臺灣博碩士論文加值系統

謝誌 I
摘要 II
Abstract III
目錄 IV
圖目錄 VI
表目錄 VIII
符號對照表 IX
第一章 緒論 1
1.1 .前言 1
1.2 .文獻回顧 2
1.3 .本文架構 3
第二章 理論基礎 4
2.1 .基本假設 4
2.2 .熱傳遞的方式 4
2.3 .流體運動控制方程式 6
2.4 .紊流數值模式 9
2.5 .邊界條件 10
第三章 LED燈實驗設計與驗證 11
3.1 .實驗架設 11
3.2 .實驗設備 12
3.3 .實驗步驟 12
3.4 .實驗結果與討論 15
3.5 .數值模式驗證 16
3.6 .LED燈箱自然對流數值模擬 19
第四章 LED集魚燈強制對流設計 28
4.1 .LED燈箱強制對流數值模擬 28
4.2 .LED燈箱外殼與風扇設計 32
4.3 .燈箱內部設計 38
4.4 .總結 39
第五章 田口法應用於LED集魚燈箱設計 54
5.1 .田口法 54
5.2 . LED集魚燈箱5因子5水準田口法設計 56
5.3 . LED集魚燈箱4因子5水準田口法設計 57
5.4 . LED集魚燈箱4因子3水準田口法設計 58
第六章 結論與未來展望 109
參考文獻 110

[1] G. D. V. Davis, “Natural Convection of Air in a Square Cavity a Benchmark Numerical Solution”, International Journal for Numerical Methods in Fluids, Vol.3, pp. 249-264, 1983.
[2] D. R. Chenoweth, and S. Paolucci, “Natural Convection in an Enclosed Vertical Air Layer with Large Horizontal Temperature Differences”, Journal of Fluid Mechanics, vol. 169, pp.173-210, 1986.
[3] Y. Horibata, “Numerical Simulation of a Low-Mach-Number Flow with a Large Temperature Variation”, Computers of Fluids, vol.21, pp. 185-200, 1992.
[4] D.D.Gray, and A.Giorigini, “ The validity of Boussinesq approximation for liquids and gases”, International Journal of Heat and Mass Transfer vol.19, pp.545-551, 1976.
[5] T. Fusegi, J. M. Hyun, and K. Kuwahara, “Three Dimensional Simulation of Natural Convection in a Sidewall-Heated Cube”, International Journal for Numerical Methods in Fluids, Vol.13, pp.857-867, 1991.
[6] E. Tric, G. Labrosse, and M. Betrouni, “A First Incursion into the 3D Structure of Natural Convection of Air in a Differentially Heated Cubic Cavity from Accurate Numerical Solutions”, International Journal of Heat and Mass Transfer, Vol.43, pp. 4043-4056, 2000.
[7] R. A. W. M. Henkes, and C. J. Hoogendoorn, “Scaling of the Laminar Natural Convection Flow in a Heated Square Cavity”, International Journal of Heat and Mass Transfer, Vol.36, No. 11, pp. 2913-2925, 1993.
[8] W . P. Jones and B. E. Launder. “The prediction of laminarization with a two-equation model of turbulence”, International Journal of Heat and Mass Transfer, Vol.15, pp.301-314, 1972b.
[9] Shih, T.H., Liou, W.W., Shabbir, A., Yang, Z., and Zhu, J. “A new k-epsilon Eddy-Viscosity Model for High Reynolds Number Turbulent Flows: Model development and validation”, Computers and Fluids 24, no. 3, pp. 227-238, 1994.
[10] H. T. Chen, Y. S. Lin, P. C. Chen, and J. R. Chang. “Numerical and experimental study of natural convection heat transfer characteristics for vertical plate fin and tube heat exchangers with various tube diameters”, International Journal of Heat and Mass Transfer, Vol.100, pp.320-331, 2016
[11] H. T. Chen, Y. J. Chiu, C. S. Liu, and J. R. Chang, “Numerical and experimental study of natural convection heat transfer characteristics for vertical annular finned tube heat exchanger”, International Journal of Heat and Mass Transfer, Vol.109, pp.378-392, 2017
[12] H. T. Chen, H. C. Tseng, S. W. Jhu, and J. R. Chang “Numerical and experimental study of mixed convection heat transfer and fluid flow characteristics of plate-fin heat sinks”, International Journal of Heat and Mass Transfer, Vol.111, pp.1050-1062, 2017
[13] H. T. Chen, Y. L. Chang, P. Y. Lin, Y. J. Chiu, and J. R. Chang, “Numerical study of mixed convection heat transfer for vertical annular finned tube heat exchanger with experimental data and different tube diameters”, International Journal of Heat and Mass Transfer, Vol.118, pp.931-947, 2018
[14] 李輝煌，田口方法—品質設計的原理與實務，高立圖書有限公司，2000。
[15] 廖慶聰，周德名，龔傑，流體力學精編本，歐亞書局有限公司，2016。
[16] 陳皇鈞，流體力學，曉園出版社，1985。
[17] 林子祥，“預測板鰭式熱沉於各種矩形外殼內之熱傳特性”，國立臺灣成功大學機械工程學系，2015。