(44.192.10.166) 您好!臺灣時間:2021/03/06 04:31
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果

詳目顯示:::

我願授權國圖
: 
twitterline
研究生:雅娜妮
研究生(外文):Nani Kurniati
論文名稱:具有保固之生產機台的檢驗與維修策略
論文名稱(外文):Inspection and Maintenance Policy for Manufacturing Facilities with Warranty
指導教授:吳建瑋吳建瑋引用關係葉瑞徽葉瑞徽引用關係
指導教授(外文):Chien-Wei WuRuey-Huei Yeh
口試委員:吳建瑋葉瑞徽
口試委員(外文):Chien-Wei WuRuey-Huei Yeh
口試日期:2015-01-09
學位類別:博士
校院名稱:國立臺灣科技大學
系所名稱:工業管理系
學門:商業及管理學門
學類:其他商業及管理學類
論文種類:學術論文
論文出版年:2015
畢業學年度:103
語文別:英文
論文頁數:68
中文關鍵詞:產線系統驗收抽樣製程能力指數維修策略免費維修保固
外文關鍵詞:Production systemacceptance samplingprocess capability indicesmaintenance policyfree repair warranty
相關次數:
  • 被引用被引用:0
  • 點閱點閱:110
  • 評分評分:系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
產線製造之產品通常具有數項品質特徵。為驗證產品的一致性符合需求,品質管制與檢驗在製造程序中之重要性不言可喻。而製造產品之品質或有變化,一套可適時呈現此一變化之檢驗技術變的不可或缺。此外,產線設備之維修在實質上係用以維持生產效能。這是由於產線設備會隨時間老化與退化,從而影響產品品質。因此產線設備之維護策略可定義為特定情況下之總成本,並合理推定維護完善的產線設備可確保高品質之產品。環顧學術文獻,已分別將產品檢驗與產線維修之角色與優勢完整呈現,並建議後續應著眼於瞭解兩者之關連性如:藉此建立較佳之品質保證及生產效能之產品製造系統。然而,前述兩者(產品檢驗與產線維修)之鏈結並未有充分的學術研究。因此,本論文首先試圖研提結合產品檢驗計畫與產線設備維護策略之鏈結,並以產線管理觀點研提綜合管理思考架構。此一鏈結產線維護與產品品質之架構,可於未來研究中提供有效的最佳化模型。
Manufacturing product exhibits several quality characteristics. Quality control and inspection within manufacturing process are crucial to verify product conformance to requirements. The quality history of the product may change; therefore, an inspection technique that can accommodate the changes in product quality becomes increasingly indispensable. In addition, maintenance of manufacturing equipment is substantial to preserve production performance. The equipment may age and deteriorate with time and production, thus affecting product quality. Hence, maintenance policy for equipment define under certain circumstance based on total cost incurs. Well-maintained equipment ensures the high-quality products. The role and advantage of inspection and maintenance were individually well addressed in literatures. The proceeding observations, both on them, suggest realizing their relationship, as such a way as to establish better quality assurance and the performance of a production system. However, the link between these two aspects has not been sufficiently investigated. Hence, this thesis attempts to firstly propose the inspection plan for quality product and maintenance policy for equipment, independently. Moreover, a broad framework of interaction between inspection and maintenance is proposed to offer comprehensive managerial thinking in equipment management. While two kinds of connections are suggested: first, from the maintenance side and second, from the quality side, which provide useful initiation of possible joint optimization model for future research.
Cover page
摘 要
Abstract
Acknowledgement
Table of Contents
List of Tables
List of Figures
Chapter 1 Introduction
1.1 Motivation
1.2 Research Objectives
1.3 Organization
Chapter 2 Literature Review
2.1 Inspection Techniques and Acceptance Sampling
2.2 Process Capability Indices (PCIs)
2.3 Maintenance Management
2.4 Warranty Analysis
2.5 Joint Discussion between Quality, Maintenance, and Warranty
Chapter 3 Variables Tightened-Normal-Tightened (TNT) Sampling Scheme
3.1 Motivation of TNT Sampling Scheme
3.2 Development of TNT scheme for one-sided specification limit
3.3 Result and Discussion of TNT Sampling System
3.4 Numerical example of TNT Sampling System
Chapter 4 Replacement Policy with Free-Repair Warranty
4.1 Model formulation
4.2 Numerical example and analysis
Chapter 5 Conclusions and Future Research
5.1 Conclusions
5.2 Future research
References
Aslam, M., and Jun. C. H. (2009). A Group Acceptance Sampling Plan for Truncated Life Test Having Weibull Distribution. Journal of Applied Statistics 36, pp. 1021–27.

Aslam, M., Wu, C. W., Azam, M, and Jun, C. H. (2013). Variable Sampling Inspection for Resubmitted Lots Based on Process Capability Index Cpk for Normally Distributed Items. Applied Mathematical Modelling 37, pp. 667–75.

Baillie, D. H. (1992). Double Sampling Plans for Inspection by Variables When The Process Standard Deviation is Unknown. International Journal of Quality and Reliability Management 9, pp. 59–70.

Balamurali, S., and Jun, C. H. (2007). Multiple Dependent State Sampling Plans for Lot Acceptance Based on Measurement Data. European Journal of Operational Research 180, pp. 1221–30.

Barlow, R. E., Hunter, L. C., (1960). Optimum Preventive Maintenance Policies. Operations Research 8, pp. 90–100.

Bender, A. Jr., (1975). Sampling by Variables to Control The Fraction Defective: Part II. Journal of Quality Technology 7, pp. 139–43.

Beidenweg, F. M. (1981). Warranty Policies: Consumer Value vs Manufacturing Costs. Doctoral dissertation, Stanford University, Stanford, USA.

Besterfield, D. H. (2009). Quality Control, eigth ed., Prentice Hall, NJ.

Blischke, W. R. (1990). Mathematical Models for Warranty Cost Analysis. Mathematical Computation Model 13, pp. 1–16.

Blischke, W. R., and Murthy, D. N. P. (1991). Product Warranty Management I: A Taxonomy for Warranty Policies. European Journal Operation Research 62, pp. 127–48.

Blischke, W. R., and Murthy, D. N. P. (1994). Warranty Cost Analysis, second ed., Marcel Dekker, NY.

Blischke, W. R., and Murthy, D. N. P. (1996). Product Warranty Handbook, second ed., Marcel Dekker, NY.

Boland, B. J., and Proschan, F. (1982). Periodic Replacement with Increasing Minimal Repair Cost at Failure. Operations Research 30, pp. 1183–190.

Boyles, R. A. (1991). The Taguchi Capability Index. Journal of Quality Technology 23, pp. 17–26.

Bravo, P. C., and Wetherill, G. B. (1980). The Matching of Sampling Plans and The Design of Double Sampling Plans. Journal of the Royal Statistical Society 143, pp. 49–67.

Brennan, J.R. (1994). Warranties: Planning, Analysis, and Implementation, second ed, McGraw-Hill, NY.

Bruhn-Suhr, M., Krumbholz, W., and Lenz, H.-J. (1992). On The Design of Exact Single Sampling Plans by Variables. In: Frontiers in Statistical Quality Control 4, pp.83–90, Lenz, H.-J. et al. eds., Physica Verlag, Heidelberg.

Calvin, T. .W. (1977). TNT Zero Acceptance Number Sampling. Transaction of the American Society for Quality Control, Annual Technical Conference, Philadelphia, PA, pp. 35–39.

Chan, L. K., Cheng, S. W., and Spiring, F.A. (1988). A New Measure of Process Capability Cpm. Journal of Quality Technology 20, pp. 162–75.

Chattopadhyay, G. N., and Murthy, D. N. P. (2000). Warranties for Secondhand Products. Mathematical and Computer Modeling 31, pp. 81–6.

Chattopadhyay, G. N., and Murthy, D. N. P. (2001). Cost Sharing Warranty Policies for Second-hand Products. International Transactions in Operational Research 8, pp. 47–60.

Chen, J. W., Li, K. H., and Lam, Y. (2007). Bayesian Single and Double Variable Sampling Plans for The Weibull Distribution with Censoring. European Journal of Operational Research 177, pp. 1062–73.

Chou, Y. M., and Owen, D. B., (1989). On the Distributions of the Estimated Process Capability Indices. Communications in Statistics–Theory and Methods 18(12), pp. 4549–60.

Chukova, S., Dimitrov, B. N., and Rykov, V. V. (1993). Warranty Analysis. Journal of Soviet Mathematics 67(6), pp. 3486–508.

Chukova, S., and Johnston, M. R. (2006). Two-dimensional Warranty Strategy Based on Minimal and Complete Repairs. Mathematical and Computer Modeling 44, pp. 1133–43.

Chukova, S., and Shafiee, M. (2012). One-dimensional Warranty Cost Analysis for Second-hand Items: An Overview. International Journal of Quality & Reliability Management 30(3), pp. 239–55.

Chun, Y. H. (1992), Optimal Number of Periodic Preventive Maintenance Operations under Warranty. Reliability Engineering and System Safety 37, pp. 223–25.

Chun, Y. H. and Lee, C.S. (1994). Optimal Replacement Policy for Warranted System with Imperfect Preventive Maintenance Operations. Microelectronics Reliability 32, pp. 839–43.

Curtiss, J. H. (1947). Acceptance Sampling by Variables, with Special Reference to The Case in Which Quality is Measured by Average or Dispersion. Journal of Research of National Bureau of Standards 39, pp.271–90.

Dagpunar, J. S., and Jack, N. (1994). Preventive Maintenance Strategy for Equipment Under Warranty. Microelectronic Reliability 34, pp. 1089–93.

Das, N. G., and Mitra, S. K. (1964). The Effect of Non-Normality on Sampling Inspection. Sankhya 26A, p.169–176.

Daya, M. B., and Duffuaa, S. O. (1995). Maintenance and Quality: The Missing Link. Journal of Quality in Maintenance Engineering 1(1), pp. 20–26.

Djamaludin, I., Murthy, D. N. P., and Blischke, W. R. (1996). Bibliography on warranties. In Blischke, W.R., Murthy, D.N.P., editors. Product warranty handbook. Marcel Dekker, NY.

Dodge, H. F. (1965). Evaluation of Sampling Inspection System having Rules for Switching between Normal and Tightened Inspection. In Technical Report 14. Rutgers State University, The Statistics Center.

Evans, J. R., and Lindsay, W. M. (2002). The Management and Control of Quality, fifthed., South-Western Thomson Learning, Ohio.

Fernandez, A. J., Perez-Gonzalez, C. J., Aslam, M., and Jun, C.H. (2011). Design of Progressively Censored Group Sampling Plans for Weibull Distributions: An Optimization Problem. European Journal of Operational Research 211(3), pp. 525–532.

Finkelstein, M. S. (1992). Some Notes on Two Types of Minimal Repair. Advanced Applied Probability 24, pp. 226-28.

Finley, J. C. (1992). What is The Capability? Or what are Cp and Cpk . ASQC Quality Congress Ttransactions, Nashville, pp. 186–91.

Govindaraju, K., and Soundararajan, V. (1986). Selection of Single Sampling Plans for Variables Matching the MIL-STD-105 Scheme. Journal of Quality Technology 18, pp. 234–38.

Groover, M. P. (2008). Automation, Production Systems, and Computer-Integrated Manufacturing, third ed., Prentice Hall, NY.

Guenther, W.C. (1969). Use of The Binomial, Hypergeometric, and Poisson Tables to Obtain Sampling Plans. Journal of Quality Technology 1(2), pp. 105–9.

Hailey, W. A. (1980). Minimum Sample Size Single Sampling Plans: A Computerized Approach. Journal of Quality Technology 12 (4), pp. 230–35.

Hald, A., and Thyregod, P. (1965). The Composite Operating Characteristic under Normal and Tightened Sampling Inspection by Attributes. Bulletin of International Statistical Institute 41, pp. 517–29.

Hamaker, H. C. (1979). Acceptance Sampling for Percent Defective by Variables and by Attributes. Journal of Quality Technology 11, pp. 139–48.

Harry, M.J. (1988). The Nature of Six-Sigma Quality. Motorola University Press, Schaumburg, IL

Iskandar, B.P. (1992). Modeling and Analysis of Two-Dimensional Warranty Policies. Doctoral Dissertation, University of Queensland, Brisbane, Australia

Iskandar, B. P., Wilson, R. J., and Murthy, D. N. P. (1994). Two-dimensional combination warranty policies. RAIRO – Operations Research 28, pp. 57–75.

Iskandar, B. P., and Murthy, D. N. P. (2003). Repair-Replace Strategies for Two-Dimensional Warranty Policies. Mathematical and Computer Modelling 38, pp. 1233–41.

Iskandar, B. P., Murthy, D. N. P., Jack, N. (2005). A New Repair-Replace Strategy for Items Sold with A Two-Dimensional Warranty. Computer and Operations Research 32, pp. 669–82.

Jack, N., and Schouten, F. A. (2000). Optimal Repair–Replace Strategies for A Warranted Product. International Journal Production Economy 67, pp. 95–100.

Jack N, and Murthy, D. N. P. (2001). Servicing Strategies for Items Sold with Warranty. Journal of Operation Reseacrh 52, pp.1284–88.

Jack N, Iskandar, B. P., and Murthy, D. N. P. (2009). A Repair-Replace Strategy Based on Usage Rate for Items Sold with A Two-Dimensional Warranty. Reliability Engineering and System Safety 94, pp.611–17.

Jennett, W. J, and Welch, B. L. (1939). The Control of Proportion Defective as Judged by A Single Quality Characteristic Varying on A Continuous Scale. Journal of the Royal Statistical Society 6(B), pp. 80–8.

Jun, C. H., Lee, H., Lee, S. H., and Balamurali, S. (2010). A Variables Repetitive Group Sampling Plan under Failure-censored Reliability Tests for
Weibull Distribution. Journal of Applied Statistics 37 (3), pp. 453–60.

Juran, J. M. (1999). Quality Control Handbook, fifth ed., McGraw-Hill, NY.
Kane, V. E. (1986). Process Capability Indices. Journal of Quality Technology18(1), pp. 41–52.

Kao, J. H. K. (1971). MIL-STD-414: Sampling Procedures and Tables for Inspection By Variables For Percent Defective. Journal of Quality Technology 3, pp. 28–37.

Kurniati, N., Yeh, R. H, and Wu, C. W. (2014). Designing a Variables Two-Plan Sampling System of Type TNTVSS-(nT,nN;k) for Controlling Process Fraction Nonconforming with Unilateral Specification Limit. International Journal of Production Research (accepted). DOI: 10.1080/00207543.2014.946159

Kossler, W., Lenz, B., and Lenz, H. J. (1994). ExVar - Exact Variable Inspection Plans in Statistical Quality Control. Statistical Software Newsletter, Computational Statistics & Data Analysis 17, pp. 97–9.

Kossler, W. (1999). A New One-Sided Variables Inspection Plan for Continuous Distribution Functions. Allgemeines Statistisches Archiv 83(4), pp. 416–33.

Kotz, S., and Johnson, N. L. (2002). Process Capability Indices - A Review, 1992–2000. Journal of Quality Technology 34(1), pp.1–19.

Kotz, S., and Lovelace, C. (1998). Process Capability Indices in Theory and Practice. Arnold, London.

Lam, Y., Li, K. H., Ip, W. C., and Wong, H. (2006). Sequential Variable Sampling Plan for Normal Distribution. European Journal Operation Research 172, pp. 127–45.

Lieberman, G.J., and Resnikoff, G.J. (1955). Sampling Plans for Inspection by Variables. Journal of the American Statistical Association 50, pp. 72–5.

Montgomery, D. C. (2009). Statistical Quality Control, a Modern Introduction, sixth ed., John Wiley & Sons, NJ.

Murthy, D. N. P. (1991a). A Note on Minimal Repair. IEEE Transactions on Reliability 40(2), pp. 245–46.

Murthy, D. N. P., and Blischke, W. R. (1991a). Product Warranty Management—II: An Integrated Framework for Study. European Journal Operation Research 62, pp. 261–80.

Murthy, D. N. P., and Blischke, W. R. (1991b). Product Warranty Management—III: A Review of Mathematical Models. European Journal Operation Research 62, pp.1–34.

Murthy, D. N. P., Wilson, R. J., and Djamaludin, I. (1993). Product Warranty and Quality Control. Quality and Reliability Engineering International 9, pp. 431–43.

Murthy, D. N. P., and Djamaludin, I. (2002). New Product Warranty: a Literature Review. International Journal of Production Economics 79, pp. 231-60.

Murthy, D. N. P., and Jack, N. (2003). Warranty and Maintenance. Handbook of Reliability Engineering, Springer-Verlag, London.

Muthuraj, D., and Senthilkumar, D. (2006). Designing and Construction of Tightened–Normal–Tightened Variables Sampling Scheme. Journal of Applied Statistics 33, pp. 101–111.

Nakagawa, T. (1979). Optimum Replacement Policies for A Used Unit. Journal Operations Research Society of Japan 2, pp. 338–46.

Nakagawa, T. (1980). A Summary of Imperfect Preventive Maintenance Policies ith Minimal Repair. R.A.I.R.O. Rech. Operations 14, pp. 249–55.

Nakagawa, T. (1981). Modified Periodic Replacement with Minimal Repair at Failure. IEEE Transaction on Reliability 30, pp. 165–68.

Nakagawa, T., and Kowada, M. (1983). Analysis of A System with Minimal Repair and Its Applications to A Replacement Policy. European Journal of Operation Research 12, pp. 176–82.

Nakagawa, T. (2005). Maintenance Theory of Reliability. Springer Verlag, London.

Narayanan, G. S., and Vijayaraghavan, R. (2013). A Procedure for The Selection of Single Sampling Plans by Variables Based on Pareto Distribution. Journal of Quality and Reliability Engineering (2013).

National Association of Consumer Agency Administration, (1980). NACAA Product Warranties and Servicing, U.S Government. Printing Office, Washington DC.

Negrin, I., Parmet, Y., and Schechtman, E. (2011). Developing a Sampling Plan Based on Cpk – Unknown Variance. Quality and Reliability Engineering International 27 (1), pp. 3–14.

Nguyen D. G, and Murthy D. N. P. (1988). Failure Free Warranty Policies for Non-Reparable Products: A Review and Some Extensions. RAIRO. Operation Research 22, pp. 205–20.

Nguyen D. G, and Murthy D. N. P. (1989). Optimal Replace–Repair Strategy for Servicing Items Sold with Warranty. European Journal Operation Research 39, pp. 206–12.

Owen, D. B. (1967). Variables Sampling Plans Based on The Normal Distribution. Technometrics 9, pp. 417–23.

Pandey, D., Kulkarni, M. S., and Vrat, P. (2011). A Methodology for Joint Optimization for Maintenance Planning, Process Quality, and Production Scheduling. Computer & Industrial Engineering 61, pp. 1098–106.

Pearn, W.L., Kotz, S., and Johnson, N. L. (1992). Distributional and Inferential Properties of Process Capability Indices. Journal of Quality Technology 24(4), pp. 216–33.

Pearn, W.L., and Chen, K. S. (2002). One-sided Capability Indices: Decision Making with Sample Information. International Journal of Quality and Reliability Management 19(3), pp. 221–45.

Pearn., W. L., and Wu, C. W. (2006a). Variables Sampling Plans with PPM Fraction of Defectives and Process Loss Consideration. Journal of the Operational Research Society, 57, pp. 450–59.

Pearn., W. L., and Wu, C. W. (2006b). Critical Acceptance Values snd Sample Sizes of A Variables Sampling Plan for Very Low Fraction of Defectives. Omega - International Journal of Management Science 34, pp. 90–101.

Pearn., W. L., and Wu, C. W. (2007). An Effective Decision-Making Method for Product Acceptance. Omega - The International Journal of Management Science 35 (1), pp.12–21.

Pham, H., and Wang, H. (1996). Imperfect Maintenance. European Journal of Operational Research 94, pp. 425–38.

Phelps, R. I. (1981). Replacement Policies under Minimal Repair. Journal of Operations Research Society 32, pp. 549–54.

Phelps, R. I. (1983). Optimal Policies for Minimal Repair. Journal of Operations Research Society 34, pp. 425–27.

Sahin, I., and Polatoglu, H. (1998). Quality, Warranty and Preventive Maintenance. Kluwer Academic Publishers, Boston.

Schilling, E. G., and Neubauer, D. V. (2009). Acceptance Sampling in Quality Control, second ed., CRC Press, FL.

Seidel, W. (1997). Is Sampling by Variables Worse Than Sampling by Attributes? A Decision Theoretic Analysis and A New Mixed Strategy for Inspecting Individual Lots. Sankhya: The Indian Journal of Statistics 59(B), pp. 96–107.

Senthilkumar, D., and Muthuraj. D., (2010). Construction and Selection of Tightened–Normal–Tightened Variables Sampling Scheme of Type TNTVSS?{ . Journal of Applied Statistics 37 (3), pp. 375–90.

Shafiee, M., Chukova, S., and Saidi, M. (2011). Two-Dimensional Warranty Cost Analysis for Second-hand Products. Communications in Statistics Theory and Methods 40(4), pp. 684–701.

Sherif, Y. S., and Smith, M. L. (1976). Optimal Maintenance Models for Systems Subject to Failure-A Review. Naval Research Logistics and Quality 2, pp. 47–74.

Soundararajan, V., and Vijayaraghavan. R. (1992). Construction and Selection of Tightened–Normal–Tightened (TNT) Plans. Journal of Quality Technology 22 (2), pp. 146–53.

Spiring, F., Leung, B., Cheng, S., and Yeung, A. (2003). A Bibliography of Process Capability. Quality and Reliability Engineering International 19(5), pp. 445–60.

Stephens, L.J. (1978). A Closed Form Solution for Single Sample Acceptance Sampling Plans. Journal of Quality Technology 10 (4), pp. 159–63.

Stephens, K. S., and Larson, K. E. (1967). An Evaluation of the MIL-STD-105D System of Sampling Plans. Industrial Quality Control 23 (7), pp.310–19.

Suresh, R. P., and Ramanathan, T.V. (1997). Acceptance Sampling Plans by Variables for A Class of Symmetric Distributions. Communications in Statistics
Simulation and Computation 26 (4), pp. 1379–91.

Thomas, M., and Rao, S. (2000). Warranty Economic Decision Models: A Review and Suggested Directions for Future Research. Operation Research 47, pp. 7–20.

Thorpe, J. F., and Middendorf, W. H. (1979). Product liability. Marcel Dekker Inc., NY.

Tilquin, C., and Cleroux, R. (1975). Periodic Replacement with Minimal Repair at Failure and Adjustment Costs. Naval Research Logistics Quarterly 22, pp. 243–54.

Tsuchiya, S. (1992). Quality Maintenance: Zero Defect Through Equipment Management, Productivity Press, Portland.

Vijayaraghavan, R., and Soundararajan. V. (1996). Procedures and Tables for the Selection of Tightened–Normal–Tightened TNT- Sampling Schemes. Journal of Applied Statistics 23 (1), pp. 69–80.

Wu, C. W., Pearn, W. L., and Kotz, S. (2009). An Overview of Theory and Practice on Process Capability Indices for Quality Assurance. International Journal of Production Economics 117(2), pp. 338–59.

Wu, C. W. (2012). An Efficient Inspection Scheme for Variables Based on Taguchi Capability Index. European Journal of Operational Research 223 (1), pp. 116–22.

Wu, C. W., Aslam, M., and Jun, C. H. (2012). Variables Sampling Inspection Scheme for Resubmitted Lots Based on the Process Capability Index . European Journal of Operational Research 217, pp. 560–66.

Yum, B. J., and Kim, K.W. (2011). A Bibliography of The Literature on Process Capability Indices: 2000–2009. Quality and Reliability Engineering International 27(3), pp. 251–68.

Yeh, R. H, and Chen, T. H. (2006). Optimal Lot Size and Inspection Policy for Products sold with Warranty. European Journal of Operational Research 174, pp. 766–76.

Yeh, R. H, Kurniati, N., and Chang, W. L. (2015). Optimal Single Replacement Policy for Products with Free-Repair Warranty under A Finite Planning Horizon. Quality Technology & Quantitative Management 12(2).
電子全文 電子全文(網際網路公開日期:20250128)
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
系統版面圖檔 系統版面圖檔