[1]. I. Vroman and L. Tighzert, “Biodegradable Polymers”, Material, vol. 2, 2009, pp. 307-344.
[2]. S .Higashi, T .Yamamuro, T .Nakamura, “Polymer-hydroxyapatite composites for
biodegradable bone fillers”, Biomaterials, vol. 7, 1986, pp. 183-187.
[3]. F. Witte, “The history of biodegradable magnesium implants: A review”, Acta Biomaterialia, vol.6, 2010, pp. 1680-1692.
[4]. B. Zberg, P. J. Uggowitzer1 and J. F. Löffler, “MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants”, Nature Materials, vol. 8, 2009, pp. 887-890.
[5]. Y. K. Xu, H. Ma, J. Xu and E. Ma, “Mg-based bulk metallic glass composites with plasticity and gigapascal strength”, Acta Materialia, vol. 53, 2005, pp. 1857-1866.
[6]. H. A. Bruck, T. Chrictman, A. J. Rosakis and W. L. Johnson, “Quasi-static constitutive behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk amorphous alloys”, Scripta Metallurgica et Materialia, vol. 30, 1994, pp. 429-434.
[7]. H. A. Bruck, A. J. Rosakis and W. L. Johnson, “The dynamic compressive behavior of beryllium bearing bulk metallic glasses”, Journal of Materials Research, vol. 11, 1996, pp. 503-511.
[8]. T. B . Matias, V. Roche, R. P . Nogueira, “Mg-Zn-Ca amorphous alloys for application as temporary implant : Effect of Zn content of the mechanical and corrosion properties”, Materials and Design ,vol. 110, 2016, pp. 188-195.
[9]. J.S.C. Jang, W.J. Li, T.H. Li, and S.R. Jian, “Thermoplastic forming ability of a Mg-base bulk metallic glass composites reinforced with porous Mo particles”, Intermetallics, vol. 18, 2010, pp. 1964-1968.
[10]. J.S.C. Jang, L.J. Chang and J.H. Young, “Synthesis and characterization of the Mg-based amorphous/nano ZrO2 composite alloy”, Intermetallics, vol. 14, 2006, pp. 945-950.
[11]. T Egami, “Magnetic amorphous alloys: physics and technological applications”, Reports on Progress in Physics, vol. 47, 1984, pp. 1601-1725.
[12]. A. Inoue, B. L. Shen, A.R. Yavari and A. L. Greer, “Mechanical Properties of Fe-Based Bulk Glassy Alloys in Fe-B-Si-Nb and Fe-Ga-P-C-B-Si systems”, Journal of Materials Research, vol. 18, 2003, pp.1487-1492.
[13]. S.N. Wang, J.C. Cheng, S.H. Yi, L.M. Ke, “Corrosion resistance of Fe-based amorphous metallic matrix coating fabricated by HVOF thermal spraying”, Transactions of Nonferrous Metals Society of China, vol. 24, 2014, pp. 146-151.
[14]. J. Kramer, “Amorphous Ferromagnetic in Iron-Carbon-Phosphorus Alloys”, Journal of Applied Physics, vol. 19, 1934, pp. 37.
[15]. A. Brenner, D. E. Couch, E. K. Williams, “Electrodeposition of alloys of phosphorus with nickel or cobalt”, Journal of Research of the National Bureau of Standards, vol. 44, 1950, pp.109-122.
[16]. W. Klement, R. Willens and P. Duwez, “Non-crystalline Structure in Solidified Gold-Silicon Alloys”, Nature Materials, vol. 187, 1960, pp. 869-870.
[17]. P. Duwez and S. C. H. Lin, “Amorphous Ferromagnetic Phase in Iron-Carbon- Phosphorus Alloys”, Nature, Journal of Applied Physics., vol.38, 1967, pp. 4096-4097.
[18]. D. Turnbull, “Phase Changes”, Solid State Physics, vol. 3, 1956, pp. 225-306.
[19]. D. Turnbull, “Amorphous solid formation and interstitial solution behavior in metallic alloy system”, Journal of Physics, vol. 35, 1974, pp. 1-10.
[20]. D. R. Uhlmann, J. F. Hays and Turnbull, “The effect of high pressure on crystallization kinetics with special reference to fused silica”, Physics and Chemistry of Glasses, vol. 7, 1966, pp. 159-168.
[21]. H. A. Davies, “The formation of metallic glass”, Physics and Chemistry of Glasses, vol. 17, 1976, pp. 159-173.
[22]. 吳學陞著,新興材料-塊狀非晶質金屬材料,工業材料,第149期,1999年。[23]. A. Inoue, K. Hashimoto, Amorphous and Nanocrystalline Materials, SpringerLink, Inc., Berlin Heidelberg, 1995.
[24]. A. Inoue, “Bulk amorphous alloys with soft and hard magnetic properties”, Materials Science & Engineering, A, vol. 226-228, 1997, pp. 357-363.
[25]. A. Inoue, A. Kato, T. Zhang, S. G. Kim, and T. Masumoto, “Mg-Cu-Y Amorphous Alloys with High Mechanical Strengths Produced by Metallic Mold Casting Method”, Materials Transactions, JIM, vol. 32-7, 1991, pp. 609-616.
[26]. A. Inoue, T. Nakamura, N. Nishiyama, and T. Masumoto, “Mg-Cu-Y Bulk Amorphous Alloy with High Tensile Strength Produced by High-Pressure Die Casting Method”, Materials Transactions, JIM, vol. 33-10, 1992, pp. 937-945.
[27]. C. Y. Haein, D. C. Robert, S. Frigyes, and L. J. William, “Quasistatic and dynamic deformation of tungsten reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass matrix composites”, Scripta Materialia, vol. 45, 2001, pp. 1039-1045.
[28]. Y. K. Xu and J. Xu, “Ceramics particulate reinforced Mg65Cu20Zn5Y10 bulk metallic glass composites”, Scripta Materialia, vol. 49, 2003, pp. 843-848.
[29]. D. G. Pan, H. F. Zhang, A. M. Wang, and Z. Q. Hu.,“Enhanced plasticity in Mg-based bulk metallic glass composite reinforced with ductile Nb particles”, Applied Physics Letters, vol.89, 2006. pp. 1-3
[30]. N. Nishiyama, K. Takenaka, T. Wada, H. Kimura, A. Inoue, “New Pd-based bulk glassy alloys with high glass-forming ability”, Journal of Alloys and Compounds, vol. 434-435, 2007, pp. 138-140.
[31]. A. Inoue, “High strength bulk amorphous alloys with low critical cooling rates”, Materials Transactions JIM, vol. 36, 1995, pp. 866-875.
[32]. A. Inoue, A. Takeuchi and T. Zhang, “Ferromagnetic bulk amorphous alloys”, Metallurgical and Materials Transactions, vol. 29, 1998, pp. 1779-1793.
[33]. A. Inoue, T. Zhang, A. Takeuchi, “Ferrous and nonferrous bulk amorphous alloys”, Materials Science Forum, vol. 269-272, 1998, pp. 855-864.
[34]. R. E. Reed-Hill, Physical Metallurgy Principles 3rd edition, PWS Pub. Co., Boston, USA, 1994.
[35]. R. W. Cahn, P. Hassen and E. J. Kramer, Materials Science and Technology, John Wiley & Sons Inc., New York, USA, 1991.
[36]. W. Paul and R. J. Temkin, “Amorphous germanium I. A model for the structural and optical properties”, vol. 22, Advances in Physics, 1973, pp. 531-580.
[37]. K. L. Chapra, “Thin Film Phenomena”, McGraw-Hill, New York, 1969.
[38]. B. Li, N. Nordstrom and E. J. Lavernia, “Spray forming of zircaloy-4”, Materials Science and Engineering, vol. 237, 1997, pp. 207-215.
[39]. R. Liu, J. Li, K. Dong, C. Zheng and H. Liu, “Formation and evolution properties of clusters in a large liquid metal system during rapid cooling processes”, Materials Science and Engineering, vol. 94, 2002, pp. 141-148.
[40]. P. S. Grant, “Spray forming”, Progress in Materials Science, vol. 39, 1995, p. 497-545.
[41]. C. R. M. Afonso, C. Bolfarini, C. S. Kiminami and N. D. Bassim, “Amorphous phase formation during spray forming of Al84Y3Ni8Co4Zr1 alloy”, Journal of Non-Crystalline Solid, vol. 284, 2001, pp. 134-138.
[42]. S. R. Elliot, Physics of Amorphous Materials, Longman, Harlow, 1990.
[43]. A. Inoue, “Stabilization of metallic supercooled liquid and bulk amorphous alloys”, Acta Materialia, vol. 48, 1968, pp. 2560-2565.
[44]. W. Kauzman, “The nature of the glassy state and the behavior of liquids at low temperatures”, Chemical Reviews, vol. 43, 1948, pp. 219-225.
[45]. R. J. Greet and D. Turnbull, “Test of Adam-Gobbs Liquid Viscosity Model with 0-terphenyl Specific-Heat Data”, The Journal of Chemical Physics, vol. 47, 1967, pp. 2185-2190.
[46]. A. Inoue, W. Zhang, T. Zhang and K. Kurosaka,“Formation and mechanical properties of Cu-Hf-Ti bulk glassy alloys”, Journal of Materials Research, vol. 16, 2001, pp. 2836-2844.
[47]. 顧宜著,複合材料,新文京開發出版公司,1992年。
[48]. 許樹恩、吳泰伯著,X光繞射原理與材料結構分析,中國材料科學學會,1996年。
[49]. A. Inoue, “Bulk Amorphous Alloys Practical Characteristics and Applications, Institute for Material Research”, Tohoku University, Sendai, Japan, 1999.
[50]. 鄭振東編譯,非金質金屬漫談,建宏出版社,1990年。
[51]. A. S. Argon, “Plastic Deformation in Metallic Glasses”, Acta Metallurgica, vol. 27, 1979, pp. 47-58.
[52]. W. C. Oliver and G. M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sening indentation experiments”, Journal of Materials Research, vol. 7, 1992, pp. 1564-1583.
[53]. S. R. Elliot, Physics of Amorphous Materials 2nd Ed., John Wiley & Sons, Inc., USA, 1990.
[54]. F. Spaepen, “A microscopic mechanism for steady state inhomogeneous flow in metallic glasses”, Acta Metallurgica, vol. 25, 1977, pp. 407-415.
[55]. A. Inoue, B. L. Shen, H. Koshiba, H. Kato and A. R. Yavari, “Cobalt-Based Bulk Glassy Alloy with Ultrahigh Strength and Soft Magnetic Properties”, Nature Material, vol. 2, 2003, pp. 661-663.
[56]. Y. N. Zhang, G. J. Rocher, B. Briccoli, D. Kevorkov, X. B. Liu, Z. Altounian, and M. Medraj, “Crystallization characteristics of the Mg-rich metallic glasses in the Ca–Mg–Zn system”, Journal of Alloys and Compounds, vol. 552, 2013, pp. 88-97.
[57]. D. C. Hofmann, J. Y. Suh, A. Wiest, G. Duan, M. L. Lind, M. D. Demetriou, and W. L. Johnson, “Designing metallic glass matrix composites with high toughness and tensile ductility”, Nature Letters, vol. 451, 2008, pp. 1085-1088.
[58]. Z. Zhang, F. Wu, G. He, and J. Eckert, “Mechanical Properties, Damage and Fracture Mechanisms of Bulk Metallic Glass Materials”, Journal of Materials Science & Technology, vol. 23, 2007, pp. 747-767.