|
It is a high-rise building that integrates residential buildings and corporate office buildings, and has become and leads the urban spatial form and volume. In high-rise buildings, in order to shorten the construction time, the interior decoration light partition system replaces the traditional brick wall. In addition to reducing the weight of the building itself and reducing the impact of earthquake forces, it also provides more flexible use of indoor space. This study will provide a discussion on the best method of joining the light compartment and the external wall curtain system, the construction method of the dry-type light compartment wall hanging and suspended stone countertops in the bathroom and toilet area of the interior decoration project, and the sound insulation method.
After discussion and analysis, there are light compartments and exterior wall curtains at different space junctions. At the same time, the finishing method of the subsequent decoration should be considered, and the joint interface aluminum extrusion should be added according to the thickness requirements of different decoration materials. Use actual cases to discuss Later, 3 forms were proposed. The thickness of the matching design and decoration materials is about 1.5~5.0cm, and the required width of the aluminum extrusion type should be 15~20cm. According to this plan, the construction method is discussed to achieve the joint construction method of joint integrity and aesthetics, and at the same time, it can also make the owner, design and construction unit recognize the advantages of its joint.
In the interior decoration project, the bathroom and toilet are implemented by hanging the dry-type light partition wall with the suspended stone countertop. The discussion meets the requirement that the countertop can carry a load of 300kg and the displacement is less than 3.00mm. The empirical result is based on the original dry-type light partition. In terms of structure, it is implemented by reducing the spacing between column aggregates and adding reinforcing materials such as lining metal plates and double-layer metal tubular components (TYPE-B). And the convenient construction method that shortens the construction period, also reduces the volume occupied by the frame members in terms of space use, and improves the use and aesthetics of the overall bathroom space.
Based on the vertical service core elevator shaft designed in the building building, the interface joint, the construction type of the elevator hall wall, and the elevator traveling noise are discussed and the construction method and application are discussed. A hollow layer is added to reduce the resonance transmission sound of the elevator shaft components. The measured value is 39.9dB (less than the original design indoor standard of 55dB), and the reduction of 15.1dB can achieve good sound insulation performance. This is the best construction method proposed in this study.
|