跳到主要內容

臺灣博碩士論文加值系統

(100.28.2.72) 您好!臺灣時間:2024/06/13 12:19
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:鄭志先
研究生(外文):Chih-Hsieh Cheng
論文名稱:利用逆向工程技術於滾筒式割草機螺旋刀片之研究
論文名稱(外文):Study on the Reel Mower Helical Blades by Reverse Engineering Technique
指導教授:邱永川邱永川引用關係楊仁岡
指導教授(外文):Yung -Chuna ChiouJen -Kang Yang
學位類別:碩士
校院名稱:國立嘉義大學
系所名稱:生物機電工程學系研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
畢業學年度:102
語文別:中文
論文頁數:71
中文關鍵詞:滾筒式螺旋刀片逆向工程藍光LED
外文關鍵詞:reel mower helical bladesreverse engineeringblue LED
相關次數:
  • 被引用被引用:1
  • 點閱點閱:313
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本研究運用逆向工程技術於滾筒式割草機刀片,使用非接觸式測量設備Steinbichler COMET L3D藍光掃描儀及套裝軟體COMET plus以擷取焊接於像剪刀式剪切作用之旋轉滾筒式割草機3~9片刀片組之數位資料。在實驗中先取得刀片的數據後,才於開發平台中使用有限元素分析動態仿真模擬軟體DEFORM-3D及滾輪函工技術製作出與原本的物件相似的工件。並運用Geomagic Studio逆向工程軟體中點雲資料的最佳擬合與精確曲面的偏差分析的凾能,和原本的物件進行誤差比對,來驗證於開發平開中運用逆向工程技術的工件是否在容許誤差範圍內。實驗結果顯示本研究方法提供了一組較佳的組合,其誤差值是在可接受的範圍之內。
This study applied the reverse engineering technique to reel mower helical blades and utilized Steinbichler COMET L3D blue-LED scanner and COMET plus software to acquire the digital data of reel or cylinder mower blades composed of three to nine helical blades welded in an horizontally rotating cylindrical reel, creating a scissor-like cutting action. The blades data was obtained from experiments and the finite element analysis software DEFORM-3D and roller manufacture technique were applied to the objects similar to the original design by development platform processing technology. The comparison and analysis were accomplished by Geomagic Studio software in order to analyze the error between the helical blade design and manufacture. The experimental results revealed that this research method provided a set of better fit results within the allowable tolerance.
摘要 I
Abstract I
誌謝 II
目錄 III
表目錄 V
圖目錄 VI
第一章 前言 1
1.1 研究背景 1
1.2 研究動機 3
1.3 研究目的 4
第二章 文獻探討 5
第三章 材料與方法 12
3.1 試驗材料 12
3.2 實驗設備 12
3.3點資料處理軟體 - COMET plus 13
3.4有限元素分析模擬軟體 – Deform 3D 14
3.5實驗方法 14
3.6 點資料擷取技術 16
3.7測量數據格式轉換 17
3.8實驗步驟 18
第四章 結果與討論 35
4.1刀片的誤差比對分析 35
4.2點資料的處理 35
4.3 誤差比對分析 36
4.4 實驗結果 41
第五章 結論與建議 67
5.1 結論 67
5.2 建議 68
參考文獻 69
1. 史雷。2000。產品開發的未來趨勢 - 逆向工程與快速原型系統,機械月刊 26(4):337-347。
2. 金濤、童永光。2005。逆向工程技術。初版,79-88。台北:新文京。
3. 許耀仁。2002。田口方法在逆向工程之CAD模型重建及製造最佳化參數設計。碩士論文。雲林:國立雲林科技大學機械工程系研究所。
4. 許調明。2006。應用逆向工程與模糊理論於參數畫產品造型之研究。碩士論文。台南:國立成功大學工業設計學系研究所。
5. 劉昶亨。2003。應用逆向工程技術於椰子水體積估測之研究。碩士論文。嘉義:國立嘉義大學生物機電系研究所。
6. 鄭銘凱。2010。逆向工程及機械工程設計技術的整合與應用。碩士論文。彰化:大葉大學機械與自動化工程學系研究所。
7. 蘇治平。2006。三維影像之光學掃描量測系統。碩士論文。嘉義:國立中正大學機械工程學系研究所。
8. Bernarda Alain, A. Fischerb, 2002, ‟New Trends in Rapid Product Development”, IRCCyN(Institut de Recherche en Communications et Cybernetique de Nantes)Industrial Engineering Research Project, CIRP Annals - Manufacturing Technology Volume 51, Pages 635-652.
9. D. T. Pham, S. S. Dimov. “Rapid manufacturing. Berlin: Springer. ” 2001. ISBN 1-85233-360-X.
10. Drenik, Miha, Kampel, M. 2008. ‟An evaluation of low cost scanning versus industrial 3D scanning devices”, Faculty of Computer and Information Science, University of LjubljanaTrˇzaˇska cesta 25, SI-1001 Ljubljana, Slovenija, Image and Signal Processing, 2008. CISP '08. Congress on (Volume: 3 ), Pages 756-760.
11. Feng Hsi-Yung,*, Yixin Liua, Fengfeng Xi, 2001, ‟Analysis of digitizing errors of a laser scanning system”, Journal of the International Societies for Precisi on Engineering and Nanotechnology page 185-191.
12. Cho Hyunjoong, Gracious Ngaile, and Taylan Altan, 2004, ‟Optimization of mechanical crimping to assemble tubular components”, Journal of Materials Processing Technology, Pages 35-43.
13. Min Jie, Haisheng Wang, Zhiming Wu , Jiang Li, Qing Han and Wenbin Zhang,2012, ‟ The Numerical Simulation for Compaction of Loose Defects of Large Forgings with DEFORM”, Engineering College, Honghe University, Industrial Control and Electronics Engineering (ICICEE), Pages 384-387.
14. LID Xiang-hua,2011, ‟Prospects for Variable Gauge Rolling: Technology Theory and Application”,Northeastern University, Shenyang 110004, Liaoning, China,Journal of Iron and Steel Research, International Volume 18, Issue 1, January 2011, Pages 1–7
15. Korosec Marjan , Joze Duhovnik, Nikola Vukasinovic, 2010, ‟ Identification and optimization of key process parameters in noncontact laser scanning for reverse engineering”, Laboratory for Computer Aided Design &; Manufacturing -Lecad,Faculty of Mechanical Engineering Ljubljana, Slovenia, Computer-Aided Design 42, 744-748.
16. Paulic Matej, Tomaz Irgolic, Joze Balic, Franc Cus, Andrej Cupar, Tomaz Brajlih,Igor Drstvensek, 2014, ‟ Reverse Engineering of Parts with Optical Scanning and Additive Manufacturing”, Faculty of mechanical engineering, University of Maribor,Smetanova ulica 17, 2000 Maribor, Slovenia, 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, Pages 795-803.
17. Liu Meiqing, Yaohua Bai, Qiuwei Li, Zhiyong Liu, Qi Lin, 2010, ‟ Three-dimensional Reverse Engineering Modeling and Numerical Simulation of Pump Based on Laser Scanning Technology”, School of Power &; Mechanical Engineering Wuhan University, E-Product E-Service and E-Entertainment (ICEEE),International Conference on, Pages 1-4.
18. Peng QingJin, Martin Loftus, 1998, ‟A new approach to reverse engineering based on vision information”, School of Manufacturing and Mechanical Engineering, University of Birmingham, Birmingham B15 2TT, UK, International Journal of Machine Tools and Manufacture Volume 38, Issue 8, Pages 881-899.
19. Peng Qingjin, Martin Loftus, 2001, ‟ Using image processing based on neural networks in reverse engineering”, Department of Mechanical and Industrial Engineering, School of Manufacturing and Mechanical Engineering, University of Birmingham, Birmingham B15 2TT, UK, International Journal of Machine Tools &; Manufacture 625-640.
20. Pham1D.T,K.D Dotchev1,S.S Dimov1,A.I Ivanov1,2001, ‟Accuracy issues in rapid manufacturing CastForm™ patterns”, Manufacturing Engineering Centre, Cardiff University, Cardiff, UK, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture January 1, 2007 vol. 221 no. 1 53-67.
21. Jang Roma, Chu-Shik Kang, Jong-Ahn Kim, Jae Wan Kim,Jae-Eun Kim, and Hae Yong Park, 2010, ‟High-speed measurement of three-dimensional surface profiles up to 10 μm using two-wavelength phase-shifting interferometry utilizing”, Department of Physics, KAIST, 373-1 Guseong-Dong, Yuseong-Gu,Daejeon 305-701, South Korea an injection locking technique, Applied Optics, Vol. 50, Issue 11, pp. 1541-1547.
22. Guo Ruipeng,∗, Zhengsu Tao, 2013, ‟ A study of neural network for surface characteristics in-process optical measurement”, College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing, Jiangsu Prov. 210016, People’s Republic of China, Contents lists available at SciVerse ScienceDirect, pages 2821- 2824.
23. Hsiao Shih-Wen and Jiun-Chau Chuang, 2003, ‟A reverse engineering based approach for product form design” Department of Industrial Design, National Cheng Kung University, Tainan, Taiwan, Volume 24, Issue 2, Pages 155-171.
連結至畢業學校之論文網頁點我開啟連結
註: 此連結為研究生畢業學校所提供,不一定有電子全文可供下載,若連結有誤,請點選上方之〝勘誤回報〞功能,我們會盡快修正,謝謝!
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top