with imperfect production process”, IIE Transactions, 18(1), pp. 48-55.

45.Salameh, M. K. and Jaber, M. Y., 2000, “Economic production quantity model for items with imperfect quality”, International Journal of Production Research, 64(3), pp. 59-64.

46.Sarker, B. R. and Kindi, M. A., 2006, “Optimal ordering policies in response to a discount offer”, International Journal of Production Economics, 100(2), pp. 195-211.

47.Schwaller, R. L., 1988, “EOQ under inspection costs”, Production and Inventory Management Joural, 29(3), pp. 22-24.

48.Tersine, R. J. andToelle, R. A., 1986, “Lot size determination with quantity discounts”, Production and inventory Management, 26(3), pp. 1-23.

49.Tripathy, P. K., Wee, W. M. and Majhi, P. R., 2003, “An EOQ model with process reliability considerations”, Joural of the Operation Research Society, 54(1), pp. 549-554.

50.Wahab, M. I. and Jaber, M. Y., 2010, “Economic order quantity model for items with imperfect quality, different holding costs, and learning effects: A note”, Computer and Industrial Engineering, 58(1), pp. 186-190.

51.Wee, H. M.,Yu, J., and Chen, M. C., 2007, “Optimal inventory model for items with imperfect quality and shortage backordering”,Omega, 35(1), pp. 7-11.

52.Weng, Z. K. and Wong, R. T., 1993, “General model for the supplier’s all-unit discount policy, Naval Research Logistics, 40(7), pp. 971-991.

53.Yu, H. F. and Hsu, W. K., 2012, “An EOQ model with immediate return for imperfect items under an announced price increase”, Journal of the Chinese Institite of Industrial Engineers, 29(1), pp. 30-42.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
系統版面圖檔 系統版面圖檔