[1]Mishra, R.S. and Ma, Z.Y., "Friction stir welding and processing.". Materials Science and Engineering R50(2005):1-78.
[2]Rhodes, C.G., Mahoney, M.W., Bingel, W.H., Spurling, R.A. and Bampton, C.C., "Effects of friction stir welding on microstructure of 7075 aluminum". Scripta Materialia 36(1997):69-75.
[3]Dawes, C.J. and Thomas, W.M., "Friction stir process welds aluminum alloys: the process produces low-distortion, high quality, low-cost welds on aluminum". Welding Journal 75(1996):41-45.
[4]Dawes, C.J., "An introduction to friction stir welding and its development". Welding and Metal Fabrication 63(1995):12-16.
[5]Mishra, R.S., De, P.S. and Kumar, N., "Friction stir welding and processing science and engineering". 2014, New York: Springer.
[6]Liu, H., Fujii, H., Maeda, M. and Nog, K., "Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloy". Journal of Materials Science Letters 22(2003):1061-1063.
[7]Sato, Y.S., Kokawa, H., Ikeda, K., Enomoto, M., Jogan, S. and Hashimoto, T., "Microstructure in the friction-stir weld of an aluminum alloy". Metallurgical and Materials Transactions A 32(2001):941-948.
[8]Krishnan, K.N., "On the formation of onion rings in the friction stir welds.". Materials Science and Engineering: A 327(2002):246.
[9]Baillas, G. and Donne, C.D., "Characterisazion of friction stir welded joints of the aluminium alloy AA 2024-T3 by laser extensometry". Materialprufung 42(2000):236-239.
[10]Đurđanović, M.B., Mijajlović, M.M., Milčić, D.S. and Stamenković, D.S., "Heat Generation During Friction Stir Welding Process". Tribology in industry 31(2009):8-14.
[11]Arbegast, J.W., "Friction stir welding after a decade of development". Welding Journal 85(2006):28-35.
[12]Merzoug, M., Mazari, M., Berrahal, L. and Imad, A., "Parameteric studies of the process of friction spot stir welding of Aluminum 6060-T5 alloys". Materials and Design 31(2010):3023-3028.
[13]Sato, Y.S., Park, S.H.C., Michiuchi, M. and Kokawa, H., "Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys". Scripta Materialia 50(2004):1233-1236.
[14]Miyagawa, K., Tsubaki, M., Yasui, T. and Fukumoto, M., "Spot welding between aluminium alloy and low-carbon steel by friction stirring". Welding International 23(2009):559-564.
[15]Sakano, R., Murakami, K. and Yamashita, K., "Development of spot FSW robot system for automobile body members". in Proceedings of the 3rd International Symposium of Friction Stir Welding and Metal Fabrication, Kobe, Japan (2004).
[16]Sprovieri, J., "Friction Stir Spot Welding", in Assembly Magazine. 2016-04-07, Design, CMS, Hosting & Web Development : ePublishing. p. 1-6.
[17]Sakano, R., Murakami, K., Yamashita, K., Hyoe, T., Fuzimoto, M., Inuzuka, M., Nagao, Y. and Kashiki, H., "Development of spot FSW robot system for automobile body members.". In: Proceedings of the 3rd International Symposium of Friction Stir Welding, Kobe, Japan. TWI (2001).
[18]Iwashita, T., "Method and apparatus for joining". U.S., 6601751 B2(2003).
[19]Nguyen, N.T., Kim, D.Y. and Kim, H.Y., "Assessment of the failure load for an AA6061-T6 friction stir spot welding joint". Proceedings of the Institution of Mechanical Engineers B: Journal of Engineering Manufacture 225(2011):1746–1756.
[20]Tozaki, Y., Uematsu, Y. and Tokaji, K., "A newly developed tool without probe for friction stir spot welding and its performance". Journal of Materials Processing Technology 210(2010):844–851.
[21]Cox, C.D., Gibson, B.T., Strauss, A.M. and Cook, G.E., "Effect of Pin Length and Rotation Rate on the Tensile Strength of a Friction Stir Spot-Welded Al Alloy: A Contribution to Automated Production". Materials and Manufacturing Processes 27(2012):472–478.
[22]Tozaki, Y., Uematsu, Y. and Tokaji, K., "A newly developed tool without probe for friction stir lap welding and its performance. ". Journal of Materials Processing Technology 210(2010):844-851.
[23]Schilling, C. and Santos, J.D., "Method and device for joining at least two adjoining work pieces by friction welding". U.S., 6722556 B2(2004).
[24]Schultz, J.P. and Creehan, K., "Self-reacting friction stir welding tool with the ability to add filler material". U.S. , 8397974 B2(2012).
[25]Rosendo, T., Parra, B. and Tier, M.A.D., "Mechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy". Materials & Design 32(2011):1094–1100.
[26]Sun, Y.F., Fujii, H., Takaki, N. and Okitsu, Y., "Novel spot friction stir welding of 6061 and 5052 Al alloys". Science and Technology of Welding and Joining 16(2011):605–612.
[27]Okamoto, K., Hunt, F. and Hirano, S., "Development of Friction Stir Welding Technique and Machine for Aluminum Sheet Metal Assembly- Friction Stir Welding of Aluminum for Automotive Applications". SAE Technical Paper 2005-01-1254 SAE 2005 World Congress and Exhibition(2005).
[28]Mishra, R.S. and Mahoney, M.W., "Friction Stir Welding and Processing". 2007, Ohio: ASM International.
[29]Wang, D.A. and Lee, S.C., "Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-T6 sheets". Journal of Materials Processing Technology 186(2007):291–297.
[30]Mao, Y.Q., Ke, L.M., Liu, F.C., Liu, Q., Huang, C.P. and Xing, L., "Effect of tool pin eccentricity on microstructure and mechanical properties in friction stir welded 7075 aluminum alloy thick plate". Materials and Design 62(2014):334-343.
[31]Kou, S., "Welding metallurgy". 2003, US: John Wiley & Sons.
[32]Zhang, Z.H., Yang, X.Q., Zhang, J.L., Zhou, G., Xu, X. and Zou, B., "Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy". Materials & Design 32(2011):4461–4470.
[33]Wang, D., Chao, C., Lin, P. and Uan, J., "Mechanical characterization of friction stir spot microwelds". Journal of Materials Processing Technology 210(2010):1942–1948.
[34]Sun, Y.F., Fujii, H., Takaki, N. and Okitsu, Y., "Microstructure and mechanical properties of mild steel joints prepared by a flat friction stir spot welding technique". Materials & Design 37(2012):384–392.
[35]Badarinarayan, H., Yang, Q. and Zhu, S., "Effect of tool geometry on static strength of friction stir spot-welded aluminum alloy". International Journal of Machine Tools and Manufacture 49(2009):142–148.
[36]Badarinarayan, H., Shi, Y., Li, X. and Okamoto, K., "Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminum 5754-O sheets". International Journal of Machine Tools and Manufacture 49(2009):814–823.
[37]Yan, J., Sutton, M.A. and Reynolds, A.P., "Process structure property relationships for nugget and heat affected zone regions of AA2524-T351 friction stir welds". Science and Technology of Welding and Joining 10(2005):356-359.
[38]Sutton, M.A., Reynolds, A.P., Yang, B. and Taylor, R., "Mode I fracture and microstructure for 2024-T3 friction stir welds". Materials Science Engineering A 354(2003):6-16.
[39]Sutton, M.A., Reynolds, A.P., Yan, J., Yang, B. and Yuan, N., "Microstructure and mixed mode I/ fracture of AA2524-T351 base material and friction stir welds". Engineering fracture mechanics 73(2006):391-407.
[40]Charit, I. and Mishra, R.S., "Low temperature superplasticity in a friction stir processed ultrafine-grained Al-Zn-Mg-Sc alloy". Acta Materialia 53(2005):4211-4223.
[41]Colligan, K., "Tapered friction stir welding tool". U.S., 6669075(2003).
[42]Thomas, W.M., Nicholas, E.D., Needham, J.C., Murch, M.G., Templesmith, P. and Drawes, C.J., "Friction stir butt welding". International Patent Application PCT/GB92/02203 G.B. Patent Application 9125978-8(1991).
[43]Thomas, W.M., Lockyer, S.A., Kalee, S.W. and Staines, D.G., "Friction stir welding: an update on recent developments". Proceedings of the Conference on Stressed Components in Aluminum Alloys, Birmingham, UK. (2003).
[44]Colegrove, P.A., Shercliff, H.R. and Threadgill, P.L. "Modeling and development of the Trivex friction stir welding tool". in Proceedings of the Fourth International Conference on Friction stir Welding. 2003. Park city, UT.
[45]Elangovan, K. and Balasubramanian, V., "Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminum alloy". Materials Science and Engineering A 459(2007):7-18.
[46]Thomas, W.M., Lockyer, S.A., Kalee, S.W. and Staines, D.G. "Friction stir welding: an update on recent developments". in Proceedings of the Conference on Stressed Components in Aluminium Alloys. 2003. Birmingham, U.K.
[47]Colegrove, P.A. and Shercliff, H.R., "Development of Trivex friction stir welding tool Part 1 – two-dimensional flow modelling and experimental validation". Science and Technology of Welding and Joining 9(2004):345-351.
[48]Sun, N., Yin, Y.H., Gerlich, A.P. and North, T.H., "Tool design and stir zone grain size in AZ31 friction stir spot welds". Science and Technology of Welding and Joining 14(2009):747-752.
[49]Rowe, C.E.D. and Thomas, W.M., "Advances in tooling materials for friction stir welding". Technical report, TWI Cambridge. U.K. (2005).
[50]Aota, K. and Ikeuchi, K., "Development of friction stir spot welding using rotating tool without probe and its application to low-carbon steel plates. ". Welding Inter 23(2009):572–580.
[51]Aota, K. and Ikeuchi, K., "Friction stir welding of aluminium lap joint by tool without probe". Welding International 24(2010):197-205.
[52]Bakavos, D., Chen, Y., Babout, L. and Prangnell, P., "Material interactions in a novel pinless tool approach to friction stir spot welding thin Aluminum Sheet". Metallurgical and Materials Transactions A 42A(2011).
[53]Woo, W., Choo, H., Brown, D.W., Feng, Z. and Liaw, P.K., "Angular distortion and through-thickness residual stress distribution in the friction-stir processed 6061-T6 aluminum alloy". Materials Science and Engineering 437A(2006):64-69.
[54]Chiou, Y.C., Liu, C.T. and Lee, R.T., "A pinless embedded tool used in FSLW and FSW of aluminum alloy". Journal of Materials Processing Technology 213(2013):1818-1824.
[55]卓光明, "使用一新穎銲接工具對摩擦攪拌銲接厚板的鋁合金之研究", 機械與機電工程學系. 2013, 國立中山大學.
[56]Schneider, J.A., Nunes, A.C., Chen, P.S. and Steele, G., "TEM Study of the FSW Nugget in AA2195-T81". Journal of Materials Science 40(2005):4341–4345.
[57]Trimble, D., Monaghan, J. and O’Donnell, G.E., "Force generation during friction stir welding of AA2024-T3". CIRP Annals - Manufacturing Technology 61(2012):9–12.
[58]Frigaard, Q., Grong, Q. and Midling, O.T., "A process model for friction stir welding of age hardening aluminum alloys". Metallurgical and Materials Transactions A 32(2001):1189–1200.
[59]Dehghani, M., Mousava, S.A.A.A. and Amadeh, A., "Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weld". Transactions of Nonferrous Metals Society of China 23(2013):1957–1965.
[60]Dehghani, M., Amadeh, A. and Mousavi, S.A.A.A., "Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel". Materials & Design 49(2013):433–441.
[61]Das, H., Jana, S.S., Pal, T.K. and De, A., "Numerical and experimental investigation on friction stir lap welding of aluminium to steel". Science and Technology of Welding and Joining 19(2014):69–75.
[62]Chen, Z.W., Yazdanian, S. and Littlefair, G., "Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds". Journal of Materials Science & Technology 48(2013):2624–2634.
[63]Chao, Y.J., Liu, S. and Chien, C.H., "Friction stir welding of Al 6061-T6 thick plates: part I – experimental analyses of thermal and mechanical phenomena". Journal of the Chinese Institute of Engineers 31(2008):757-767.
[64]劉澄芳, 林偉邦, 黃明哲, "能量守恆法預測鋁合金6061-T6摩擦攪拌銲接製程之預熱時間". 黃埔學報 53(2007):75-88.[65]Xu, S., Deng, X., Reynolds, A.P. and Seidel, T.U., "Finite element simulation of material flow in friction stir welding". Science and Technology of Welding and Joining 6(2001):191–193.
[66]Reynolds, A.P., Deng, X., Seidel, T. and Xu, S. "Recent advancements in FSW process physics". in Joining of Advanced and Specialty Materials. 2000. MO, USA
[67]Colegrove, P.A., "Three Dimensional Flow and Thermal Modelling of the Friction Stir Welding Process". Proceedings of the 2nd International Symposium on Friction Stir Welding, Gothenburg, Sweden. (2000).
[68]Schmidt, H.B. and Hattel, J.H., "Thermal modelling of friction stir welding". Scripta Materialia 58(2008):332–337.
[69]Nandan, R., Roy, G.G. and Debroy, T., "Numerical Simulation of Three Dimensional Heat Transfer and Plastic Flow During Friction Stir Welding". Metallurgical and Materials Transactions A 37(2006):1247-1259.
[70]Schmidt, H., Hattel, J. and Wert, J., "An analytical model for heat generation in friction stir welding". Modelling and Simulation in Materials Science and Engineering 12(2004):143-157.
[71]劉國雄, 林樹均, 李勝隆, 鄭晃忠, 葉均蔚, "工程材料科學". 1991: 全華圖書股份有限公司.
[72]Kapoor, R. and Nemat-Nasser, S., "Determination of temperature rise during high strain rate deformation". Mechaincs of Materials 27(1998):1-12.
[73]Hodowany, J., Ravichandran, G., Rosakis, A.J. and Rosakis, P., "Partition of Plastic Work into heat and stored in metals". Experimental Mechanics 40(2000):113-123.
[74]Russel, M.J. and Shereliff, H.R. "Analytical modeling of microstructure development in friction stir welding". in 1st International Symposium on Friction Stir Welding. 1999. CA, USA.
[75]Colligan, K.J. and Mishra, R.S., "A conceptual model for the process variables related to heat generation in friction stir welding of aluminum". Scripta Materialia 58(2008):327–331.
[76]Awang, M. and Mucino, V.H., "Energy Generation during Friction Stir Spot Welding of Al 6061-T6 plates". Materials and Manufacturing Processes 25(2010):167-174.
[77]Peel, M.J., Steuwer, A., Withers, P.J., Dickerson, T., Shi, Q. and Shercliff, H., "Dissimilar Friction Stir Welds in AA5083-AA6082. Part I: Process Parameter Effects on Thermal History and Weld Properties". Metallurgical and Materials Transactions A 37A(2006):2183-2193.
[78]Feng, Z., Santella, M.L., David, S.A., Steel, R.J., Packer, S.M., Pan, T., Kuo, M. and Bhatnagar, R.S., "Friction stir spot welding of advanced high-strength steels-a feasibility study". SAE International 2005-01-1248(2005).
[79]Hovanski, Y., Santella, M.L. and Grant, G.J., "Friction stir spot welding of hot-stamped boron steel". Scripta Materialia 57(2007):873-876.
[80]Choi, D.H., Lee, C.Y., Ahn, B.W., Choi, J.H., Yeon, Y.M., Song, K., Park, H.S., Kim, Y.J., Yoo, C.D. and Jung, S.B., "Frictional wear evaluation of WC-Co alloy tool infriction stir spot welding of low carbon steel plates". International Journal of Refractory Metals and Hard Materials 27(2009):931-936.
[81]Ghosh, M., Kumar, K. and Mishra, R.S., "Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties". Materials Science and Engineering A 528(2011):8111-8119.
[82]Chen, C.M. and Kovacevic, R., "Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding". International Journal of Machine Tools and Manufacture 44(2004): 1205-1214.
[83]Kimapong, K. and Watanabe, T., "Effect of Welding Process Parameters on Mechanical Property of FSW Lap Joint between Aluminum Alloy and Steel". Materials Transactions 46(2005):2211-2217.
[84]Miyagawa, K., Tsubaki, M., Yasui, T. and Fukumoto, M., "Spot welding between aluminium alloy and low-carbon steel by friction stirring". Welding International 23(2009):559–564.
[85]Aota, K., Takahashi, M. and Ikeuchi, K., "Friction stir spot welding of aluminium to steel by rotating tool without probe". Welding International 24(2010):96-104.
[86]Bozzi, S., Helbert-tter, A.L., Baudin, T., Criqui, B. and Kerbiguet, J.G., "Intermetallic compounds in Al 6016/IF-steel friction stir spot welds". Materials Science and Engineering: A 17(2010):4505–4509.
[87]Nishimoto, K., Okumoto, Y., Harano, T., Atagi, K., Fujii, H. and Katayama, S., "Laser pressure welding of aluminium and galvannealed steel.". Welding International 23(2009):734–743.
[88]Ozaki, H. and Kutsuna, M., "Dissimilar Metal Joining of Zinc Coated Steel and Aluminum Alloy by Laser Roll Welding". Welding Processes 2(2012):2.
[89]Potesser, M., Schoeberl, T., Antrekowitsch, H. and Bruckner, J., "The characterization of the intermetallic Fe-Al layer of steel-aluminum welding". EPD Congress 2006 Edited by S.M. Howard, R.L. Stephens, C.J. Newman, J.-Y.J. Hwang, A.M. Gokhale, T.T. Chen, TMS (The Minerals, Metals & Materials Society) (2006):167-176.
[90]Taban, E., Gould, J.E. and Lippold, J.C., "Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: properties and microstructural characterization". Materials & Design 31(2010):2305–2311.
[91]Elrefaey, A., Takahashi, M. and Ikeuchi, K., "Friction stir welded lap joint of aluminum to zinc-coated steel". 溶接學会論文集 23(2005):186-193.
[92]Uematsu, Y., Tokaji, K., Tozaki, Y., Nakashima, Y. and Shimizu, T., "Fatigue behaviour of dissimilar friction stir spot welds between A6061-T6 and low carbon steel sheets welded by a scroll grooved tool without probe". Fatigue & Fracture of Engineering Materials & Structures 34(2011):581-591.
[93]Sun, Y.F., Shen, J.M., Morisada, Y. and Fujii, H., "Spot friction stir welding of low carbon steel plates preheated by high frequency induction". Materials & Design 54(2014):450–457.
[94]Pradeep, A., "A Review on Friction Stir Welding of Steel". International Journal of Engineering Research and Development 3(2012).
[95]Lee, R.T., Liu, C.T., Chiou, Y.C. and Chen, H.L., "Effect of nickel coating on the shear strength of FSW lap joint between Ni–Cu alloy and steel". Journal of Materials Processing Technology 213(2013):69–74.
[96]Bhushan, B., "Introduction to tribology". 2002, New York: Wiley Interscience.
[97]Pirso, J., Letunovits, S. and Viljus, M., "Friction and wear behaviour of cemented carbides.". Wear 257(2004):257–265.
[98]邱源成, 李榮宗, 謝銘哲, "摩擦攪拌熔接工作台及其夾具". R.O.C., I415702(2013).
[99]菊地喜久南原著, 饒煥欽, 寇立人譯, "鋼材之性能與利用". 民86, 台南市: 復漢出版社.
[100]張印本, 楊良太, 嚴世明, "ASTM:金屬材料規格與對照". 民86, 台北市: 全華圖書股份有限公司.
[101]Gandy, D., "Carbon steel handbook". 2007, California USA: Electric power reaearch institute.
[102]Kyusojin, A., Nishimoto, K., Otobe, Y., Kanai, S. and Ogasawara, Y., "Study on Mechanism of Friction Welding in Carbon Steels". Bulletin of the JSME 23(1980):1388-1395.
[103]Li, Y., Bushby, A.J. and Dunstan, D.J., "The Hall-Petch effect as a manifestation of the general size effect". Proceedings of the Royal Society A 472(2016):1-33.
[104]溶接学会編, "溶接.接合便覧". 平成15, 東京都: 丸善株式会社.
[105]Kumar, R., Singh, K. and Pandey, S., "Process forces and heat input as function of process parameters in AA5083 friction stir welds ". Transactions of Nonferrous Metals Society of China 22(2012):288-298
[106]Zahedul, M., Khandkar, H. and Khan, J., "Thermal Modeling of Overlap Friction Stir Welding for Al-Alloys". Journal of Materials Processing and Manufacturing Science 10(2001):91-105.
[107]Gerlich, A., Su, P. and North, T.H., "Peak temperatures and microstructures in aluminium and magnesium alloy friction stir spot welds". Science and Technology of Welding and Joining 10(2005):647-652.
[108]Hwang, Y.M., Kang, Z.W., Chiou, Y.C. and Hsu, H.H., "Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys". International Journal of Machine Tools and Manufacture 48(2008):778-787.
[109]Campanelli, S.L., Casalino, G., Casavola, C. and Moramarco, V., "Analysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy". Materials 6(2013):5923-5941.
[110]Morris, J.W. "The Influence of Grain Size on the Mechanical Properties of Steel". 2001; Available from: http://escholarship.org/uc/item/88g8n6f8.
[111]Liyanage, T., Kilbourne, J., Gerlich, A.P. and North, T.H., "Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds.". Science and Technology of Welding and Joining 14(2009):500–508.
[112]Fereiduni, E., Movahedi, M. and Kokabi, A.H., "Aluminum/steel joints made by an alternative friction stir spot welding process.". Journal of Materials Processing Technology 224(2015):1–10.
[113]Zhang, G.F., Su, W., Zhang, J.X. and Wei, Z.X., "Friction stir brazing: a novel process for fabricating Al/steel layered composite and for dissimilar joining of Al to steel.". Metallurgical and Materials Transactions A 42(2011):2850–2861.
[114]Hsieh, M.J., Chiou, Y.C. and Lee, R.T., "Friction stir spot welding of low-carbon steel using an assembly-embedded rod tool". Journal of Materials Processing Technology 224(2015):149–155.
[115]Hatch, J.E., "Aluminum : properties and physical metallurgy". 1984, Metals Park, Ohio: American society for metals.
[116]Eastwood, A.E. "Gases in Non-ferrous Metals and Alloys". in American Society for Metals. 1953. Cleveland, OH, USA.
[117]Hatch, J.E., "Aluminum: Properties and Physical Metallurgy". ASM Metals Park, Ohio (1984).
[118]Hibbitt, K.S., "ABAQUS/Standard User''s Manual: Version 6.2". Vol. 2. 2001: Hibbitt, Karlsson & Sorensen Inc.
[119]Avallone, E. and Baumeister, T., "Mark''s Standard Handbook for Mechanical Engineers, 9th ed.". 1987, New York: McGraw-Hill.
[120]Nandan, R., Roy, G.G., Lienert, T.J. and Debroy, T., "Three-dimensional heat and material flow during friction stir of mild steel". Acta Materialia 55(2007):883-895.
[121]Geiger, M., Micari, F., Merklein, M., Fratini, L., Contorno, D., Giera, A. and Staud, D., "Friction stir knead welding of steel aluminum butt joints". International Journal of Machine Tools and Manufacture 48(2008):515-521.
[122]Sahin, M., "Joining of stainless-steel and aluminum materials by friction welding". The International Journal of Advanced Manufacturing Technology 41(2009):487–497.
[123]Howlader, M.M.R., Kaga, T. and Suga, T., "Investigation of bonding strength and sealing behavior of aluminum/stainless steel bonded at room temperature". Vacuum 84(2010):1334–1340.
[124]Chen, Y.C., Gholinia, A. and Prangnell, P.B., "Interface structure and bonding in abrasion circle friction stir spot welding: A novel approach for rapid welding aluminum alloy to steel automotive sheet". Materials Chemistry and Physics 134(2012):459–463.
[125]Cao, R., Yu, G., Chen, J.H. and Wang, P.C., "Cold metal transfer joining aluminum alloys -to-galvanized mild steel". Journal of Materials Processing Technology 213(2013):1753–1763.
[126]Chen, S., Huang, J., Ma, K., Zhao, X. and Vivek, A., "Microstructures and mechanical properties of laser penetration welding joint with/without Ni-foil in an overlap steel-on-aluminum configuration". Metallurgical and Materials Transactions A 45(2014):3064–3073.
[127]Chao, Y. and Qi, X., "Thermal and thermo- mechanical modeling of friction stir welding of aluminum alloy 6061-T6". Journal of Materials Processing and Manufacturing Science 7(1998):215–233.
[128]Zienkiewicz, O.C. and Cormeau, I.C., "Visco-plasticity solution by finite-element process". Archives of Mechanics 24(1972):872.
[129]Sellars, C.M. and Tegart, W.J.M., "On the mechanism of hot deformation". Acta Metallurgica 14(1966):1136.
[130]Kumar, A., Zhang, W. and DebRoy, T., "Improving reliability of modelling heat fluid flow in complex gas metal arc fillet welds". Journal of Physics D: Applied Physics 38(2005):119-126.
[131]Kong, H.S. and Ashby, M.F., "Friction-heating maps and their applications". MRS Bulletin 16(1991):41-48.
[132]Khan, J.A., Xu, L. and Chao, Y.J., "Prediction of nugget development during resistance spot welding using coupled thermal-electrical-mechanical model". Science and Technology of Welding and Joining 4(1999):201-207.
[133]Deng, Z., Lovell, M.R. and Tagavi, K.A., "Influence of material properties and forming velocity on the interfacial slip characteristics of cross wedge rolling". Journal of Manufacturing Science and Engineering 123(2001):647-653.
[134]De, A. and DebRoy, T., "Probing unknown welding parameters from convective heat transfer calculation and multivariable optimization". Journal of Physics D: Applied Physics 37(2004):140-150.
[135]De, A. and DebRoy, T., "Reliable calculations of heat and fluid flow during conduction mode laser welding through optimization of un-certain parameters". Welding Journal 84(2005):101-112.
[136]Schmidt, H. and Hattel, J., "A local model for the thermomechanical conditions in friction stir welding". Modeling and Simulation in Materials Science and Engineering 13(2005):77-93.
[137]Song, M. and Kovacevic, R., "Thermal modeling of friction stir welding in a moving coordinate system and its validation". International Journal of Machine Tools & Manufacture 43(2003):605-615.
[138]Song, M. and Kovacevic, R., "Numerical and experimental study of the heat transfer process in friction stir welding". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217(2003):73-85.
[139]Colegrove, P.A. and Shercliff, H.R., "3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile". Journal of Materials Processing Technology 169(2005):320-327.
[140]Nandan, R., Roy, G.G., Lienert, T.J. and Debroy, T., "Numerical simulation of three dimensional heat transfer and plastic flow during friction stir welding of stainless steel". Science and Technology of Welding and Joining 11(2006):526-537.
[141]黃一勛, "內嵌式工具應用於異種金屬摩擦攪拌銲接之擠壓過程中的熱傳導與材料流動之理論解析", 機械與機電工程學系. 2016, 國立中山大學.
[142]李宥均, "內嵌入式銲接工具應用於摩擦攪拌銲接過程熱傳導與材料流動之理論與實驗研究", 機械與機電工程學系. 2014, 國立中山大學.
[143]Sheppard, T. and Jackson, A., "Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys". Materials Science and Technology 13(1997):203-209.
[144]Hsieh, M.J., Lee, R.T. and Chiou, Y.C., "Friction Stir Spot Fusion Welding of Low-Carbon Steel to Aluminum Alloy". Journal of Materials Processing Technology 240(2017):118-125.