|
1. J.H. Song, R.J.Murphy, R.Narayan, G.B.H.Davies, “Biodegradable and compostable alternatives to conventional plastics,” Philosophical Transactions of the Royal Society, 364: 2127–2139(2009). 2. R.Jain, A.Tiwari, “Biosynthesis of planet friendly bioplastics using renewable carbon source,” Journal of Environmental Health Science & Engineering, 13: 11(2015). 3. V.Siracusa, P.Rocculi, S.Romani, M.D.Rosab, “Biodegradable polymers for food packaging: a review,” Trends in Food Science and Technology, 19: 634–643(2008). 4. 李吉祥、蔡金英、鄭旭軒、許順珠、楊奉儒,「綠色化學技術於工研院研發現況」,工業技術研究院 專題研究,(2008)。 5. V.Urtuvia, P.Villegas, M.González, M.Seeger, “Bacterial production of the biodegradable plastics polyhydroxyalkanoates,” International Journal of Biological Macromolecules, 70: 208–213(2014). 6. M.Okada, “Chemical syntheses of biodegradable polymers.” Progress in Polymer Science, 27: 87–133(2002). 7. J.Scheller, U.Conrad, “Plant-based material, protein and biodegradable plastic,” Current Opinion in Plant Biology, 8: 188–196(2005). 8. 蘇明德,「能自動分解的塑膠—可降解塑膠」,科學發展,448: 64–67(2010)。 9. 楊紹榮,「分解性塑膠在農業栽培之評估」,台南區農業專訊,3: 14–16(1993)。 10. 王榮基、許垤棋、翁茂盛、吳政達、劉美君、游俊凱、甘魯生,「愛護地球的新夥伴“綠色環保塑膠”」,綠能及綠色化學電子月刊,大同大學生物工程學系,5: 15–19(2010)。 11. B.D.Wilde, “International and national norms on biodegradability and certification procedures,” Handbook of Biodegradable Polymers, 5: 145-182(2005). 12. Y.Tokiwa, B.P.Calabia, C.U.Ugwu, S.Aiba, “Biodegradability of plastics,” International Journal of Molecular Sciences, 10: 3722-3742(2009). 13. A.J.R.Lasprilla, G.A.R.Martinez, B.H.Lunelli, A.L.Jardini, R.M.Filho, “Poly-lactic acid synthesis for application in biomedical devices—A review,” Biotechnology Advances, 30: 321–328(2012). 14. M.S.Lopes, A.L.Jardini, R.M.Filho, “Poly (lactic acid) production for tissue engineering applications,” Procedia Engineering, 42: 1402–1413(2012). 15. L. Jiang, J.Zhang, “Biodegradable and biobased polymers,” Applied Plastics Engineering Handbook, 9: 145–158(2011). 16. F.Achmad, K.Yamane, S.Quan, T.Kokugan, “Synthesis of polylactic acid by direct polycondensation under vacuum without catalysts, solvents and initiators,” Chemical Engineering Journal, 151: 342–350(2009). 17. L.Ave´rous, “Synthesis, properties, environmental and biomedical applications of polylactic acid,” Handbook of Biopolymers and Biodegradable Plastics, 9: 171–188(2013). 18. M.S.Lopes, A.L.Jardini, R.M.Filho, “Synthesis and characterizations of poly (lactic acid) by ring-opening polymerization for biomedical applications,” Chemical Engineering Transactions, 38: 331–336(2014). 19. F.A.C.Martinez, E.M.Balciunas, J.M.Salgado, J.M.D.Gonzalez, A.Converti, R.P.Oliveira, “Lactic acid properties, applications and production: a review,” Trends in Food Science and Technology, 30: 70–83(2013). 20. K.M.Nampoothiri, N.R.Nair, R.P.John, “An overview of the recent developments in polylactide (PLA) research,” Bioresource Technology, 101: 8493–8501(2010). 21. S.R.Rathi, E.B.Coughlin, S.L.Hsu, C.S.Golub, G.H.Ling, M.J.Tzivanis, “Maintaining structural stability of poly(lactic acid): effects of multifunctional epoxy based reactive oligomers,” Polymers, 6: 1232–1250(2014). 22. S.J.Huang, “Poly(lactic acid) and copolyesters,” Handbook of Biodegradable Polymers, 9: 287−302(2005). 23. N.Reddy, D.Nama, Y.Yang, “Polylactic acid/polypropylene polyblend fibers for better resistance to degradation,” Polymer Degradation and Stability, 93: 233–241(2008). 24. P.Haque, A.J.Parsons, I.A.Barker, I.Ahmed, D.J.Irvine, G.S.Walker, C.D.Rudd, “Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents,” Composites Science and Technology, 70: 1854–1860(2010). 25. Z.N.Terzopoulou, G.Z.Papageorgiou, E.Papadopoulou, E.Athanassiadou, E.Alexopoulou, D.N.Bikiaris, “Green composites prepared from aliphatic polyesters and bast fibers,” Industrial Crops and Products, 68: 60–79(2015). 26. 許明發、郭文雄,「複合材料纖維學」,全威圖書(2002)。 27. S.M.Hejazi, M.Sheikhzadeh, S.M.Abtahi, A.Zadhoush, “A simple review of soil reinforcement by using natural and synthetic fibers,” Construction and Building Materials, 30: 100–116(2012). 28. A.L.Frank, T.K.Joshi, “The global spread of asbestos,” Annals of Global Health, 80: 257–262(2014). 29. G.I.Williams, R.P.Wool, “Composites from natural fibers and soy oil resins,” Applied Composite Materials, 7: 421–432(2000). 30. V.Brulé, A.Rafsanjani, D.Pasini, T.L.Westerna, “Hierarchies of plant stiffness,” Plant Science, 250: 79–96(2016). 31. 游振宗,「天然纖維素纖維」,超級科技圖書(1989)。 32. A.C.O'sullivan, “Cellulose: the structure slowly unravels," CELLULOSE, 4: 173–207(1997). 33. H.Kang, R.Liu, Y.Huang, “Graft modification of cellulose: Methods, properties and applications,” Polymer, 70: A1–A16(2015). 34. K.Werner, L.Pommer, M.Broström, “Thermal decomposition of hemicelluloses,” Journal of Analytical and Applied Pyrolysis, 110: 130–137(2014). 35. H.V.Scheller, P.Ulvskov, “Hemicelluloses,” Annual Review of Plant Biology, 61: 263–289(2010). 36. R.Junli, P.Xinwen, Z.Linxin, P.Feng, S.Runcang, “Novel hydrophobic hemicelluloses: Synthesis and characteristic,” Carbohydrate Polymers, 89: 152–157(2012). 37. M.Norgren, H.Edlund, “Lignin: recent advances and emerging applications,” Current Opinion in Colloid and Interface Science, 19: 409–416(2014). 38. L.R.Adetunji, A.Adekunle, V.Orsat, V.Raghavan, “Advances in the pectin production process using novel extraction techniques: A review,” Food Hydrocolloids, 62: 239–250(2017). 39. O.Faruk, A.K.Bledzki, H.P.Fink, M.Sain, “Biocomposites reinforced with natural fibers: 2000–2010,” Progress in Polymer Science, 37: 1552–1596(2012). 40. V.Brulé, A.Rafsanjani, D.Pasini, T.L.Westerna, “Hierarchies of plant stiffness,” Plant Science, 250: 79–96(2016). 41. S.Gharehkhania, E.Sadeghinezhad, S.N.Kazi, H.Yarmand, A.Badarudin, M.R.Safaei, M.N.Zubir, “Basic effects of pulp refining on fiber properties—A review,” Carbohydrate Polymers, 115: 785–803(2015). 42. L.Yan, N.Chouw, K.Jayaraman, “Flax fibre and its composites – A review,” Composites: Part B, 56: 296–317(2014). 43. M.A.Rahman, F.Parvin, M.Hasan, M.E.Hoque, “Introduction to manufacturing of natural fibre-reinforced polymer composites,” Manufacturing of Natural Fibre Reinforced Polymer Composites, 2: 17–43(2015). 44. C.Y.Ragasa, Jr.V.Ebajo, M.M.Reyes, E.H.Mandia, M.C.S.Tan, R.Brkljača, S.Urban, “Chemical constituents of cordia dichotoma G. Forst,” Journal of Applied Pharmaceutical Science, 5(2): 16-21(2015). 45. J.Jayaramudu, A.Maity, E.R.Sadiku, B.R.Guduric, A.V.Rajulu, CH.V.V.Ramana, R.Li, “Structure and properties of new natural cellulose fabrics from cordia dichotoma,” Carbohydrate Polymers, 86: 1623–1629(2011). 46. A.Aberoumand, “Assessment of proximate and phytochemical composition for evaluation of nutritive values of some plant foods obtained from Iran and India,” Research in Organic Farming, 4: 59-70(2011). 47. R.Khandelwal, S.Sahu, S.K.Arora, S.P.A.Mathur, “Green approach for corrosion prevention,” International Journal of Chemistry and Chemical Engineering, 3(3): 197-200(2013). 48. R.Singh, R.D.Lawania, A.Mishra, R.Gupta, “Role of cordia dichotomaseeds and leaves extract in degenerative disorders,” International Journal of Pharmaceutical Sciences Review and Research, 2: 21–24(2010). 49. 毛賢宗,「破布子栽培及加工利用」,台南區農業專訊,9: 7–9(1994)。 50. 何哲良,「台商引進破布子新品種在海南種植」,海峽科技與產業,5: 28(2003)。 51. B.S.Baek, J.W.Park, B.H.Lee, H.J.Kim, “Development and application of green composites: Using coffee ground and bamboo flour,” Journal of Polymers and the Environment, 21: 702–709(2013). 52. 費燕娜、高衛東、王鴻博、王銀利、陳艷,「茶多酚/聚乳酸複合納米纖維膜的製備及抗菌性能研究」,材料導報,24: 42–45(2010)。 53. L.Wang, Z.Tong, L.O.Ingram, Q.Cheng, S.Matthews, “Green composites of poly (lactic acid) and sugarcane bagasse residues from bio-refinery processes,” Journal of Polymers and the Environment, 21: 780–788(2013). 54. R.Jain, A.Tiwari, “Biosynthesis of planet friendly bioplastics using renewable carbon source,” Journal of Environmental Health Science and Engineering, 13: 11(2015). 55. J.M.Urreaga, S.C.Gonzalez, A.A.Martinez, V.C.Fonseca, J.Acosta, M.U.Orden, “Sustainable eco-composites obtained from agricultural and urban waste plastic blends and residual cellulose fibers,’ Journal of Cleaner Production, 108: 377–384(2015). 56. M. Bulota, T.Budtova, “PLA/algae composites: Morphology and mechanical properties,” Composites: Part A, 73: 109–115(2015). 57. I.S.M.A.Tawakkal, M.J.Cran, S.W.Bigger, “Effect of kenaf fibre loading and thymol concentration on the mechanical and thermal properties of PLA/kenaf/thymol composites,” Industrial Crops and Products, 61: 74–83(2014). 58. Y.Dong, A.Ghataura, H.Takagi, H.J.Haroosh, A.N.Nakagaito, K.T.Lau, “Polylactic acid (PLA) biocomposites reinforced with coir fibres: Evaluation of mechanical performance and multifunctional properties,” Composites: Part A, 63: 76–84(2014). 59. M.R.Manshora, H.Anuar, M.N.Nur Aimi, M.I.Ahmad Fitrie, W.B.Wan Nazri, S.M.Sapuan, Y.A.El-Shekeil, M.U.Wahit, “Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites,” Materials and Design, 59: 279–286(2014). 60. W.Sujaritjun, P.Uawongsuwan, W.Pivsa-Art, H.Hamada, “Mechanical property of surface modified natural fiber reinforced PLA biocomposites,” Energy Procedia, 34: 664 – 672(2013). 61. J.Jayaramudu, G.S.M.Reddy, K.Varaprasad, E.R.Sadiku, S.S.Ray, A.V.Rajulu, “Structure and properties of poly (lactic acid)/sterculia urens uniaxial fabric biocomposites,” Carbohydrate Polymers, 94: 822–828(2013). 62. K.Halake, H.J.Kim, M.Birajdar, B.S.Kim, H.Bae, C.C.Lee, Y.J.Kim, S.Kim, S.Ahn, S.Y.An, S.H.Jung, J.Lee, “Recently developed applications for natural hydrophilic polymers,” Journal of Industrial and Engineering Chemistry, 40: 16–22(2016). 63. C.Koning, M.V.Duin, C.Pagnoulle, R.Jerome, “Strategies for compatibilization of polymer blends,” Progress in Polymer Science, 23: 707–757(1998). 64. J.K.Fink, “Grafting,” Reactive Polymers Fundamentals and Applications, 18: 425–452(2013). 65. J.L.Williams, V.Stannett, L.G.Roldan, S.B.Sello, G.V.Stevens, “Graft copolymers as elastomeric fibers --II. Mechanical properties and mor- phology of grafted copolymers,” International Journal of Applied Radiation and Isotopes, 26: 169–178(1975). 66. N.Dharmarajan, S.Datta, G.Ver Strate, L.Ban, “Compatibilized polymer blends of isotactic polypropylene and styrene-maleic anhydride copolymer,” Polymer, 36(20): 3849–3861(1995). 67. B.Ohlsson, H.Hassander, B.Tornell, “Improved compatibility between polyamide and polypropylene by the use of maleic anhydride grafted SEBS,” Polymer, 39(26): 6705–6714(1998). 68. H.D.Rozman, K.W.Tan, R.N.Kumar, A.Abubakar, Z.A.M.Ishak, H.Ismail, “The effect of lignin as a compatibilizer on the physical properties of coconut fiber–polypropylene composites,” European Polymer Journal, 36: 1483–1494(2000). 69. H.K.Jeon, B.J.Feist, S.B.Koh, K.Chang, C.W.Macosko, R.P.Dion, “Reactively formed block and graft copolymers as compatibilizers for polyamide 66/PS blends,” Polymer, 45: 197–206(2004). 70. S.Sangthong, T.Pongprayoon, N.Yanumet, “Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers,” Composites: Part A, 40: 687–694(2009). 71. Q.Shi, C.Chen, L.Gao, L.Jiao, H.Xu, W.Guo, “Physical and degradation properties of binary or ternary blends composed of poly (lactic acid), thermoplastic starch and GMA grafted POE,” Polymer Degradation and Stability, 96: 175–182(2011). 72. V.K.Thakur, M.K.Thakur, R.K.Guptac, “Graft copolymers of natural fibers for green composites,” Carbohydrate Polymers, 104: 87–93(2014). 73. B.A.Khan, V.S.Chevali, H.Na, J.Zhu, P.Warner, H.Wang, “Processing and properties of antibacterial silver nanoparticle-loaded hemp hurd/poly(lactic acid) biocomposites,” Composites Part B, 100: 10–18(2016). 74. W.Yang, F.Dominici, E.Fortunati, J.M.Kenny, D.Puglia, “Effect of lignin nanoparticles and masterbatch procedures on the final properties of glycidyl methacrylate-g-poly (lactic acid) films before and after accelerated UV weathering,” Industrial Crops and Products, 77: 833–844(2015). 75. K.Z.Elwakeela, E.Guibal, “Potential use of magnetic glycidyl methacrylate resin as a mercury sorbent: From basic study to the application to wastewater treatment,” Journal of Environmental Chemical Engineering, 4: 3632–3645(2016). 76. J.F.Turner, A.Riga, A.O’Connor, J.Zhang, J.Collis, “Characterization of drawn and undrawn poly-L-lactide films by differential scanning calorimetry,” Chemistry Faculty Publications, 303: 257–268(2004). 77. V.H.Orozco, W.Brostow, W.Chonkaew, B.L.Lo´pez, “Preparation and characterization of poly(lactic acid)-g-maleic anhydride starch blends,” Macromolecular Symposia, 277: 69–80(2009). 78. B.A.Khan, H.Na, V.Chevali, P.Warner, J.Zhu, H.Wang, “Glycidyl methacrylate-compatibilized poly(lactic acid)/hemp hurd biocomposites: Processing, crystallization, and thermo-mechanical response,” Journal of Materials Science & Technology, (2017). 79. H.Macková, F.Oukacine, Z.Plichta, M.Hruby´, J.Kucˇka, M.Taverna, D.Horák, “Poly(glycidyl methacrylate)/silver nanocomposite microspheres as a radioiodine scavenger: Electrophoretic characterisation of carboxyl-and amine-modified particles,” Journal of Colloid and Interface Science, 421: 146–153(2014). 80. F.A.Santos, M.I.Tavares, “Development and characterization of hybrid materials based on biodegradable PLA matrix, microcrystalline cellulose and organophilic silica,” Polímeros, 24(5): 561−566(2014).
|