[1].Baran, W. and Knorr, M., “Synchronous Couplings with SmCo5 .Magnets,” 2nd Int. Workshop on Rare-Earth Cobalt Permanent Magnets and Their Applications, Daton, Ohio, (1976).
[2].Homreich, R. M. and Shtrikman, S., “Optimal Design of Synchronous Torque Couplings,” IEEE Transactions on Magnetics, Vol. 14, No. 5, pp. 800-802 (1978)
[3].Fellows, C. J., “Permanent Magnet Couplings,” CME June, pp. 70-84 (1979).
[4].Overshortt, K. J., “The Comparison of the Pull-out Torque of Permanent Magnet Couplings Predicted Theoretically With Experimental Measurements,” IEEE Transactions on Magnetics, Vol. 25, No. 5, PP. 3913-3915 (1989).
[5].Ferreira, C. and Vaidya, J., “Torque Analysis of Permanent Magnet Coupling Using 2D and 3D Finite Elements,” IEEE Transactions on Magnetics, Vol. 25, No. 4, PP. 3080-3082 (1989).
[6].Tan, Q. C., Xin, D., Li, W., and Meng, H., “Study on Transmitting Torque and Synchronism of Magnet Coupling,” Proceedings of the Institution of Mechanical Engineers, Vol. 206, pp. 381-384 (1992).
[7].Furlani, E. P., “A Three-Dimensional Field Solution for Radially Polarized Cylinders,” IEEE Transactions on Magnetics, Vol. 31, No. 1, pp. 844-851 (1995).
[8].Yao, Y. D., Huang, D. R., Hsieh, C. C., Chiang, D.Y, Wang, S. J. and T. F. Ying, “The RadialMagnetic Coupling Studies of Perpendicular Magnetic Gears,” IEEE Transactions on Magnetics, Vol. 32, No. 5, pp. 5061-5063 (1996).
[9].Waring, R., Hall, J., Pullen, K., and Etemad, M. R., “An Investigation of Face Type Magnetic Couplers,” Proceedings of the Institution of Mechanical Engineers, Vol. 210, pp. 263-272 (1996).
[10].Charpentier, J. F. and Lemarquand, G, “Study of Permanent-Magnet Couplings with Progressive Magnetization Using an Analytical Formulation,” IEEE Transactions on Magnetics, Vol. 35, No. 5,pp. 4206-4217 (1999).
[11].Huang, S. M., Chen, W. L., Yau, C. H., and Sung, C. K., “Effects of Misalignment on the Transmission Characteristics of Magnetic Couplings,” Proceedings of the Institution of Mechanical Engineers Pt. C: Journal of Mechanical Engineering Science, Vol. 215, pp. 227-235 (2001).
[12].Huang, S. M. and Sung, C. K., “Analytical Analysis of Magnetic Couplings with Parallelepiped Magnets,” Journal of Magnetism and Magnetic Materials, Vol. 239/1-3, pp.614-616 (2002).
[13].Thierry Lubin, Mezani Smail, Abderrezak Rezzoug, “Simple Analytical Expressions for the Force and Torque of axial Magnetic Coupling” IEEE Transactions on Energy Convertion,Institute of Electrical and Electronics, 2012
[14].Hyeon-Jae Shin, Jang-Young Choi, Seok-Myeong Jang and Kwang-Youn Lim, “Design and Analysis of Axial Permanent Magnet Coupling Based on 3D FEM” IEEE Transactions on Magnetics, Vol.49, No.7, July 2013
[15].Thierry Lubin, Mezani Smail, Abderrezak Rezzoug, “Experimental and Theoretical Analyses of Axial Magnetic Coupling Under Steady-State and Transient Operations” IEEE Transactions on Magnetics. August 2014
[16].https://zh.wikipedia.org/wiki/稀土磁鐵維基百科-稀土磁鐵,2015
[17].https://www.hkcm.de/HKCM_demag_data.php?gr=N35&l=en,2015年Neodymium (NdFeB) N35
[18].https://643708f976525313e2e4fbcf295f7c32b31bdc15.googledrive.com/host/0B-JjWwPhbJRlc0t0U3VnV0RZaEE/page-03.html弘鑫公司聯軸器,2014年
[19].陳武立“軸心偏位對磁性聯軸器傳動性能的影響”, 國立清華大學動力機械研究所碩士論文,1999年,第6~10頁[20].馮楚翔“磁性聯軸器應用於減振之可行性分析”, 國立清華大學動力機械研究所碩士論文,2007年[21].曾健偉”垂直軸磁浮風機抗載盤之扇形磁塊靜、動態穩定性分析”國立高雄海洋科技大學輪機工程研究所碩士論文,2011年[22].黃忠良,磁懸浮與磁力軸承,復漢出版社,2001年11月
[23].胡業發、周祖德、江征風,磁力軸承的基礎理論與應用,機械工業出版社,2006年3月
[24].李阿卻,切削刀具學,全華科技圖書,1991年9月,128、129頁
[25].限部淳一郎,表面加工,實教出版社,1973
[26].李適中,直流馬達速度控制、伺服系統,全華科技圖書,1990年6月
[27].陳浩,機械設計,高立圖書有限公司,1998年8月
[28].R.C. Hibbeler, “Engineering Mechanics: STATICS”, Pearson, July 2012