跳到主要內容

臺灣博碩士論文加值系統

(44.211.26.178) 您好!臺灣時間:2024/06/15 02:58
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:鄭文琪
研究生(外文):JHENG, WUN-CI
論文名稱:光化學鉑沉積氮摻氧化石墨烯於非酶葡萄糖感測應用
論文名稱(外文):Photochemical Deposition of Platinum on Nitrogen-Doped Graphene Oxides for Non-Enzymatic Sensing of Glucose
指導教授:王建聰
指導教授(外文):WANG, CHIEN-TSUNG
口試委員:周禮君江昌嶽
口試委員(外文):CHAU, LAI-KWANCHIANG, CHANG-YUE
口試日期:2020-07-16
學位類別:碩士
校院名稱:國立雲林科技大學
系所名稱:化學工程與材料工程系
學門:工程學門
學類:化學工程學類
論文種類:學術論文
論文出版年:2020
畢業學年度:108
語文別:中文
論文頁數:58
中文關鍵詞:氧化石墨烯氮摻雜鉑奈米粒光化學還原法非酶感測器葡萄糖氧化電催化活性
外文關鍵詞:Graphene oxideNitrogen-dopedPlatinum nanoparticlesPhotochemical reductionnon-enzymatic sensorGlucose oxidationElectrocatalytic activity
相關次數:
  • 被引用被引用:0
  • 點閱點閱:153
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
摘要 i
Abstract ii
目錄 iii
表目錄 v
圖目錄 vi
第一章 緒論 1
1-1研究動機與目標 1
1-2研究內容 2
第二章 文獻回顧 3
2-1葡萄糖感測的應用與現況 3
2-1-1氧化酶葡萄糖感測器 4
2-1-2非酶葡萄糖感測器 5
2-2非酶葡萄糖感測功能材料 7
2-2-1貴金屬應用實例 7
2-2-2過渡金屬應用實例 11
2-3氧化石墨烯改質的方法 14
2-3-1氮摻雜石墨烯合成與特性 14
2-3-2金屬擔載氧化石墨烯的合成與特性 17
2-4光化學還原法 20
第三章 研究方法 24
3-1材料合成 24
3-1-1 Hummers法製備氧化石墨烯 24
3-1-2濕式化學法製備氮摻氧化石墨烯 24
3-1-3光化學還原法合成鉑奈米粒於氮摻氧化石墨烯 25
3-2電化學感測器製備 26
3-3實驗藥品 27
3-4儀器分析 28
第四章 結果與討論 29
4-1 鉑奈米粒/氮摻氧化石墨烯的儀器分析 29
4-1-1電子顯微鏡分析 29
4-1-2 X-光繞射儀分析 30
4-1-3高解析電子能譜儀分析 31
4-1-4拉曼分析 32
4-1-5螢光光譜分析 33
4-1-6紫外光-可見光光譜分析 34
4-2鉑奈米粒/氮摻氧化石墨烯於電化學葡萄糖感測 35
4-2-1氫吸脫附反應分析 37
4-2-2感測濃度效應 38
4-2-3干擾物分析 38
4-2-4重現性分析 39
4-2-5再製性分析 40
4-2-6穩定性分析 40
第五章 結論 41
參考文獻 42

[1]K. G. M. M. Alberti and P. Z. J. D. m. Zimmet, "Definition, diagnosis and classification of diabetes mellitus and its complications. Part 1: diagnosis and classification of diabetes mellitus. Provisional report of a WHO consultation," Diabetic medicine, vol. 15, no. 7, pp. 539-553, 1998.
[2]W. H. Organization, "Definition and diagnosis of diabetes mellitus and intermediate hyperglycaemia: report of a WHO/IDF consultation," 2006.
[3]G. Roglic, "WHO Global report on diabetes: A summary," International Journal of Noncommunicable Diseases, Review Article vol. 1, no. 1, pp. 3-8, 2016.
[4]O. World Health, "Global report on diabetes: executive summary," World Health Organization, Geneva2016.
[5]S. Mittelmaier, M. Fünfrocken, D. Fenn, T. Fichert, and M. J. J. o. C. B. Pischetsrieder, "Identification and quantification of the glucose degradation product glucosone in peritoneal dialysis fluids by HPLC/DAD/MSMS," Journal of Chromatography B, vol. 878, no. 11-12, pp. 877-882, 2010.
[6]J. M. Yuen, N. C. Shah, J. T. Walsh Jr, M. R. Glucksberg, and R. P. J. A. c. Van Duyne, "Transcutaneous glucose sensing by surface-enhanced spatially offset Raman spectroscopy in a rat model," Analytical Chemistry, vol. 82, no. 20, pp. 8382-8385, 2010.
[7]J. J. C. r. Wang, "Electrochemical glucose biosensors," Chemical Reviews, vol. 108, no. 2, pp. 814-825, 2008.
[8]L. C. Clark Jr and C. J. A. o. t. N. Y. A. o. s. Lyons, "Electrode systems for continuous monitoring in cardiovascular surgery," Annals of the New York Academy of Sciences, vol. 102, no. 1, pp. 29-45, 1962.
[9]S. Updike and G. J. N. Hicks, "The enzyme electrode," Nature, vol. 214, no. 5092, pp. 986-988, 1967.
[10]K. E. Toghill and R. G. J. I. J. E. S. Compton, "Electrochemical non-enzymatic glucose sensors: a perspective and an evaluation," Int. J. Electrochem. Sci., vol. 5, no. 9, pp. 1246-1301, 2010.
[11]J. Leland C. Clark, R. Wolf, D. Granger, and Z. Taylor, "Continuous Recording of Blood Oxygen Tensions by Polarography," vol. 6, no. 3, pp. 189-193, 1953.
[12]S. Park, H. Boo, and T. D. Chung, "Electrochemical non-enzymatic glucose sensors," Analytica Chimica Acta, vol. 556, no. 1, pp. 46-57, 2006.
[13]A. E. G. Cass et al., "Ferrocene-mediated enzyme electrode for amperometric determination of glucose," Analytical Chemistry, vol. 56, no. 4, pp. 667-671, 1984.
[14]P. D. Hale, T. Inagaki, H. I. Karan, Y. Okamoto, and T. A. Skotheim, "A new class of amperometric biosensor incorporating a polymeric electron-transfer mediator," Journal of the American Chemical Society, vol. 111, no. 9, pp. 3482-3484, 1989.
[15]A. L. Ghindilis, P. Atanasov, and E. Wilkins, "Enzyme-catalyzed direct electron transfer: Fundamentals and analytical applications," Electroanalysis, vol. 9, no. 9, pp. 661-674, 1997.
[16]J. Liu et al., "Carbon-decorated ZnO nanowire array: A novel platform for direct electrochemistry of enzymes and biosensing applications," Electrochemistry Communications, vol. 11, no. 1, pp. 202-205, 2009.
[17]Y. Xiao, F. Patolsky, E. Katz, J. F. Hainfeld, and I. Willner, ""Plugging into Enzymes": Nanowiring of Redox Enzymes by a Gold Nanoparticle," Science, vol. 299, no. 5614, pp. 1877-1881, 2003.
[18]E. Shoji and M. S. Freund, "Potentiometric Saccharide Detection Based on the pKa Changes of Poly(aniline boronic acid)," Journal of the American Chemical Society, vol. 124, no. 42, pp. 12486-12493, 2002.
[19]D. J. J. o. A. E. Pletcher, "Electrocatalysis: present and future," Journal of applied electrochemistry, journal article vol. 14, no. 4, pp. 403-415, 1984.
[20]K. Tian, M. Prestgard, and A. Tiwari, "A review of recent advances in nonenzymatic glucose sensors," Materials Science and Engineering: C, vol. 41, pp. 100-118, 2014.
[21]L. D. Burke, "Premonolayer oxidation and its role in electrocatalysis," Electrochimica Acta, vol. 39, no. 11, pp. 1841-1848, 1994.
[22]Q. Xu, L. Yin, C. Hou, X. Liu, and X. Hu, "Facile fabrication of nanoporous platinum by alloying–dealloying process and its application in glucose sensing," Sensors and Actuators B: Chemical, vol. 173, pp. 716-723, 2012.
[23]G. Chang et al., "Synthesis of highly dispersed Pt nanoclusters anchored graphene composites and their application for non-enzymatic glucose sensing," Electrochimica Acta, vol. 157, pp. 149-157, 2015.
[24]G.-h. Wu, X.-h. Song, Y.-F. Wu, X.-m. Chen, F. Luo, and X. Chen, "Non-enzymatic electrochemical glucose sensor based on platinum nanoflowers supported on graphene oxide," Talanta, vol. 105, pp. 379-385, 2013.
[25]D. Rathod, C. Dickinson, D. Egan, and E. Dempsey, "Platinum nanoparticle decoration of carbon materials with applications in non-enzymatic glucose sensing," Sensors and Actuators B: Chemical, vol. 143, no. 2, pp. 547-554, 2010.
[26]M. Gougis, A. Tabet-Aoul, D. Ma, and M. Mohamedi, "Laser synthesis and tailor-design of nanosized gold onto carbon nanotubes for non-enzymatic electrochemical glucose sensor," Sensors and Actuators B: Chemical, vol. 193, pp. 363-369, 2014.
[27]N. S. Ismail, Q. H. Le, H. Yoshikawa, M. Saito, and E. Tamiya, "Development of Non-enzymatic Electrochemical Glucose Sensor Based on Graphene Oxide Nanoribbon – Gold Nanoparticle Hybrid," Electrochimica Acta, vol. 146, pp. 98-105, 2014.
[28]T. Kangkamano, A. Numnuam, W. Limbut, P. Kanatharana, and P. Thavarungkul, "Chitosan cryogel with embedded gold nanoparticles decorated multiwalled carbon nanotubes modified electrode for highly sensitive flow based non-enzymatic glucose sensor," Sensors and Actuators B: Chemical, vol. 246, pp. 854-863, 2017.
[29]A. S. Ahammad, A. Al Mamun, T. Akter, M. Mamun, S. Faraezi, and F. J. J. o. S. S. E. Monira, "Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film," Journal of Solid State Electrochemistry, vol. 20, no. 7, pp. 1933-1939, 2016.
[30]H. Bai, M. Han, Y. Du, J. Bao, and Z. Dai, "Facile synthesis of porous tubular palladium nanostructures and their application in a nonenzymatic glucose sensor," Chemical Communications, vol. 46, no. 10, pp. 1739-1741, 2010.
[31]X.-m. Chen et al., "Nonenzymatic amperometric sensing of glucose by using palladium nanoparticles supported on functional carbon nanotubes," Biosensors and Bioelectronics, vol. 25, no. 7, pp. 1803-1808, 2010.
[32]L.-M. Lu, H.-B. Li, F. Qu, X.-B. Zhang, G.-L. Shen, and R.-Q. Yu, "In situ synthesis of palladium nanoparticle–graphene nanohybrids and their application in nonenzymatic glucose biosensors," Biosensors and Bioelectronics, vol. 26, no. 8, pp. 3500-3504, 2011.
[33]B. Haghighi, B. Karimi, M. Tavahodi, and H. Behzadneia, "Fabrication of a nonenzymatic glucose sensor using Pd-nanoparticles decorated ionic liquid derived fibrillated mesoporous carbon," Materials Science and Engineering: C, vol. 52, pp. 219-224, 2015.
[34]S. Darvishi, M. Souissi, F. Karimzadeh, M. Kharaziha, R. Sahara, and S. Ahadian, "Ni nanoparticle-decorated reduced graphene oxide for non-enzymatic glucose sensing: An experimental and modeling study," Electrochimica Acta, vol. 240, pp. 388-398, 2017.
[35]X. Niu, M. Lan, H. Zhao, and C. Chen, "Highly Sensitive and Selective Nonenzymatic Detection of Glucose Using Three-Dimensional Porous Nickel Nanostructures," Analytical Chemistry, vol. 85, no. 7, pp. 3561-3569, 2013.
[36]C. Guo, Y. Wang, Y. Zhao, and C. Xu, "Non-enzymatic glucose sensor based on three dimensional nickel oxide for enhanced sensitivity," Analytical Methods, vol. 5, no. 7, pp. 1644-1647, 2013.
[37]L. Hou, H. Zhao, S. Bi, Y. Xu, and Y. Lu, "Ultrasensitive and highly selective sandpaper-supported copper framework for non-enzymatic glucose sensor," Electrochimica Acta, vol. 248, pp. 281-291, 2017.
[38]D.-W. Hwang, S. Lee, M. Seo, and T. D. Chung, "Recent advances in electrochemical non-enzymatic glucose sensors – A review," Analytica Chimica Acta, vol. 1033, pp. 1-34, 2018.
[39]M. M. Rahman, A. J. S. Ahammad, J.-H. Jin, S. J. Ahn, and J.-J. Lee, "A Comprehensive Review of Glucose Biosensors Based on Nanostructured Metal-Oxides," Sensors, vol. 10, no. 5, 2010.
[40]F. Huang et al., "Nonenzymatic glucose sensor based on three different CuO nanomaterials," Analytical Methods, vol. 5, no. 12, pp. 3050-3055, 2013.
[41]M.-m. Guo, P.-s. Wang, C.-h. Zhou, Y. Xia, W. Huang, and Z. Li, "An ultrasensitive non-enzymatic amperometric glucose sensor based on a Cu-coated nanoporous gold film involving co-mediating," Sensors and Actuators B: Chemical, vol. 203, pp. 388-395, 2014.
[42]L. Shi, X. Zhu, T. Liu, H. Zhao, and M. Lan, "Encapsulating Cu nanoparticles into metal-organic frameworks for nonenzymatic glucose sensing," Sensors and Actuators B: Chemical, vol. 227, pp. 583-590, 2016.
[43]Y. Zhang et al., "CuO nanowires based sensitive and selective non-enzymatic glucose detection," Sensors and Actuators B: Chemical, vol. 191, pp. 86-93, 2014.
[44]Y. Zhao, X. Bo, and L. Guo, "Highly exposed copper oxide supported on three-dimensional porous reduced graphene oxide for non-enzymatic detection of glucose," Electrochimica Acta, vol. 176, pp. 1272-1279, 2015.
[45]L. T. Hoa, J. S. Chung, and S. H. Hur, "A highly sensitive enzyme-free glucose sensor based on Co3O4 nanoflowers and 3D graphene oxide hydrogel fabricated via hydrothermal synthesis," Sensors and Actuators B: Chemical, vol. 223, pp. 76-82, 2016.
[46]Y. Ding, Y. Wang, L. Su, M. Bellagamba, H. Zhang, and Y. Lei, "Electrospun Co3O4 nanofibers for sensitive and selective glucose detection," Biosensors and Bioelectronics, vol. 26, no. 2, pp. 542-548, 2010.
[47]H. L. Tan, A. Du, R. Amal, and Y. H. Ng, "Decorating platinum on nitrogen-doped graphene sheets: Control of the platinum particle size distribution for improved photocatalytic H2 generation," Chemical Engineering Science, vol. 194, pp. 85-93, 2019.
[48]Y.-F. Lu et al., "Nitrogen-Doped Graphene Sheets Grown by Chemical Vapor Deposition: Synthesis and Influence of Nitrogen Impurities on Carrier Transport," ACS Nano, vol. 7, no. 8, pp. 6522-6532, 2013.
[49]D. Wei, Y. Liu, Y. Wang, H. Zhang, L. Huang, and G. Yu, "Synthesis of N-Doped Graphene by Chemical Vapor Deposition and Its Electrical Properties," Nano Letters, vol. 9, no. 5, pp. 1752-1758, 2009.
[50]C. Zhang et al., "A nitrogen-doped ordered mesoporous carbon/graphene framework as bifunctional electrocatalyst for oxygen reduction and evolution reactions," Nano Energy, vol. 30, pp. 503-510, 2016.
[51]C. P. Ewels and M. Glerup, "Nitrogen Doping in Carbon Nanotubes," Journal of Nanoscience and Nanotechnology, vol. 5, no. 9, pp. 1345-1363, 2005.
[52]Z. Wang et al., "Synthesis of nitrogen-doped graphene by chemical vapour deposition using melamine as the sole solid source of carbon and nitrogen," Journal of Materials Chemistry C, 10.1039/C4TC00924J vol. 2, no. 35, pp. 7396-7401, 2014.
[53]T. Schiros et al., "Connecting Dopant Bond Type with Electronic Structure in N-Doped Graphene," Nano Letters, vol. 12, no. 8, pp. 4025-4031, 2012.
[54]D. Long, W. Li, L. Ling, J. Miyawaki, I. Mochida, and S.-H. Yoon, "Preparation of Nitrogen-Doped Graphene Sheets by a Combined Chemical and Hydrothermal Reduction of Graphene Oxide," Langmuir, vol. 26, no. 20, pp. 16096-16102, 2010.
[55]L. Sun et al., "Nitrogen-doped graphene with high nitrogen level via a one-step hydrothermal reaction of graphene oxide with urea for superior capacitive energy storage," Rsc Advances, vol. 2, no. 10, pp. 4498-4506, 2012.
[56]N.-W. Pu et al., "Hydrothermal Synthesis of N-Doped Graphene/Fe2O3 Nanocomposite for Supercapacitors," Int. J. Electrochem. Sci., vol. 13, pp. 6812-6823, 2018.
[57]Y. Chang, G. Han, J. Yuan, D. Fu, F. Liu, and S. Li, "Using hydroxylamine as a reducer to prepare N-doped graphene hydrogels used in high-performance energy storage," Journal of Power Sources, vol. 238, pp. 492-500, 2013.
[58]J. W. Lee, J. M. Ko, and J.-D. Kim, "Hydrothermal preparation of nitrogen-doped graphene sheets via hexamethylenetetramine for application as supercapacitor electrodes," Electrochimica Acta, vol. 85, pp. 459-466, 2012.
[59]S. A. Hasan, E. K. Tsekoura, V. Sternhagen, and M. Strømme, "Evolution of the Composition and Suspension Performance of Nitrogen-Doped Graphene," The Journal of Physical Chemistry C, vol. 116, no. 11, pp. 6530-6536, 2012.
[60]D. He, Y. Jiang, H. Lv, M. Pan, and S. Mu, "Nitrogen-doped reduced graphene oxide supports for noble metal catalysts with greatly enhanced activity and stability," Applied Catalysis B: Environmental, vol. 132-133, pp. 379-388, 2013.
[61]Y. Tian, F. Wang, Y. Liu, F. Pang, and X. Zhang, "Green synthesis of silver nanoparticles on nitrogen-doped graphene for hydrogen peroxide detection," Electrochimica Acta, vol. 146, pp. 646-653, 2014.
[62]M. Govindhan and A. Chen, "Simultaneous synthesis of gold nanoparticle/graphene nanocomposite for enhanced oxygen reduction reaction," Journal of Power Sources, vol. 274, pp. 928-936, 2015.
[63]S. Ghasemi, S. R. Hosseini, and S. Nabipour, "Preparation of nanohybrid electrocatalyst based on reduced graphene oxide sheets decorated with Pt nanoparticles for hydrogen evolution reaction," Journal of the Iranian Chemical Society, vol. 16, no. 1, pp. 101-109, 2019.
[64]X.-h. Meng et al., "One-step hydrothermal synthesis, characterization and visible-light catalytic property of Ag-reduced graphene oxide composite," Materials Research Bulletin, vol. 48, no. 4, pp. 1453-1457, 2013.
[65]I. Karaduman, E. Er, H. Çelikkan, N. Erk, and S. Acar, "Room-temperature ammonia gas sensor based on reduced graphene oxide nanocomposites decorated by Ag, Au and Pt nanoparticles," Journal of Alloys and Compounds, vol. 722, pp. 569-578, 2017.
[66]T. Shen, Z. Zhao, Q. Zhong, Y. Qin, P. Zhang, and Z.-X. J. R. a. Guo, "Preparation of graphene/Au aerogel film through the hydrothermal process and application for H2O2 detection," RSC Advances, vol. 9, no. 23, pp. 13042-13047, 2019.
[67]S. Liu, J. Tian, L. Wang, and X. Sun, "Microwave-assisted rapid synthesis of Ag nanoparticles/graphene nanosheet composites and their application for hydrogen peroxide detection," J Nanopart Res, vol. 13, pp. 4539–4548, 2011.
[68]W. Yuan, Y. Gu, and L. Li, "Green synthesis of graphene/Ag nanocomposites," Applied Surface Science, vol. 261, pp. 753-758, 2012.
[69]C. Lee, X. Wei, J. W. Kysar, and J. Hone, "Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene," Science, vol. 321, no. 5887, p. 385, 2008.
[70]M. D. Stoller, S. Park, Y. Zhu, J. An, and R. S. Ruoff, "Graphene-Based Ultracapacitors," Nano Letters, vol. 8, no. 10, pp. 3498-3502, 2008.
[71]S. Basu and P. Bhattacharyya, "Recent developments on graphene and graphene oxide based solid state gas sensors," Sensors and Actuators B: Chemical, vol. 173, pp. 1-21, 2012.
[72]R. R. Nair et al., "Fine Structure Constant Defines Visual Transparency of Graphene," Science, vol. 320, no. 5881, p. 1308, 2008.
[73]A. A. Balandin et al., "Superior Thermal Conductivity of Single-Layer Graphene," Nano Letters, vol. 8, no. 3, pp. 902-907, 2008.
[74]T.-F. Yeh, J.-M. Syu, C. Cheng, T.-H. Chang, and H. Teng, "Graphite Oxide as a Photocatalyst for Hydrogen Production from Water," Advanced Functional Materials, vol. 20, no. 14, pp. 2255-2262, 2010.
[75]A. Mathkar et al., "Controlled, Stepwise Reduction and Band Gap Manipulation of Graphene Oxide," The Journal of Physical Chemistry Letters, vol. 3, no. 8, pp. 986-991, 2012.
[76]S. Moussa, G. Atkinson, M. SamyEl-Shall, A. Shehata, K. M. AbouZeid, and M. B. Mohamed, "Laser assisted photocatalytic reduction of metal ions by graphene oxide," Journal of Materials Chemistry, vol. 21, no. 26, pp. 9608-9619, 2011.
[77]B. Li et al., "Waveband-dependent photochemical processing of graphene oxide in fabricating reduced graphene oxide film and graphene oxide–Ag nanoparticles film," RSC Advances, vol. 4, no. 5, pp. 2404-2408, 2014.
[78]H. F. Teoh et al., "Microlandscaping on a graphene oxide film via localized decoration of Ag nanoparticles," Nanoscale, vol. 6, no. 6, pp. 3143-3149, 2014.
[79]Y. Jiang, S. Chowdhury, and R. Balasubramanian, "Nitrogen-doped graphene hydrogels as potential adsorbents and photocatalysts for environmental remediation," Chemical Engineering Journal, vol. 327, pp. 751-763, 2017.
[80]T. Li, J. Liu, Y. Song, and F. Wang, "Photochemical Solid-Phase Synthesis of Platinum Single Atoms on Nitrogen-Doped Carbon with High Loading as Bifunctional Catalysts for Hydrogen Evolution and Oxygen Reduction Reactions," ACS Catalysis, vol. 8, no. 9, pp. 8450-8458, 2018.
[81]K. Wenderich, K. Han, and G. Mul, "The Effect of Methanol on the Photodeposition of Pt Nanoparticles on Tungsten Oxide," Particle & Particle Systems Characterization, vol. 35, no. 1, p. 1700250, 2018.
[82]M. Sakamoto, M. Fujistuka, and T. Majima, "Light as a construction tool of metal nanoparticles: Synthesis and mechanism," Journal of Photochemistry and Photobiology C: Photochemistry Reviews, vol. 10, no. 1, pp. 33-56, 2009.
[83]Y.-X. Huang, J.-F. Xie, X. Zhang, L. Xiong, and H.-Q. Yu, "Reduced Graphene Oxide Supported Palladium Nanoparticles via Photoassisted Citrate Reduction for Enhanced Electrocatalytic Activities," ACS Applied Materials & Interfaces, vol. 6, no. 18, pp. 15795-15801, 2014.
[84]H.-H. Park, X. Zhang, Y.-J. Choi, H.-H. Park, and R. H. Hill, "Synthesis of Ag Nanostructures by Photochemical Reduction Using Citrate-Capped Pt Seeds," Journal of Nanomaterials, vol. 2011, pp. 265-287, 2011.
[85]W. Leng, P. Pati, and P. J. J. E. S. N. Vikesland, "Room temperature seed mediated growth of gold nanoparticles: mechanistic investigations and life cycle assesment," Environ. Sci.: Nano, vol. 2, no. 5, pp. 440-453, 2015.
[86]J. Li, C.-y. Liu, and C. Cheng, "Electrochemical detection of hydroquinone by graphene and Pt-graphene hybrid material synthesized through a microwave-assisted chemical reduction process," Electrochimica Acta, vol. 56, no. 6, pp. 2712-2716, 2011.
[87]J. Shen et al., "Facile synthesis and application of Ag-chemically converted graphene nanocomposite," Nano Res, vol. 3, no. 5, pp. 339-349, 2010.
[88]G. Arteaga, L. M. Rivera-Gavidia, S. J. Martínez, R. Rizo, E. Pastor, and G. García, "Methanol Oxidation on Graphenic-Supported Platinum Catalysts," Surfaces, vol. 2, 2019.
[89]X. Li, T. Tang, M. Li, and X. J. J. o. M. S. M. i. E. He, "Photochemical doping of graphene oxide thin films with nitrogen for electrical conductivity improvement," Journal of Materials Science: Materials in Electronics, vol. 26, no. 3, pp. 1770-1775, 2015.
[90]L. Zhou, H. Gu, C. Wang, J. Zhang, M. Lv, and R. He, "Study on the synthesis and surface enhanced Raman spectroscopy of graphene-based nanocomposites decorated with noble metal nanoparticles," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 430, pp. 103-109, 2013.
[91]I. Ocsoy et al., "DNA-Guided Metal-Nanoparticle Formation on Graphene Oxide Surface," Advanced Materials, vol. 25, no. 16, pp. 2319-2325, 2013.
[92]S. Yang, W. Yue, D. Huang, C. Chen, H. Lin, and X. J. R. A. Yang, "A facile green strategy for rapid reduction of graphene oxide by metallic zinc," Rsc Advances, vol. 2, no. 23, pp. 8827-8832, 2012.
[93]Y. Qin et al., "Ultrafine Pt nanoparticle-decorated robust 3D N-doped porous graphene as an enhanced electrocatalyst for methanol oxidation," Chemical Communications, vol. 52, no. 2, pp. 382-385, 2016.
[94]T. Lagarteira, S. Delgado, C. Fernandes, C. Azenha, C. Mateos-Pedrero, and A. Mendes, "The role of Pt loading on reduced graphene oxide support in the polyol synthesis of catalysts for oxygen reduction reaction," International Journal of Hydrogen Energy, 2020.
[95]Y. Sun, Y. Dai, Y. Liu, and S. Chen, "A rotating disk electrode study of the particle size effects of Pt for the hydrogen oxidation reaction," Physical Chemistry Chemical Physics, vol. 14, no. 7, pp. 2278-2285, 2012.
[96]N. S. Anuar, W. J. Basirun, M. Ladan, M. Shalauddin, and M. S. Mehmood, "Fabrication of platinum nitrogen-doped graphene nanocomposite modified electrode for the electrochemical detection of acetaminophen," Sensors and Actuators B: Chemical, vol. 266, pp. 375-383, 2018.

電子全文 電子全文(網際網路公開日期:20250818)
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊