[1] R. N. Hall, G. E. Fenner, J. D. Kingsley, T. J. Soltys, and R. O. Carlson, “Coherent light emission from GaAs junctions,” Physical Review Letters, vol. 9, no. 9, pp. 366-368, Nov. 1962.
[2] J. Cardes, D. Garc, L. a, L. E, et al., “Low Cost Intelligent LED Driver for Public Lighting Smart Grids,” in New Concepts in Smart Cities: Fostering Public and Private Alliances (SmartMILE), 2013 International Conference on, pp. 1-6, 2013.
[3] Ray-Lee Lin, and Yi-Fan Chen, “Equivalent Circuit Model of Light-Emitting-Diode for System Analyses of Lighting Drivers,” IEEE Conference on IAS Annual meeting, pp. 1-5, 2009.
[4] L. Bor-Ren, W. Ta-Chang, and C. Huann-Keng, “Novel AC Line Conditioner for Power Factor Correction,” IEEE Transactions on Aerospace and Electronic Systems, vol. 40, pp. 168-179, 2004.
[5] Ray-Lee Lin, Chia-Chun Lee, and Shun-Yao Liu, “Taylor series expression based equivalent circuit model of LEDs for analysis of LED drivers system,” IEEE Conference on IAS Annual meeting, pp. 1-7, 2011.
[6] W. Huai and I. Batarseh, “Comparison of Basic Converter Topologies for Power Factor Correction,” in Southeastcon '98. Proceedings. IEEE, pp. 348-353, 1998.
[7] C. A. Gallo, F. L. Tofoli, and J. A. C. Pinto, “Two-Stage Isolated Switch-Mode Power Supply with High Efficiency and High Input Power Factor,” IEEE Transactions on Industrial Electronics, vol. 57, pp. 3754-3766, 2010.
[8] “Power factor correction (PFC) handbook, Rev. 5,” ON Semiconductor, 2014.
[9] L. Zheren and K. M. Smedley, “A Family of Continuous Conduction Mode Power Factor Correction Controllers Based on the General Pulse-Width Modulator,” IEEE Transactions on Power Electronics, vol. 13, pp. 501-510, 1998.
[10] K. Yao, X. Ruan, X. Mao, and Z. Ye, “Variable-Duty-Cycle Control to Achieve High Input Power Factor for DCM Boost PFC Converter,” IEEE Transactions on Industrial Electronics, vol. 58, pp. 1856-1865, 2011.
[11] L. Huber, B. T. Irving, and M. M. Jovanovic, “Effect of Valley Switching and Switching-Frequency Limitation on Line-Current Distortions of DCM/CCM Boundary Boost PFC Converters,” IEEE Transactions on Power Electronics, vol. 24, pp. 339-347, 2009.
[12] Y. Hu, L. Huber, M. M. Jovanovi, and x, “Single-Stage, Universal-Input AC/DC LED Driver with Current-Controlled Variable PFC Boost Inductor,” IEEE Transactions on Power Electronics, vol. 27, pp. 1579-1588, 2012.
[13] T. Yan, J. Xu, F. Zhang, J. Sha, and Z. Dong, “Variable-On-Time-Controlled Critical-Conduction-Mode Flyback PFC Converter,” IEEE Transactions on Industrial Electronics, vol. 61, pp. 6091-6099, 2014.
[14] L. Zheren and K. M. Smedley, “A Family of Continuous Conduction Mode Power Factor Correction Controllers Based on the General Pulse-Width Modulator,” IEEE Transactions on Power Electronics, vol. 13, pp. 501-510, 1998.
[15] K. Yao, X. Ruan, X. Mao, and Z. Ye, “Variable-Duty-Cycle Control to Achieve High Input Power Factor for DCM Boost PFC Converter,” IEEE Transactions on Industrial Electronics, vol. 58, pp. 1856-1865, 2011.
[16] L. Huber, B. T. Irving, and M. M. Jovanovic, “Effect of Valley Switching and Switching-Frequency Limitation on Line-Current Distortions of DCM/CCM Boundary Boost PFC Converters,” IEEE Transactions on Power Electronics, vol. 24, pp. 339-347, 2009.
[17] L. Rossetto, G. Spiazzi, and P. Tenti, “Control Techniques for Power Factor Correction Converter,” In Proc. PEMC, pp. 1310-1318, Sept 1994.
[18] 吳義利,切換式電源轉換器 原理與實用設計技術 (實例設計導向),2 ed.: 文笙書局,2015。
[19] D. W. Hart and S. Y. Ou, Power Electronics, Annotated ed.: McGraw-Hill, 2011.
[20] STMicroelectronics, “Design Equations of High-Power-Factor Flyback Converters Based On the L6561,” Application Note, AN1059, September 2003.
[21] Mladen Ivankovic, Infineon Technologies North America (IFNA) Corp, “CrCM Flyback PFC Converter Design,” Design Note, V1.0, January 2013.
[22] Michael Weirich, Fairchild Semiconductor, “A High Power Flyback with Constant-Current Output for LED Lighting Applications,” The Global Power ResourceSM Center (GPRC) Europe, 2010.
[23] Leadtrend Technology Corporation, LD7830 Datasheet, Rev. 01a, Aug. 2012.
[24] L. Yang, X. Zhou, and A. Huang, “Design of a Transition Mode Controller for Flyback Converters,” in 2009 International Conference on Power Electronics and Drive Systems (PEDS), pp. 1188-1193, 2009.
[25] D. G. Lamar, M. Arias, M. M. Hernando, and J. Sebastian, “Using the Loss-Free Resistor Concept to Design a Simple AC-DC HB-LED Driver for Retrofit Lamp Applications,” IEEE Transactions on Industry Applications, vol. 51, pp. 2300-2311, 2015.
[26] M. S. Shur and R. Zukauskas, “Solid-State Lighting: Toward Superior Illumination,” Proceedings of the IEEE, vol. 93, pp. 1691-1703, 2005.
[27] N. Chen and H. S. H. Chung, “A Driving Technology for Retrofit LED Lamp for Fluorescent Lighting Fixtures with Electronic Ballasts,” IEEE Transactions on Power Electronics, vol. 26, pp. 588-601, 2011.
[28] (Aug 24, 2004). Why Drive White LEDs with Constant Current? Available:
https://www.maximintegrated.com/en/app-notes/index.mvp/id/3256
[29] W. Hongmin, L. Zhili, and D. Jing, “High-Power LED Constant-Current Driver Circuit Design and Efficiency Analysis,” in Cross Strait Quad-Regional Radio Science and Wireless Technology Conference (CSQRWC), pp. 705-710, 2011.
[30] 林煒翔,「返馳式轉換器在低功率LED照明應用」,碩士,電機工程系,國立雲林科技大學,雲林縣,2013。[31] 陳逸凡,「發光二極體升壓型驅動電路之系統模型建構」,碩士,電機工程系,國立成功大學,台南市,2009。[32] Ray-Lee Lin, Shun-Yao Liu, Chia-Chun Lee, and Yi-Chun Chang, “Taylor-Series-Expression-Based Equivalent Circuit Models of LED for Analysis of LED Driver System,” IEEE Transactions on Industry Applications, vol. 49, pp. 1854-1862, 2013.
[33] Ray-Lee Lin, Jhong-Yan Tsai, Shun-Yao Liu, and Hsin-Wei Chiang, “Optimal Design of LED Array Combinations for CCM Single-Loop Control LED Drivers, ” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, pp. 609-616, 2015.
[34] Ray-Lee Lin, Yi-Chun Chang, and Chia-Chun Lee, “Optimal Design of LED Array for Single-Loop CCM Buck-Boost LED Driver,” IEEE Transactions on Industry Applications, vol. 49, pp. 761-768, 2013.
[35] Ray-Lee Lin, Jhong-Yan Tsai, J. M. Alonso, and D. Gacio, “Four-Parameter Taylor Series-Based Light-Emitting-Diode Model,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, pp. 581-588, 2015.
[36] Peter Baureis, “Compact modeling of electrical, thermal and optical LED behavior er,” Proceedings of ESSDERC, pp. 145-148, 2005.
[37] Cree Incorporation, XLamp ML-E Datasheet, Rev. 11F, 2010.
[38] 胡宏新,「半橋LLC諧振轉換器效率改善與系統研製」,碩士,電機工程系,國立臺灣科技大學,台北市,2015。[39] X. Wu, J. Yang, J. Zhang, and M. Xu, “Design Considerations of Soft-Switched Buck PFC Converter with Constant On-Time (COT) Control,” IEEE Transactions on Power Electronics, vol. 26, pp. 3144-3152, 2011.
[40] C. Tzuen-Lih, L. Li-Hsiang, H. Ching-Nan, C. Yu-Lun, and K. Jao-Hwa, “High Power Factor Flyback Converter for LED Driver with Boundary Conduction Mode Control,” in 2010 5th IEEE Conference on Industrial Electronics and Applications, pp. 2088-2093, 2010.
[41] B. White, H. Wang, Y. F. Liu, and X. Liu, “An Average Current Modulation Method for Single-Stage LED Drivers with High Power Factor and Zero Low-Frequency Current Ripple,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, pp. 714-731, 2015.
[42] P. Fang, Y. F. Liu, and P. C. Sen, “A Flicker-Free Single-Stage Offline LED Driver with High Power Factor,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, pp. 654-665, 2015.
[43] K. I. Hwu, Y. T. Yau, and L. L. Lee, “Powering LED Using High-Efficiency SR Flyback Converter,” IEEE Transactions on Industry Applications, vol. 47, pp. 376-386, 2011.
[44] 吳律凱,「具同步整流功能之返馳式轉換器研製」,碩士,電機工程系,國立臺灣科技大學,台北市,2015。[45] 蔡右平,「高效率可調光之返馳式轉換器研製」,碩士,電機工程系,國立臺灣科技大學,台北市,2016。[46] 蔡宇宏,「準諧振控制電路及初次側調整控制器在充電器應用之研製」,碩士,電機工程系,國立臺灣科技大學,台北市,2017。[47] 鄒明璋,「抑制電能轉換器傳導EMI之新型抖頻技術」,博士, 電機工程系,國立臺灣科技大學,台北市,2015。