|
[1]AGMA 908-B89, 1984, Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth. [2]ASNI/AGMA ISO 2003-B97, 2006, Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth, Alexandria VA. [3]Litvin, F. L., and Fuentes A., 2004 ,”Gear Geometry and Applied Theory, 2nd Edition”, Cambridge University Press, Cambridge, UK. [4]蔣岳峰,五軸CNC成形砂輪磨齒機數學模式之研究,國立台灣科技大學,2011。 [5]Shih, Y. P., and Fong, Z. H., 2007, “Flank Modification Methodology for Face-Hobbing Hypoid Gears Based on Ease-Off Topography,” Transactions of ASME, Journal of Mechanical Design, 129(12), pp. 1294-1302. [6]Tasi, Y. C., and Chin, P. C., 1987, “Surface Geometry of Straight and Spiral Bevel Gear”, Transactions of ASME, Journal of Mechanisms, Transmissions and Automation in Design, Vol. 109, No 4, pp. 443-449. [7]Shunmugam, M. S., Rao, B. S., and Jayaprakash, V., 1998, “Establishing Gear Tooth Surface Geometry and Normal Deviation, Part II - Bevel Gears,” Mechanism and Machine Theory, Vol. 33, No. 5, pp. 525-534. [8]Al-Daccak, M. L., Angeles, J., and González-Palacios, M. A., 1994, “The Modeling of Bevel Gears Using the Exact Spherical Involute,” Transactions of ASME, Journal of Mechanical Design, Vol. 116, No. 2, pp.364-368. [9]Litvin, F. L., Chaing, W. S., Kuan, C., Lundy, M., and Tsung, W. J., 1991, “Generation and Geometry of Hypoid Gear-Member with Face-Hobbed Teeth of Uniform Depth,” International Journal of Machine Tools and Manufacture, Vol. 31, No. 2, pp. 167-181. [10]Shih, Y. P., Fong, Z. H., and Lin, C. Y., 2007, “Mathematical Model for a Universal Face Hobbing Hypoid Gear Generator,” Transactions of ASME, Journal of Mechanical Design, Vol. 129, No. 1, pp. 38-47. [11]Litvin. F. L., Fuentes, A., Fan, Q., Handschuh, R. F., 2002, “Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears”, Mechanism and Machine Theory, 37(5), pp. 441-459. [12]Litvin, F. L., Fuentes, A., Pontiggia, M., and Zamzi, C., 2002, “Design, generation, and stress analysis of two versions of geometry of face-gear drives”, Mechanism and Machine Theory, 37(10), pp. 1179-1211. [13]Lou, J. J., Cao, X. M., and Jiao, J. S., 2013, “Design, generation, and stress analysis of two versions of geometry of face-gear drives”, Applied Mechanics and Materials, 401-403, pp. 345-349. [14]Lee, H. H., 2014, “Finite Element Simulations with ANSYS Workbench15”, Chuan Hwa Book Co., Ltd. [15]李輝煌,ANSYS工程分析基礎與觀念,高立圖書有限公司,1999。 [16]Sankpal, A.M., and Mirza, M. M., 2014, “Contact Stress Analysis of Spur Gear by Photoelastic Technique and Finite Element Analysis”, International Journal on Theoretical and Applied Research in Mechanical Engineering, 3(2). [17]Koisha, J. R., and Doshi, H. P., 2012, “Influence of Friction on Contact Stress for Small Power Transmission Planetary Gear Box”, International Journal of Engineering Research and Development, 1(5), pp. 38-43. [18]Chen, Y. C., and Tsay, C. B., 2002, ”Stress analysis of a helical gear set with localized bearing contact”, Finite Element in Analysis and Design, 38, pp.707-723. [19]張金良,方宗德,曹雪梅,李盛鵬,弧齒錐齒輪齒面接觸應力分析,機械科學與技術,第26卷,第10期,2007。 [20]伍志明,直傘齒輪有限元素應力分析之研究,國立台灣科技大學,2012。 [21]Heo, S. C., Kim, J., Kang, B. S., 2006, “Investigation on determination of loading path to enhance formability in tube hydroforming process using APDL”, Journal of Materials Processing Technology, 177, pp.653-657 [22]黛曙光,謝桂蘭,黃雲清,ANSYS 參數化編程與命令手冊,機械工業出版社,2009。
|