臺灣博碩士論文加值系統

　　在無線通訊系統中，本地振盪源多以鎖相迴路為基礎的頻率合成器設計為主，而頻率合成器的頻譜純淨度乃是影響訊號品質的關鍵之一。由於振盪器容易受到訊號干擾的特性，將使得鎖相迴路的輸出頻譜在受到訊號注入情況下受到汙染。由於振盪器受訊號注入的影響是一種高度非線性的機制，在數學分析中往往需要配合特殊的假設才能更進一步導出結果；由此可知，注入干擾訊號對實際系統影響分析的困難度已不言而喻，這也使得設計者很難評估干擾訊號對系統所造成的影響。本論文旨在將傳統的注入鎖定方程式推廣為離散時域方程式，進而可以發展出一種基於電腦輔助設計軟體的注入鎖定振盪器模型，使注入訊號的影響可以借助電腦演算來完成。有別於現有文獻的方法，本論文使用波包模擬的觀念來實現注入鎖定振盪器的行為模型，在相同的準確性下能夠具有更好的模擬效率。本論文將此模型之演算結果與實際受注入的振盪器輸出頻譜進行比較，以確認此受注入影響振盪器模型之準確性。隨後，以鎖相迴路之鎖相振盪器為基礎，將所建立的注入鎖定振盪器模型套用於鎖相式自我注入鎖定架構之上並進行完整的模擬與量測結果比較。

　　In the wireless communication systems, the local oscillator (LO) is usually based on the phase-locked loop (PLL) in the transceiver to generate a carrier with purity. The spectral purity of the synthesized output is one of the reasons that affect the system output quality. Since the oscillator is susceptible to the interferences, the PLL output spectrum is subject to degradation due to external disturbances. It is difficult to analyze the oscillator under injection, because of the highly nonlinear mechanism, unless some particular conditions are restricted. This thesis has developed an injection-locked oscillator (ILO) model based on the discrete-time algorithm driven from the Adler’s equation. The developed ILO model can lead the designers to evaluate the influence of injection in a simple manner. In this study, the accuracy of the ILO model was experimentally examined. The model was finally applying itself to a 2.4 GHz phase- and self-injection-locked (PSIL) radar to predict the vital-sign sensing results.

摘 要 i
ABSTRACT ii
誌 謝 iii
目 錄 iv
表目錄 vi
圖目錄 vii
第一章 序論 1
1.1 簡介 1
1.2 研究動機 2
1.3 章節規劃 2
第二章 振盪器注入鎖定與頻率牽引現象 4
2.1 歷史沿革 4
2.2 弱注入分析 5
2.2.1 穩定的條件 9
2.2.2 同頻的現象 10
2.2.3 鎖定範圍內的現象 11
2.2.4 鎖定範圍外的現象 13
2.2.4.1 準鎖定(quasi-lock) 14
2.2.4.2 快速跳動(fast beat) 17
2.3 強注入分析 17
第三章 受注入影響之振盪器模擬平台建立 21
3.1 離散時域模型 21
3.2 電路波包模擬原理 23
3.3 SDD與FDD 26
3.4 ADS模擬平台建立 28
3.5 受注入之振盪器模擬與實驗 29
第四章 受注入影響之鎖相迴路模擬平台建立 36
4.1 受注入之鎖相迴路理論分析 36
4.1.1 離散時域方法 37
4.1.2 頻域方法 38
4.1.2.1 注入轉移函數 39
4.1.2.2 ILO的雜訊轉移函數 40
4.1.2.3 PLO的雜訊轉移函數 42
4.2 ADS模擬平台建立 43
4.3 受注入之鎖相迴路模擬與實驗 46
第五章 結論 55
參考文獻 56

[1] C.-J. Li, C.-H. Hsiao, F.-K. Wang, T.-S. Hong, and K.-C, Peng, “A rigorous analysis of a phase-locked oscillator under injection,” IEEE Trans. Microw. Theory Tech., vol. 58. no. 5, pp. 1391–1400, May 2010.
[2] R. Adler, “A study of locking phenomena in oscillator,” Proc. IRE, vol. 34, no. 6, pp. 351–357, June 1946.
[3] B. Razavi, “Challenges in portable RF transceiver design,” IEEE Circuits Devices Mag., vol. 12, no. 5, pp. 12–25, Sep. 1996.
[4] B. Razavi, “RF transmitter architectures and circuits,” in Proc. IEEE Custom Integr. Circuits Conf., San Diego, CA, 1999, pp. 197–204.
[5] C.-J. Li, “Research on Digitally Predistorted Power Amplifier and Injection-Pulled Oscillator for Wireless Communication System,” Ph. D. dissertation, Dept. Elect. Eng., National Sun Yat-Sen Univ., Kaohsiung, Taiwan, 2009.
[6] P.-H. Wu, J.-K. Jau, C.-J. Li, T.-S. Hong, and P. Hsu, “Phase- and self-injection-locked radar for detecting vital signs with efficient elimination of dc offsets and null points,” IEEE Trans. Microw. Theory Tech., vol. 61, no. 1, pp. 685–695, Jan. 2013.
[7] A. E. Sieman, Lasers, CA: University Science Books, 1986
[8] R. R. Ward, The Living Clocks, New York: Alfred Knopf, 1971
[9] B. Van der pol, “Forced oscillations in a circuit with nonlinear resistance,” Phil. Msg., vol. 3, pp. 65–80, Jan. 1927.
[10] R. C. Mackey, “Injection locking of klystron oscillators,” I.R.E Trans. Microw. Theory and Tech., vol. MTT-10, no. 4, pp. 228–235, July 1962.
[11] L. J. Paciorek, “Injection locking of oscillators,” Proc. IEEE, vol. 53, no. 11, pp. 1723–1727, Nov. 1965.
[12] K. Kurokawa, “Injection locking of microwave solid-state oscillators,” Proc. IEEE, vol. 61, no. 10, pp. 1386–1410, Oct. 1973.
[13] B. Razavi, “A study of injection locking and pulling in oscillators,” IEEE J. Solid-State Circuits, vol. 39, no. 9, pp. 1415–1424, Sep. 2004.
[14] A. Mirzaei, M. E. Heidari, and A. A. Abidi, “Analysis of oscillators locked by large injection signals: Generalized Adler’s equation and geometrical interpretation,” in Proc. IEEE Custom Integr. Circuits Conf., San Jose, CA, 2006, pp. 737–740.
[15] M. E. Heidari and A. A. Abidi, “Behavioral models of frequency pulling in oscillators,” in Proc. IEEE Int. Behav. Model. SimulationWorkshop, San Jose, CA, 2007, pp. 100–104.
[16] X. Lai and J. Roychowdhury, “Capturing oscillator injection locking via nonlinear phase-domain macromodels,” IEEE Trans. Microw.Theory Tech., vol. 52, no. 9, pp. 2251–2261, Sep. 2004.
[17] X. Lai and J. Roychowdhury, “Automated oscillator macromodelling techniques for capturing amplitude variations and injection locking,” in Proc. IEEE/ACM Int. Comput.-Aided Design Conf., San Jose, CA, 2004, pp. 687–694.
[18] P. Maffezzoni and D. D’Amore, “Evaluating pulling effects in oscillators due to small-signal injection,” IEEE Trans. Comput.-Aided Design Integr. Circuits Syst., vol. 28, no. 1, pp. 22–31, Jan. 2009.
[19] C.-J. Li, C.-H. Hsiao, F.-K. Wang, T.-S. Horng, and K.-C. Peng, “A rigorous analysis of local oscillators pulling in frequency and discretetime domain,” in Proc. IEEE Radio Freq. Integr. Circuits Symp. Dig., 2009, pp. 409–412.
[20] H. R. Rategh and T. H. Lee, “Superharmonic injection-locked frequency dividers,” IEEE J. Solid-State Circuits, vol. 34, pp. 813–821, Sep. 1999.
[21] Thomas Finateu, Jean-Baptiste Begueret, Yann Deval and Franck Badets, “Injection locked oscillator based RF transmitters,” in Proc. Design and Test of Integrated Systems in Nanoscale Technology Conf., 2006, pp. 6–9.
[22] C.-J. Li, F.-K. Wang, T.-S. Hong, and K.-C, Peng, “A novel RF sensing circuit using injection locking and frequency demodulation for cognitive radio applications,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 12, pp. 3143–3152, Dec. 2009.
[23] F.-K. Wang, C.-J. Li, C.-H. Hsiao, T.-S. Horng, J. Lin, K.-C. Peng, J.-K. Jau, J.-Y. Li, and C.-C. Chen, “An injection-locked detector for concurrent spectrum and vital sign sensing,” in IEEE MTT-S Int. Microw. Symp. Dig., May 2010, pp. 768-771.
[24] F.-K. Wang, C.-J. Li, C.-H. Hsiao, T.-S. Hong, J. Lin, K.-C, Peng, J.-K. Jau, J.-Y. Li, and C.-C. Chen, “A novel vital-sign sensor based on a self-injection-locked oscillator,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 4112–4120, Dec. 2010.
[25] F.-K. Wang, T.-S. Hong, K.-C, Peng, J.-K. Jau, J.-Y. Li, and C.-C. Chen, “Single-antenna doppler radars using self and mutual injection locking for vital sign detection with random body movement cancellation,” IEEE Trans. Microw. Theory Tech., vol. 59. no. 12, pp. 3577–3587, Dec. 2011.
[26] A. V. Oppenheim, R. W. Schafer, and J. R. Buck, Discrete-Time Signal Processing, 2nd ed. Upper Saddle River, NJ: Prentice Hall, 1999.
[27] “Agilent EEsoft ADS’s Manual,” Agilent Technologies, Inc.
[28] R. E. Best, Phase-Locked Loops: Theory, Design, and Applications, 2nd ed. New York: McGraw-Hill, 1993.
[29] 羅正斌，頻率合成器之分數式架構非線性效應研究與混合訊號IC實現，國立中山大學電機工程研究所碩士論文，2006。
[30] 蕭介勛，本地振盪源的注入鎖定與牽引現象研究，國立中山大學電機工程研究所碩士論文，2008。
[31] T. Sugiura and S. Sugimoto, “FM noise reduction of Gunn-effect oscillators by injection locking,” Proc. IEEE, vol. 57, no. 1, pp. 77–78, Jan. 1969.
[32] M. E. Hines, J. R. Collinet, and J. G. Ondria, “FM noise suppression of an injection phase-locked oscillator,” IEEE Trans. Microw. Theory Tech., vol. MTT-16, no. 9, pp. 738–742, Sep. 1968.