跳到主要內容

臺灣博碩士論文加值系統

(3.235.60.144) 您好!臺灣時間:2021/07/27 01:14
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:陳冠樺
研究生(外文):Kuan-Hua Chen
論文名稱:無線式手機電能對充技術
論文名稱(外文):Wireless Charging Method between Two Mobile Phones
指導教授:林俊良林俊良引用關係
口試委員:許耿禎林昱成
口試日期:2015-07-31
學位類別:碩士
校院名稱:國立中興大學
系所名稱:電機工程學系所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2015
畢業學年度:103
語文別:中文
論文頁數:43
中文關鍵詞:無線式手機電能對充技術手機無線充電手機對手機充電
外文關鍵詞:Wireless Charging Method Between Two Mobile PhonesWireless chargeWireless Charge between Mobile Phones
相關次數:
  • 被引用被引用:0
  • 點閱點閱:120
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本論文提供無線式手機電能對充技術,使用震盪器將供電端手機之直流電源轉換成交流電源,透過非接觸式感應原理使交流電源經供電端線圈耦合至受電端線圈,再經過交直流轉換裝置後使受電端手機達到充電的目的。技術提供之目的是為增加其中一支手機待機時的情況,當四周環境無法提供任何充電裝置可補充其電量時,則可藉由其它手機透過此技術進行手機對手機無線式電量轉移來達成手機電量之補充。由於不須導線,故可大幅提昇便利性。

This thesis proposes a wireless charging method between two mobile phones. It adopts an oscillator in the supplying side converting its DC power from the embedded battery to AC power, a contactless interface consists of a coil induces magnetic effect in the accepting side which also equips with a contactless interface with a coil to induce AC power from the supplying side. The AC power is then regulated and converted to DC power, after passing through a voltage booster, to charge the embedded battery in the accepting side. The purpose is to extend durability of the mobile phone’s battery by conveniently accepting extra power supplied from other mobile phones around without resorting to any wired connections. Convenience is significantly enhanced when compared with other existing inventions which rely solely on the wired connections.

誌 謝 i
中文摘要 ii
英文摘要 iii
目 錄 iv
表 目 錄 vi
圖 目 錄 vii
第1章 緒論 1
1.1 研究背景與動機 1
1.2 文獻回顧 1
1.3 研究目的 2
1.4 本論文的貢獻 2
1.5 論文架構 3
第2章 無線式手機電能對充系統 4
2.1 系統架構與裝置組成說明 4
2.2 系統控制與動作說明 6
2.3 充電與放電動作流程 8
第3章 無線式手機電能對充系統設計 10
3.1 裝置電路結構 10
3.2 感應耦合電路原理分析 11
3.2.1 變壓器的感應耦合 11
3.2.2 諧振電路 15
3.3 電力切換電路說明 18
3.4 升壓轉換器說明 20
3.5 降壓轉換器說明 22
3.6 控制器說明 25
3.7 儲能裝置說明 27
3.8 無線式手機電能對充系統電路設計 27
第4章 無線式手機電能對充系統實作與分析 31
4.1 硬體電路製作 31
4.2 電路實作之測試與量測 32
4.2.1 實驗一:供電端為電源供應器,受電端為電阻之實測 32
4.2.2 實驗二:供電端為手機,受電端亦為手機之實測 33
4.3 充/放電過程實測 35
4.4 線圈耦合距離實測 38
第5章 結論與未來研究方向 40
5.1 結論 40
5.2 未來研究方向 40
參考文獻 41


[1]Cheney, M. 1998. Tesla: Man Out of Time. American: Amereon Ltd.
[2]Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., and Nakao, F. 1999. “Large air-gap coupler for inductive charger.” Information Processing and Management 35(5): 3526-3528. doi: 10.1109/20.800578.
[3]Divan, D. 1996. “Low stress switching for efficiency.” Information Processing and Management 33(12): 33-39. doi: 10.1109/6.546497.
[4]Kim, C.G., and Cho, B.H. 1996. “Transcutaneous energy transmission with double tuned duty cycle control.”In IEEE Energy Conversion Engineering Conference, Washington, DC, 11-16 Aug 1996:587-591. Washington, DC: IEEE.
[5]Abe, H., Sakamoto, H., and Harada, K. 2000. “A noncontact charger using a resonant converter with parallel capacitor of the secondary coil.” Information Processing and Management 36(2): 444-451. doi: 10.1109/28.833760.
[6]Sakamoto, H., and Harada, K. 1992. “A novel circuit for non-contact charging through electro-magnetic coupling.”In IEEE A novel circuit for non-contact charging through electro-magnetic coupling, Toledo, 29 Jun 1992-03 Jul 1992:168-174. Toledo: IEEE.
[7]Hirai, J., Tae-Woong Kim, and Kawamura, A. 2000. “Study on Intellignet Battery Charging Using Inductive Transmission of Power and Information.” Information Processing and Management 15(2): 335-345. doi: 10.1109/63.838106.
[8]Hiraga, Y., Hirai, J., Kaku, Y., Nitta, Y., Kawamura, A., and Ishioka, K. 1994. “Decentralized control of machines with the use of inductive transmission of power and signal.”In IEEE Industry Applications Society Annual Meeting, Denver, CO, 02-06 Oct 1994:875-881. Denver, CO: IEEE.
[9]Knoepfel, H. E. 2000. Magnetic Fields: A Comprehensive Theoretical Treatise for Practical Use. American: John Wiley & Sons Inc.
[10]Edward, P. F. 2001. Permanent Magnet and Electromechanical Devices: Materials, Analysis and Applications. American: Academic Pr.
[11]Jiang, H. J., and Maggetto, G. 1997. “Assessment of the impact of transformer coupling quality on steady state characteristics of series resonant converters.”In IEEE Power Electronics Specialists Conference, St. Louis, MO, 22-27 Jun 1997:1186-119. St. Louis, MO: IEEE.
[12]O''Sullivan, D. Willers, M., Egan, M.G., Hayes, J.G., Nguyen, P.T., and Henze, C.P. 2000. “Power-factor-corrected single-stage inductive charger for electric-vehicle batteries.”In IEEE Power Electronics Specialists Conference, Galway, 18-23 Jun 2000:509-516. Galway: IEEE.
[13]Hayes, J.G., and Egan, M.G. 1999. “A comparative study of phase-shift, frequency, and hybrid control of the series resonant converter supplying the electric vehicle inductive charging interface.”In IEEE Applied Power Electronics Conference and Exposition, Dallas, TX, 14-18 Mar 1999:450-457. Dallas, TX: IEEE.
[14]Hua, G., Yang, E.X., Yimin Jiang, and Lee, F.C. 1994. “Novel zero-current-transition PWM converters.” Information Processing and Management 9(6): 601-606. doi: 10.1109/63.334775.
[15]Ghahary, A., and Cho, B.H. 1990. “Design of a transcutaneous energy transmission system using a series resonant converter.”In IEEE Power Electronics Specialists Conference, San Antonio, TX, USA, 11-14 Jun 1990:1-8. San Antonio, TX, USA: IEEE.
[16]Hayes, J.G., Hall, J.T., Egan, M.G., and Murphy, John M.D. 1990. “Full-bridge, series-resonant converter supplying the SAE J-1773 electric vehicle inductive charging interface.”In IEEE Power Electronics Specialists Conference, Baveno, 23-27 Jun 1996:1913-1918. Baveno: IEEE.
[17]林欽裕,2011,電路學,台北:五南圖書出版股份有限公司。
[18]葉英杰,2013,「非接觸式雙向充放電裝置應用於集合式住宅之停車系統」,碩士論文,國立中興大學,台中。
[19]Chwei-Sen Wang, Covic, G.A., and Stielau, O.H. 2004. “Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems.” Information Processing and Management 51(1): 148-157. doi: 10.1109/TIE.2003.822038.
[20]NE555 Data Sheet. Fairchild Semiconductor Corporation, 2002.
[21]TPS61085 Data Sheet.Texas Instruments Inc, 2008.
[22]LM78L05 Data Sheet.Texas Instruments Inc, 2013.


QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top