跳到主要內容

臺灣博碩士論文加值系統

(44.222.189.51) 您好!臺灣時間:2024/05/18 17:28
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:古烜瑜
研究生(外文):KU,HSUAN-YU
論文名稱:陽極氧化薄膜顏色與厚度分析
論文名稱(外文):Analysis of Color and Thickness of Anodic Oxidation Film
指導教授:陳建仲陳建仲引用關係
指導教授(外文):CHEN,CHIEN-CHUNG
口試委員:陳建仲陳志遠李陸玲洪千萬白清源
口試委員(外文):CHEN,CHIEN-CHUNGCHEN,CHIH-YUANLI,LU-LINGHUNG,CHIEN-WANPAI,CHING-YUAN
口試日期:2017-06-23
學位類別:碩士
校院名稱:國立聯合大學
系所名稱:能源工程學系碩士班
學門:工程學門
學類:綜合工程學類
論文種類:學術論文
論文出版年:2017
畢業學年度:105
語文別:中文
論文頁數:72
中文關鍵詞:陽極處理
外文關鍵詞:Anodization
相關次數:
  • 被引用被引用:0
  • 點閱點閱:324
  • 評分評分:
  • 下載下載:8
  • 收藏至我的研究室書目清單書目收藏:0
鋁是一種資源豐富的物質因為產量多而常被使用,而鋁合金也是常被使用的一種,從1字頭至8字頭有著各式各樣的鋁合金種類,有鋁銅、鋁鎂、鋁錳等不同種類,其中本實驗運用6061鋁合金做表面處理,總共分三大部分機器研磨、電解拋光、陽極處理等步驟。
陽極處理是一個成熟的技術可使金屬表面長出陽極薄膜,薄膜結構有著奈米孔洞的致密薄膜且薄膜厚度及孔洞大小顏色可隨陽極處理的時間長短和不同電解液所改變,而本實驗運用硫酸與磷酸當陽極處理藥水,再陽極處理中的改變電壓參數使6061鋁合金產生多種顏色,當試片完成後會運用薄膜量測儀去做量測再把顏色做數據化使顏色能更清楚的表示之。這邊採用國際照明委員會提出的LAB做顏色的區別此方法有別於傳統的RGB效果要好誤差較小。當數據運算後可帶入各種有關色彩的公式去驗證顏色的變化程度例如彩度、色相角等數值。還有在不同電壓溶液下生長的薄膜厚度比較。

Aluminum is a rich raw material,Because of lot production so it has often to be used. The aluminum alloy is also often used too, from 1 to 8 prefix has a wide variety of aluminum alloy,like Al-Cu,Al-Mn,Al-Mg,etc.
This experiment uses 6061 aluminum alloy to do the surface treatment, altogether divides three major parts first mechanical polishing,electrolytic polishing,anodization.

Anodic treatment is a mature technique it can grow anodic film on the metal surface, The film structure has a nano-hole it Covered with all the range, the film thickness hole size Colour can be changed with the time of the anode treatment and different electrolyte. This experiment uses sulfuric acid and phosphoric acid on Anodic treatment, Change the voltage parameter in the anode treatment made 6061 aluminum alloy produce a variety of colors, Then use the thin film measuring instrument to do the measurement and then set up the color data.we use LAB witch proposed by International Commission on illumination, we use LAB is better than RGB it can reduce the errors,when the data was be found we can Calculation the hue-angleand chroma to discuss how it change. There are also discuss thin film thicknesses grown in different voltage solutions.

摘要
英文摘要
目錄
表目錄
圖目錄
第一章前言
第二章原理與文獻回顧
2.1四大電化學的介紹
2.2陽極處理
2.3鋁的表面處理
2.4鋁陽極氧化膜
2.5電解液對陽極氧化鋁的薄膜生長
2.6時間對陽極氧化鋁孔洞之影響
2.7電壓對陽極氧化鋁孔洞之影響
第三章實驗方法
3.1實驗設備
3.2實驗藥品
3.3實驗數據的色彩標準定義
3.4實驗步驟
第四章 結果與討論
4.1 6061鋁合金電解拋光之成效
4.2二種酸的顏色數據
4.2.1硫酸試片圖
4.2.2磷酸試片圖
4.3二種酸的薄膜生長數值
4.4探討陽極薄膜的色彩
第五章 結論
參考文獻
附件


1.Lin, J. S., Chen, S. H., Huang, K. J., Hun, C. W., &Chen, C. C. (2015). Challenges to Fabricate Large Size-Controllable Submicron- Structured Anodic-Aluminum-Oxide Film. Atlas Journal of Materials Science, 2(2),p. 65–72.
2.Chen, C. C., Chung, H. W., Chen, C. H., Lu, H. P., Lan, C. M., Chen, S. F., …Diau, E. W. G. (2008). Fabrication and characterization of anodic titanium oxide nanotube arrays of controlled length for highly efficient dye-sensitized solar cells. Journal of Physical Chemistry C, 112(48), p.19151–19157.
3.Chen, C. C., Chung, H. W., Chen, C. H., Lu, H. P., Lan, C. M., Chen, S. F., …Diau, E. W. G. (2008). Fabrication and characterization of anodic titanium oxide nanotube arrays of controlled length for highly efficient dye-sensitized solar cells. Journal of Physical Chemistry C, 112(48), p.19151–19157.
4.Services, H., Abstracts, C., Data, A., Alkaloids, M., &Abstracts, C. (1997). United States Patent [ 191,p. 3–5.
5.Surface, D. O., Heating, I. I., Ziesenheim, W., &Orkin, L. (2004). United States No.: 2004/0229079 A1 , 1(19), p.1–5.
6.Affairs, P. (2003). J a a : a h r, 16(3), p543–554.
7.Technology, E. (2014). Study on the Corrosion Resistance of Anodically Oxidized Aluminum Coating to Fluoride Ion, p.27–33.
8.拉絲加工金合星工業有限公司httpwww.chinhohsing.com.twla-si-jia-gong
9.Yuqiong, L. I., Zhinong, Y. U., Wei, X. U. E., &Jian, L. (n.d.). The electrolytic polishing of flexible display steel substrate, (1), p.145–147.
10.林金雄(Study of Electropolishing on Aluminum Surface)鋁表面之電解拋光研究. (n.d.).
11.王釧如(2015)“The Study of Nano-Template Assistance in Cesium Iodide Scintillator Fabrication National Union University
12.Kao, M. J., Chang, S. F., Chen, C. C., &Kuo, C. G. (2012). The Surface Adsorption of Nano-pore Template, 6(5), p.800–803.
13.M.D.Fairchild Color Appearance Models, Color AppearanceModels, Addison Wesley Longman, Inc. (1998), p.222.
14. Y. J. Wu, K. Dong, C. Feng, and P. X. Zhang, (2010). Fabrication of anodic aluminum oxide template with large pore diameter in citric acid, Journal of Kunming University of Science and Technology,Vol. 35, No. 5.
15.Technology, E. (2014). Study on the Corrosion Resistance of Anodically Oxidized Aluminum Coating to Fluoride Ion,p. 27–33.
16.M. A. H., (1929). Munsell Book of Color, Munsell Color Company, standard edition,.
17.H. Masuda, H. Yamada, M. Satoh, et al. (1997), Appl. Phys. Lett., 71, 2770.
18.H. Masuda, F. Hasegwa, J.Electrochem.Soc. (1997), L127 , 144.
19.R.W.G Hunt, (2000).Colour Order Systems: The Munsell Book ofColor,Measuring Colour, Fountain Pr Ltd, 3rd ed., p. 138-140.
20.M. D. Fairchild, (1998).Color Appearance Models,Color AppearanceModels, Addison Wesley Longman, Inc., p.215-230.
21.Space, U. C., &Vision, H. (n.d.). Uniform Color Space for Human Vision . 6~8頁(2007)
22.F. Keller, M. S. Hunter, and D. L. Robinson, J. Electrochem. (1953) Soc., , 100, 411.
23.G.E Thompson, (1997).Porous anodic alumina: Fabrication, characterisation and application, Thin Solid Films,Vol.297,Iss. 1-2 ,p192~201,.
24.T.P. Hoar, J. Yahaloom, (1963), The initiation of pores in anodic oxide films formed on aluminium in acid solutions,Journal of Electrochemical Society, Vol.110,No.6,pp 614-621.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top