跳到主要內容

臺灣博碩士論文加值系統

(18.97.14.86) 您好!臺灣時間:2025/02/09 00:42
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:吳智揚
研究生(外文):WU, CHIH-YANG
論文名稱:魚鈎綁線自動化工具機系統開發
論文名稱(外文):Development of automatic tool machine system for fish hook binding
指導教授:林熊徵林熊徵引用關係
指導教授(外文):LIN, HSIUNG-CHENG
口試委員:陳宏明林熊徵黃國興
口試委員(外文):CHEN, HONG-MINGLIN, HSIUNG-CHENGHUANG, GUO-SHING
口試日期:2019-07-12
學位類別:碩士
校院名稱:國立勤益科技大學
系所名稱:電子工程系
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2019
畢業學年度:107
語文別:中文
論文頁數:65
中文關鍵詞:可程式控制器人機介面自動化生產魚鈎綁線氣動系統
外文關鍵詞:Programmable Logic ControllerHuman–machine interfaceSoildWorksPneumatic cylinderServo motor
相關次數:
  • 被引用被引用:0
  • 點閱點閱:166
  • 評分評分:
  • 下載下載:2
  • 收藏至我的研究室書目清單書目收藏:0
至今,全球魚鈎製造業的廠商,在產線上,依然採用人工方式將魚鈎及魚線綑綁結合,但近年各地勞動工資逐漸增加,廠商之製造成本也隨著增加。本研究基於此動機,旨在研發一套自動化系統,能夠進行綁線、生產魚鈎,取代人工。首先分析魚鈎生產過程,有進料、繞線、拉線、剪線、收集五個主要動作,其次以SoildWorks軟體畫出系統架構,模擬系統運行的動作,而且根據模擬結果進行修改,再者加入控制系統。以PLC做為主控制器,控制氣壓缸及伺服馬達去驅動機構,來達成模仿人工綁線的各種動作,其中搭配觸控螢幕的人機介面,使操作員可以操作系統。本系統實際運行已能穩定進行,未來應可實際應用於生產線上,取代傳統人工綁線。
Until now, the fishhook manufacturers around the world still rely on human operation for the hook wiring process in the production line. However, the rapid increasing labor cost has become a big challenge in industry. For this reason, this paper aims to design a fishhook wiring mechanical system using an automatic control process. Firstly, the fishhook production process is analyzed, including five main processes such as hook feeding, winding, pulling, trimming and collecting. Secondly, the system mechanical system is designed and similated using by SoildWorks software. The system is then integrated with the control system realized by the PLC as the main controller to achieve various actions. The HMI with the touch screen is designed to allow the technicians for friendly operating the system. The practical implementation has been carried out steadily. The results verify that the proposed system is feasible in terms of robustness, relialiabity and rapidness.
摘要 I
Abstract II
誌謝 III
圖目錄 VIII
表目錄 XII
第一章 緒論 1
1.1 前言 1
1.2 研究目的 1
1.3 論文架構 2
第二章 機構系統架構 3
2.1 主要功能介紹 4
2.2 機構系統設計 5
2.3 送線系統 7
2.3.1 魚鈎運送系統 10
2.3.2 繞線系統 13
2.3.3 拉線系統 16
2.3.4 氣動剪系統 18
2.3.5 出料系統 19
2.3.6 可拆式震動架系統 19
第三章 控制系統架構 22
3.1 可程式控制器 23
3.2 PLC軟體架構 23
3.2.1 主程式 25
3.2.2 自動模式 26
3.2.3 馬達模式 32
3.2.4 氣壓缸模式 33
3.2.5 校正模式 34
3.2.6 電動缸模式 34
3.2.7 復歸模式 35
3.3 人機介面程式架構 36
3.3.1 人機介面-首頁 37
3.3.2 人機介面-馬達控制 38
3.3.3 人機介面-氣壓缸控制 39
3.3.4 人機介面-開發者介面 40
第四章 驅動系統 42
4.1 氣壓驅動 42
4.2 伺服馬達 44
4.3 直流馬達 44
4.4 電動缸 45
4.5 配電盤 46
4.6 電源供應器 47
第五章 實驗結果 49
5.1 機構實體介紹 49
5.2 魚鈎進料系統實體介紹 50
5.3 送線系統實體介紹 50
5.4 魚鈎運送系統實體介紹 52
5.5 繞線系統實體介紹 54
5.6 拉線系統實體介紹 56
5.7 可拆式震動架實體介紹 56
5.8 電動缸數據分析 58
第六章 結論 62
第七章 參考文獻 64
論文發表 65
[1]Feng Jinbing, “Design of the Control System for Automatic Riveting Machine Based on PLC”, 2017 International Conference on Robots & Intelligent System (ICRIS), Page(s):119, Huai'an, China, 2017.
[2]Xinrui Zhang, Hui Ju, Dequan Guo, Richen Liu, “Design of an auto-removing mechanism based on a PLC control system”, (CISP), 2015 8th International Congress on Image and Signal Processing, Page(s):1923, Shenyang, China, 2015.
[3]Si-Chao Tang, Jia-ming Yao, Shou-xin Zhu, Meng-sheng Wang, Jia-Na Fang, Xue-Heng Tao, “Design of the control system for fully automatic steel-tube molding machine”, 2014 Fifth International Conference on Intelligent Systems Design and Engineering Applications (ISDEA), Hunan, China, 2014.
[4]吳邦彥、趙榮輝、白育霖、邱秀茹、武大郎,SolidWorks專業工程師訓練手冊,博碩文化股份有限公司,2016。
[5]郭興家,自動化概論,高立圖書有限公司,2010。
[6]洪志育,可程式控制器實務第2版,新文京開發出版股份有限公司,2014。

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊