|
[1] B. Razavi, RF Microelectronics, Upper Saddle River, NJ: Prentice Hall, 1998 [2] A. Hajimiri and T. H. Lee, “A general theory of phase noise in electrical oscillators,” IEEE Journal of Solid-State Circuits, vol. 33, no. 2, pp. 179−194, Feb. 1998. [3] J. J. Rael and A. A. Abidi, “Physical processes of phase noise in differential LC oscillators,” IEEE Custom Integrated Circuits Conference, 2000, pp. 569−572. [4] T. Lee and A. Hajimiri, “Oscillator phase noise: a tutorial,” IEEE J. Solid-State Circuits, vol. 35, no. 3, pp. 326−336, Mar. 2000. [5] N. M. Nguyen and R. G. Meyer, “Start-up and frequency stability in high-frequency oscillators,” IEEE Journal of Solid-State Circuits, vol. 27, no. 5, pp. 810−820, May 1992. [6] B. Razavi, Design of Analog CMOS Integrated Circuits, Mc Graw Hill, 2001. [7] D. Hauspie, E.-C. Park, and J. Craninckx, “Wide-band VCO with simultaneous switching of frequency band, active core, and varactor size,” IEEE Journal of Solid-State Circuits, vol. 42, no. 7, pp. 1472–1480, Jul. 2007. [8] J. Tang and D. Kasperkovitz, Oscillator Design Efficiency: A New Figure Of Merit For Oscillator Benchmarking. [9] T. H. Lee, The Design of CMOS Radio Frequency Integrated Circuits, Cambridge University Press 1998. [10] S. Smith, Microelectronic Circuit 4th edition, Oxford University Press 1998. [11] P. Andreani, S. Mattisson, “On the use of MOS varactors in RF VCOs,” IEEE Journal of Solid-State Circuits, vol. 35, no. 6, pp. 905−910, June 2000. [12] J. Craninckx, and M. S. J. Steyaert, “A fully integrated CMOS DCS-1800 frequency synthesizer,” IEEE Journal of Solid-State Circuits, vol. 33, no. 12, pp. 2054−2065, 1998. [13] Y. K. Koutsoyannopoulos and Y. Papananos, “Systematic analysis and modeling of integrated inductors and transformers in RF IC design,” IEEE Trans. Circuits and System-II, vol. 47, no. 8, pp. 699−713, 2000. [14] A . Zolfaghari, A. Chan, and B. Razavi, “Stacked inductors and transformers in CMOS technology,” IEEE Journal of Solid-State Circuits, vol. 36, no. 4, pp. 620−628, Apr. 2001. [15] Y. Koutsoyannopoulos, “Novel Si integrated inductor and transformer structure for RF IC design,” Proc. ISCAS , vol. 2, pp. 573−576, June. 1999. [16] C. Tang, C. Wu, and S. Liu, “Miniature 3-D inductors in standard CMOS process,” IEEE Journal of Solid-State Circuits, vol. 37, no. 4, pp. 471−480, 2002 [17] H. M. Greenhouse, “Design of planar rectangular microelectronic inductors,” IEEE Trans. on Parts, Hybrids and Packaging, vol. PHP-10, no.2, pp. 101−109, 1974. [18] J. R. Long, “Monolithic transformers for silicon RF IC design,” IEEE Journal of Solid-State Circuits, vol. 35, pp. 1368−1382, Sept. 2000. [19] P. L. You and T. H. Huang, “A switched inductor topology using a switchable artificial grounded metal guard ring for wide-FTR MMW VCO applications,” IEEE Trans. Electron Devices, vol. 60, no. 2, pp. 759−766, Feb. 2013. [20] J. Lee and B. Razavi, “A 40 GHz frequency divider in 0.18μm CMOS technology,” IEEE Journal of Solid-State Circuits, vol. 39, pp. 594−601, Apr. 2004. [21] H. R. Rategh, and T.H. Lee, “Superharmonic injection-locked frequency dividers,” IEEE Journal of Solid-State Circuits, vol. 34, pp. 813−821, June 1999. [22] H. D. Wohlmuth and D. Kehrer, “A high sensitivity static 2:1 frequency divider up to 27 GHz in 120 nm CMOS,” IEEE European Solid State Circuits Conference (ESSCIRC), pp. 823−826, Sept. 2002. [23] M. Tiebout, “A 480 uW 2 GHz ultra low power dual-modulus prescaler in 0.25 um standard CMOS,” IEEE International Symposium on Circuit and System (ISCAS), vol. 5, pp. 741−744, May 2000. [24] S.-L.Jang, Y.-J. Chen, C.-H. Fang and W. C. Lai, “Enhanced locking range technique for frequency divider using dual-resonance RLC resonator,” Electronics Letters ,vol. 51, no. 23, 5 Nov. 2015, pp. 1888−1889. [25] S.-L.Jang, “Divide-by-3 injection-locked frequency dividers using dual-resonance resonator,” Analog Integr Circ Sig Process.,Vol. 85, pp 335−341, Nov., 2015. [26] S.-L. Jang, W.-C. Cheng and C.-W. Hsue, “Wide-locking range divide-by-3 injection-locked frequency divider using 6th-order RLC resonator,” IEEE Trans. Very Large Scale Integration Systems, vol. 24, no. 7, pp. 2598−2602, 2016. [27] S.-L. Jang, and Y.-L. Ciou , “Wide-band triple-resonance divide-by-4 injection-locked frequency divider,” IEEE International Microwave Symposium (IMS2017). [28] S.-L.Jang, X.-Y. Hang, and W.–T. Liu, “Review: capacitive cross-coupled injection-locked frequency dividers,” Analog Integr Circ Sig Process, pp. 97–104, 2016. [29] S.-L.Jang, and C.-Y. Lin, “A wide-locking range Class-C injection-locked frequency divider,” Electronics Letters, vol. 50, 23, pp.1710−1712, 2014. [30] Y.-H. Chuang, S.-H. Lee, R.-H. Yen, S.-L. Jang, J.-F. Lee, and M.-H. Juang, “A wide locking range and low voltage CMOS direct injection locked frequency divider,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 5, pp. 299−301, May 2006. [31] Y. Chao and H. C. Luong, “Analysis and design of wide-band millimeter-wave transformer-based VCO and ILFDs,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 63, no. 9, pp. 1416−1425, Sept. 2016. [32] S.-L. Jang, Y.-S. Chen, C.-W. Chang, and C.-C. Liu, “A wide-locking range ÷3 injection-locked frequency divider using linear mixer,” IEEE Microw. Wireless Compon. Lett., vol. 20, pp. 390−392, July, 2010. [33] C.-W. Chang, S.-L. Jang, and C.-W. Hsieh, “Wide-locking range ÷3 active-inductor injection-locked frequency divider using the push-push oscillator,” Microw. Opt. Technol. Lett., pp. 2771−2773, Dec, 2011. [34] S.-L. Jang,T.-C. Kung and C.-W. Hsue, “Wide-locking range divide-by-3 injection-locked frequency divider through enhanced 2nd harmonic,” IEEE Microw. Wireless Compon. Lett., vol. 26, No. 7, pp. 537−539, July, 2016. [35] B. Razavi, “A study of injection locking and pulling in oscillators,” IEEE J. Solid-State Circuits, vol. 39, no. 9, pp. 1415−1424, Sep. 2004. [36] H. Wu and L. Zhang, “A 16-to-18GHz 0.18μm epi-CMOS divide-by-3injection-locked frequency divider,” IEEE ISSCC Dig. Tech. Papers, Feb. 2006, pp. 27–29. [37] S.-L. Jang, and C.-W. Chang, “A 90nm CMOS LC-tank divide-by-3 injection-locked frequency divider with record locking range,” IEEE Microw. Wireless Compon. Lett., vol. 20, pp. 229−231, April, 2010. [38] Y.-T. Chen, M.-W. Li,H.-C. Kuo, T.-H. Huang, and H.-R. Chuang, “Low-voltage K-band divide-by-3 injection-locked frequency divider with floating-source differential injector,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 1, pp. 160–67, 2012. [39] S.-L.Jang and C.-Y. Chuang, “Wide-locking range ÷3 series-tuned injection-locked frequency divider,” Analog Integr CircSig Process.,vol. 76, Issue 1, pp. 111−116, 2013. [40] S.-L.Jang, and C.-Y. Lin, “A wide-locking range Class-C injection-locked frequency divider,” Electronics Letters., vol. 50, 23, pp. 1710−1712, 2014. [41] S.-L.Jang, C.-Y. Lin and M.-H. Juang, “Enhanced locking range technique for a divide-by-3 differential injection-locked frequency divider,” Electronics Letters., vol. 51, 6, 19 March 2015, pp. 456−458. [42] S.-L.Jang, T.-C. Kung and C.-W. Hsue, “Wide-locking range divide-by-3 injection-locked frequency divider through enhanced 2nd harmonic,” IEEE Microw. Wireless Compon. Lett., vol. 27, no. 7, 2016. [43] S.-L.Jang, and J.-H. Hsieh, “A wide-locking range ÷3 injection-locked frequency divider using concurrent injection mechanisms,” Analog Integrated Circuit Signal Process., Vol. 77, pp. 593−598, 2013. [44] Shih-Jie Jian, “Design of wide locking range divide-by-3 injection-locked frequency divider and injection-locked frequency divider using 6th-order RLC resonator, ” Master thesis, National Taiwan University of Science and Technology, 2016. [45] Yu-Sheng Chen, “Fully-Integrated Wide-Locking Range ÷3 Push-Push Injection-Locked Frequency Divider,” Lot No.T18-99B-81, CIC Tapeout T18-99B, 10 May 2010. [46] Chia-Nan Hung, “Research of injection-locked frequency dividers and low voltage voltage-controlled-oscillators,” Master thesis, National Taiwan University of Science and Technology, 2009. [47] Toru Masuda, “A Simplified Distribution Parasitic Capacitance Model for On-Chip Spiral Inductors,” Silicon Monolithic Integrated Circuits in RF Systems, San Diego, CA, USA, 18-20 Jan. 2006.
|