
AASHTO. (2014). LRFD bridge design specifications, 7th ed. Association of State Highway and Transportation Officials, Washington, DC. AASHTO. (2020). LRFD bridge design specifications, 9th ed. Association of State Highway and Transportation Officials, Washington, DC. AbuFarsakh, M. and Titi, H. (2004). “Pile capacity by direct CPT and CPTu methods applied to 102 case histories.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 130, No. 9, pp. 935944. Baker, C. N., Drumright, E. E., Joseph, L. M., and Azam, T. (1996). “The taller the deeper.” Civil Engineering (the Geoenvironmental special issue), ASCE, 66 (11), 3A6A. Baker, C. N., Jr., Azam, T., and Joseph, L. S. (1994). “Settlement analysis for 450meter tall KLCC Towers.” Vertical and horizontal deformations of foundations and embankments: Proceedings Settlement 94, Geotechnical Special Publication No. 40, ASCE, New York, Vol. 2, 1650– 1671. Baker, R. M., Duncan, J. M., Rojiani, K. B., Ooi, P. S. K., Tan, C. K., and Kim, S. G. (1991). Manual for the design of bridge foundations. NCHRP Report 343, Washington, DC: Transportation Research Board of National Research Council. Caquot, A., and Kérisel, J. (1953). “Sur le terme de surface dans le calcul des foundations en milieu pulverulent.” Proceedings 3rd International Conference on Soil Mechanics and Foundation Engineering, Zurich, Switzerland, I, 336– 337. Carter, J.P., and Kulhawy, F.H. (1988). “Analysis and design of drilled shaft foundations socketed into rock.” Report EPRI5918, EPRI, Palo Alto. Chavda, J and Dodagoudar, GR (2017). “Evaluation of ultimate capacity of a single barrette using finite element analysis”, Indian Geotechnical Conference. Chen Y. J, and Li C. C. (1994). “Discussion on Undrained Clay Shear Strength and Design Suggestions,” Zhongxing Engineering, vol.0, p.4452. Chen, J.R. (2004). “Axial behavior of drilled shafts in gravelly soils.” Ph.D. Dissertation, Department of Civil & Environmental Engineering, Cornell University, New York. Chen, Y. J. and Kulhawy, F. H. (1994). “Case history evaluation of the behavior of drilled shafts under axial and lateral loading.” Final Report TR104601, EPRI, Palo Alto. Chen, Y. J., Fang, Y. C., and Chu, T. H. (2009b). “Evaluation of compression tip capacity for drilled shafts.” GSP 185, ASCE, pp. 6370. Chen, Y.J, Chang, H.W., and Kulhawy, F.H. (2008). “Evaluation of uplift interpretation criteria for drilled shaft capacity.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.134, 14591468. Chen, Y.J., and Chu, T.H. (2012). “Evaluation of uplift interpretation criteria for drilled shafts in gravelly soils.” Canadian Geotechnical Journal, 49, 7077. Chen, Y.J., and Fang, Y.C. (2009a). “Critical evaluation of compression interpretation criteria for drilled shafts.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(8), 10561069. Chen, Y.J., and Kulhawy, F.H. (2002). “Evaluation of drained axial capacity for drilled shafts.” GSP 116, ASCE, 12001214. Chen, Y.J., and Lee, Y.S. (2010). “Evaluation of lateral interpretation criteria for drilled shaft capacity.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.136, 11241136. Chen, Y.J., Chen, C.H., and Chang, J. (2013). “Evaluation of interpretation criteria for prebored PC piles in drained soils.” Journal of the Chinese Institute of Civil and Hydraulic Engineering, 25 (1), 17. Chen, Y.J., Chu, T.C., Topacio, A., and Marcos, M.C. (2021b). “Interrelationships of Load and Displacement of Barrette Piles for Various Interpretation Criteria under Drained Loading.” The 3rd International Conference on Civil, Materials, and Environmental Engineering, 2021 /4 /4 ~ 2021 /4 /5, Malaysia. Chen, Y.J., Chu, T.H., and Huang, J.K. (2016). “Compression capacity and displacement for drilled shafts in gravelly soils.” In: 5th International MultiConference on Engineering and Technology Innovation (IMETI), Taiwan. Chen, Y.J., Laveti, S., and Topacio, A. (2022a). “Databasebased analysis of drained interpretation criteria for barrette piles.” International Symposium on Geotechnical Safety and Risk (ISGSR 2022), 2022 /12 /14 ~ 2022 /12 /16, Australia. Chen, Y.J., Lin, S.W., and Kulhawy, F.H. (2011). “Evaluation of lateral interpretation criteria for rigid drilled shafts.” Canadian Geotechnical Journal, Vol. 48, 634643. Chen, Y.J., Lin, W.Y., Topacio, A., and Phoon, K.K. (2021a). “Evaluation of interpretation criteria for drilled shafts with tip postgrouting.” Soils and Foundations 61 (5), 13541369. Chen, Y.J., Marcos, M.C., Chu, T.H., and Wu, H.W. (2012). “Evaluation of tip capacity analysis model for drilled shafts in gravelly soils.” Journal of Vibroengineering, 14, 15411550. Chen, Y.J., Phoon, K.K., Topacio, A., and Laveti, S.K. (2023). “Uncertainty analysis for drilled shaft axial behavior using CYCU/DrilledShaft/143.” Soils and Foundations, 63 (4), https://doi.org/10.1016/j.sandf.2023.101337 Chen, Y.J., Topacio, A., and Laveti, S. (2022b). “Interrelationships of Load and Displacement of Barrette Piles for Various Interpretation Criteria Subjected to Uplift Loading.” 6th International Conference on Civil Engineering (ICOCE 2022), 2022 /3 /27 ~ 2022 /3 /29, Republic of Singapore. Chen, YJ., Hsiao, CC., Topacio, A. (2019). “Side resistance of drilled shafts socketed into rocks for serviceability and ultimate limit states.” International Conference on Advanced Technology Innovation 2019, 2019 /7 /15 ~ 2019 /7 / 18, Japan. Chin, F. K. (1970). “Estimation of the ultimate load of piles not carried to failure.” 2nd Southeast Asian Conference on Soil Engineering, Singapore, pp. 8190. Ching, J. and Phoon, K. K. (2015). “Constructing multivariate distribution for soil parameters.” Chapter 1, Risk and Reliability in Geotechnical Engineering, 376. CRC Press/Balkema. Christian, J.T. (2004). “Geotechnical engineering reliability: how well do we know what we are doing?” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Reston, Vol. 130, No. 10, 9851003. Chu, T.H. (2009). “Evaluation of interpretation criteria and capacity for drilled shafts in gravelly soils under axial and lateral loading.” Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan. Cushing, A.G., and Kulhawy, F.H. (2001). “Undrained elastic behavior of drilled shaft foundations in cohesive soils.” In: 15th International Conference of Soil Mechanics, and Geotechnical Engineering, 2, Balkema, Rotterdam, pp. 873–876. Cushing, A.G., and Kulhawy, F.H. (2002). “Drained elastic behavior of drilled shafts in cohesionless soils.” In: Deep foundations, GSP 116, ASCE, Reston, Va., 1, pp. 22–36. Das, B. M. (2010). Principles of Foundation Engineering, 7th Edition. Cengage Learning. Davisson, M. T. (1972). “High capacity piles.” Proc., Lecture Series on Innovation in Foundation Construction, ASCE, Illinois Section, Chicago, pp. 52. DeBeer, E. E. (1970). “Experimental determination of shape factors of sand.” Geotechnique, Vol. 20, No. 4, pp. 387411. Det Norske Veritas (DNV). (2017). Recommended Practice: Statistical Representation of Soil Data, DNCGLRPC207, Oslo, Norway. DIN 4026. (1975). Beiblatt, Rammpfahle, Herstellun Bemessung und Zulassige Belastun Eraulterungen. url: https://www.umweltonline.de/recht/bau/din/402664B._C<. Duncan, J. M. and Chang, C. Y. (1970). “Nonlinear analysis of stress and strain in soils.”Journal of the Soil Mechanics and Foundation Division, Vol. 96, No. SM5, pp. 16291653. Duzceer, R., and Saglamer, A. (2002). “Evaluation of pile load test results.” In: 9th International Conference on Piling and Deep Foundations, Deep Foundation Institute, Nice, France. Eslami, A. and Felleneus, B. H. (1997). “Pile capacity by direct CPT and CPTu methods applied to 102 case histories.” Canadian Geotechnical Journal, Vol. 34, No. 6, pp. 886904. Fang, Y. C. (2007). “Evaluation of tip resistance and compression interpretation criteria for drilled shafts.” Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan. Fellenius, B. H. (1975). “Test loading of piles—Methods, interpretation, and new proof testing procedure.” Journal of Geotechnical Engineering Division, 101(9), 855–869. Fellenius, B. H. (2006). “Basics of Foundation Design,” Electronic Ed., (www.Fellenius.net). Fenton, G.A., Naghibi, F., Dundas, D., Bathurst, R.J., and Griffiths, D.V. (2016). “Reliabilitybased geotechnical design in 2014 Canadian Highway Bridge Design Code.” Canadian Geotechnical Journal, Vol. 53, No. 2, 236251. Fuller, F. M. and Hoy, H. E. (1970). “Pile load tests including quick load test method, conventional methods, and interpretations.” Highway Research Record 333, Highway Research Board, Washington, pp. 7486. Gibbs, H. J. and Holtz, W. G. (1957). “Research on determining the density of sands by spoon penetration testing.” Proc., 4th International Conference on Soil Mechanics and Foundation Engineering, Vol. 1, London, pp. 3539. Hansen, J.B. (1970). “A revised and extended formula for bearing capacity.” Bulletin 28, Danish Geotechnical Institute, Copenhagen. Hirany, A., and Kulhawy, F.H. (1988). “Conduct and interpretation of load tests on drilled shaft foundations: Detailed guidelines.” Report EL5915(1), EPRI, Palo Alto. Hirany, A., and Kulhawy, F.H. (1989). “Interpretation of load tests on drilled shafts. I: axial compression.” Foundation Engineering: Current Principles and Practices, ASCE, New York, 11321149. Hirany, A., and Kulhawy, F.H. (2002). “On the interpretation of drilled foundation load test results.” Deep foundations, GSP 116. Edited by M.W. O’Neill and F.C. Townsend. American Society of Civil Engineers, Reston, Va., 1018–1028. Hough, B. K. (1969). Basic Soils Engineering, 2nd Edition. Ronald Press, New York, p. 634. Hsiao, C.C., Topacio, A., Chen, Y.J. 2020. Evaluation of side resistance for drilled shafts in rock sections, Geomechanics and Engineering, Vol. 21, No. 6, 503511. Ismael, N. F. and Klym, T. W. (1978). “Behavior of rigid piers in layered cohesive soils.” Journal of Geotechnical Engineering Division, ASCE, Vol. 104, No. 8, pp. 10611074. Ismail, A. N. (2020). “Lateral performance of single and group of laterally loaded barrettes in cohesionless soil, Master Thesis, Department of Civil Engineering, Cairo University Giza, Egypt. ISO. (2015). General principles on reliability of structures. ISO2394:2015, Geneva, Switzerland. Kulhawy, F. H. (1991). “Drilled shaft foundations.” Chap. 14 in Foundation Engineering Handbook (2nd Ed.), Van Nostrand Reinhold, New York, pp. 537552. Kulhawy, F. H., and Mayne, P. W. (1990). “Manual on estimating soil properties for foundation design.” Report EL6800, EPRI, Palo Alto. Kulhawy, F. H., Duncan, J. M., and Seed, H. B. (1969). “Finite element analysis of stresses and movements in embankments during construction.” Contract Report S698, U.S. Army Engineer Waterways Experiment Station, Vicksburg, pp. 169. Kulhawy, F. H., Jackson, C. S., and Mayne, P. W. (1989). “Firstorder estimation of Ko in sands and clay.” Foundation Engineering: Current Principles and Practices (GP 22), Ed. F.H. Kulhawy, ASCE, New York, pp. 121134. Kulhawy, F. H., Trautmann, C. H., Beech, J. F., O ‘Rourke, T. D., McGuire, W., Wood, W. A., and Capano, C. (1983). “Transmission line structure foundations for upliftcompression loading.” Report EL2870, EPRI, Palo Alto. Kulhawy, F.H. (2004). “On the axial behavior of drilled foundations.” In: GeoSupport 2004: Drilled Shafts, Micropiling, Deep Mixing, Remedial Methods, and Specialty Foundation Systems, GSP 124, ASCE, Reston, Va., pp. 34–51. Kulhawy, F.H. (2010). Uncertainty, reliability, and foundation engineering: the 5th Peter Lumb lecture, HKIE Transactions, 17 (3), 1924. doi:10.1080/1023697X.2010.10668200. Kulhawy, F.H., and Phoon, K.K. (2009). “GeoRBD for foundations – let’s do it right!” In: International Foundation Congress and Equipment Expo: Contemporary topics in insitu testing, analysis, and reliability of foundations, GSP 186, edited by M. Iskander, D. F. Laefer, and M. H. Hussein, 442449. Reston, VA: ASCE. doi:10.1061/41022(336)57. Lambe, T. W. (1985). “Amuay landslides.” Proc. 11th International Conference on Soil Mechanics and Foundation Engineering, Jubilee Volume, San Francisco, pp. 137159. Lambe, T. W. and Whitmann, R. V. (1969). Soil Mechanics. John Wiley and Sons, New York, p. 553. Lan, S.Y. (2004). “Database of axial pile load tests.” Master Thesis, National Taiwan University, Taipei, Taiwan. Lei, G.H., and Ng, C.W.W. (2007). “Rectangular barrettes and circular bored piles in saprolites.” Proceedings of the Institution of Civil EngineersGeotechnical Engineering 160 (4), 237242. Lesny, K. (2017). “Evaluation and consideration of model uncertainties in reliabilitybased design.” In: Joint ISSMGE TC 205/TC 304 Working Group on Discussion of Statistical/Reliability methods for Eurocodes, ISSMGE, London, UK. Liao, M.R. (2012). “Development of drilled shaft load test database and webbased system.” Master Thesis, Chung Yuan Christian University, Taoyuan, Taiwan. Lin, S.S., Marcos, M.C., Chang, H.W., and Chen, Y.J. (2012). “Design and implementation of a drilled shaft load test database.” Computers and Geotechnics, pp. 106113. Long, J.H., and Shimel, S. (1989). “Drilled shafts – A database approach.” In: Foundation Engineering Congress, pp. 10911108. Lumb, P. (1966). “The variability of natural soils.” Canadian Geotechnical Journal, Vol. 3, No. 2, 7497. Marcos, M.C. (2013). “Axial behavior of driven precast concrete piles.” PhD Dissertation. Department of Civil Engineering, Chung Yuan Christian University, Taiwan. Marcos, M.C., and Chen, Y.J. (2013). “Evaluation of lateral interpretation criteria for drilled shaft capacity in gravels.” Geotechnical and Geological Engineering, Vol. 31, 14111420. Marcos, M.C., and Chen, Y.J. (2018). "Applicability of various load test interpretation criteria in measuring driven precast concrete pile uplift capacity." International Journal of Engineering and Technology Innovation, Vol. 8, 118132. Marcos, M.C., Chen, Y.J., and Chang, K.C. (2014). “Evaluation of interpretation criteria for piles under compression loading.” Journal of Advanced Engineering, Vol. 9, 177182. Marcos, M.C., Chen, Y.J., and Kulhawy, F.H. (2013). “Evaluation of compression load test interpretation criteria for driven precast concrete pile capacity.” KSCE Journal of Civil Engineering, Vol. 17, 10081022. Marcos, M.C., Lin, S.S., Liao, M.R., Huang, J.K., and Chen, Y.J. (2012). “Development of a database for pile load tests.” In: GeoCongress 2012, GSP 225, ASCE, pp. 295304. Mayne, P. W. and Mitchelle, J. K. (1988). “Profiling of overconsolidation ratio in clays by field vane.” Canadian Geotechnical Journal, Vol. 25, No. 1, pp. 150157. Mayne, P. W., and Kulhawy, F. H. (1982). “Ko – OCR relationships in soils.” Journal of Geotechnical Engineering Division, ASCE, Vol. 108, No. GT6, pp. 851872. Meyerhof, G. G. (1956). “Penetration tests and bearing capacity of cohesionless soils.” Journal of the Soil Mechanics and Foundation Division, ASCE, Vol. 82, No. SM1, pp. 119. Meyerhof, G. G. (1965). “Shallow foundations.” Journal of the Soil Mechanics and Foundations Division, ASCE, 91 (SM2), pp. 2131. Meyerhof, G.G. (1963). “Some recent research on the bearing capacity of foundations.” Canadian Geotechnical Journal, 1 (1), 1626. Mitchell, J. K. (1976). “Fundamentals of Soil Behavior.” John Wiley and Sons, New York, p. 422. Ng, C.W.W., and Lei, G. H. (2003). “Performance of long rectangular barrettes in granitic saprolites.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129 (9), 685696. O’Rourke, T. D. and Kulhawy, F. H. (1985). “Observations on load tests on drilled shafts.” Drilled Piers and Caissons II, ASCE, New York, pp. 113128. Ohya, S., Imai, T., and Matsubara, M. (1981). “Relationship between N value by SPT and LLT pressuremeter results.” Proc. 2nd European Symposium on Penetration Testing, Vol. 1, Amsterdam, pp. 125130. Park, S.W., and Lim, D.S. (2009). “Evaluation of load transfer characteristics of barrette pile based on bidirectional loading tests.” Journal of the Korean Society of Civil Engineers, 29 (2C), 4149. Peck, R. B., Hanson, W. E., and Thornburn, T. H. (1974). Foundation Engineering, 2nd Edition. John Wiley and Sons, New York, pp. 514. Phoon, K. K. and Kulhawy, F. H. (2008). “Serviceability limit state reliabilitybased design.” Chapter 9, ReliabilityBased Design in Geotechnical Engineering: Computations and Applications, Taylor & Francis, UK, 344383. Phoon, K.K. and Kulhawy, F.H. (2005). “Characterization of model uncertainties for laterally loaded rigid drilled shafts”. Géotechnique, 55(1), 45–54. https://doi.org/10.1680/geot.2005.55.1.45. Phoon, K.K., and Kulhawy, F.H. (1999). “Characterization of geotechnical variability,” Canadian Geotechnical Journal, 36(4), 612624. Phoon, K.K., and Tang, C. (2019) a. “Effect of extrapolation on interpreted capacity and model statistics of steel Hpiles,” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazard, 13(4), 291302. Phoon, K.K., and Tang, C., (2019) b. “Characterization of geotechnical model uncertainty.” In: Proceedings, Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 13 (2), 101130. Phoon, K.K., and Tang, C., (2023). “Role of performance information in datacentric geotechnics.” Chapter 1, Database approach for datacentric geotechnics: geotechnical structures, CRC Press, Boca Raton (draft). Phoon, K.K., Prakoso, W.A., Wang, Y., and Ching, J.Y. (2016). “Uncertainty representation of geotechnical design parameters.” In: Reliability of Geotechnical Structures in ISO2394, London, UK, 4987. Poulos, H., Chow, H., and Small, J. (2019). “The use of equivalent circular piles to model the behaviour of rectangular barrette foundations.” Geotechnical Engineering Journal of the SEAGS & AGSSEA, 50 (3), 106109. Reissner, H. (1924). “Zum Erddruckproblem.” Proceedings, First International Congress of Applied Mechanics, Delft, 295311. Ronold, K.O., and Bjerager, P. (1992). “Model uncertainty representation in geotechnical reliability analysis.” Journal of Geotechnical Engineering, ASCE, Reston, Vol. 118, No. 3, 363376. Schneider, J. A., Xu, Xiangtao, and Lehane, B. M. (2008). “Database assessment of CPTbased design methods for axial capacity of driven piles in siliceous sands.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 9, pp. 12271244. Stas, C. V. and Kulhawy, F. H. (1984). “Critical evaluation of design methods for foundations under axial uplift and compression loading.” Report EL3771, EPRI, Palo, Alto. Tang, C., and Phoon, K.K. (2018). “Statistics of model factors in reliabilitybased design of axially loaded driven piles in sand.” Canadian Geotechnical Journal, Vol. 55, No. 11, 1592–1610. https://doi.org/10.1139/cgj20170542. Tang, C., and Phoon, K.K. (2019) a. “Evaluation of stressdependent methods for the punchthrough capacity of foundations in clay with sand.” ASCEASME Journal of Risk Uncertainty in Engineering Systems, Part A: Civil Engineering, 5 (3), 04019008. Tang, C., and Phoon, K.K. (2019) b. “Characterization of model uncertainty in predicting axial resistance of piles driven into clay.” Canadian Geotechnical Journal, 56 (8), 10981118. Tang, C., and Phoon, K.K. (2020). “Statistical evaluation of model factors in reliability calibration of highdisplacement helical piles under axial loading.” Canadian Geotechnical Journal, 57 (2), 246262. Tang, C., and Phoon, K.K. (2021). Model uncertainties in foundation design 1st ed. CRC Press, Taylor and Francis Group, Boca Raton. Tang, C., Phoon, K.K., and Chen, Y.J. (2019). “Statistical analyses of model factors in reliabilitybased limit state design of drilled shafts under axial loading.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 145 (9), 05019042119. Teparaksa, Q. (2002). “Behavior and Performance of instrumented barrette piles in Bangkok subsoils.” In International Deep Foundations Congress, ASCE, Reston. Teparaksa, W., Sinkinson, M., and Teparaksa, J. (2018). “Vertcal capacity of large and deep barrette pile for Bangkok subsoils.” In Proceedings of ChinaEurope Conference on Geotechnical Engineering, pp. 10271031. doi: https://doi.org/10.1007/9783319971155_31 Terzaghi, K. and Peck, R. B. (1967). Soil Mechanics in Engineering Practice, 2nd edition. John Wiley and Sons, New York. Tomlinson, M. J. (1957). “The adhesion of piles driven in clay soils.” Proc. 4th International Conference on Soil Mechanics and Foundation Engineering, London, Vol. 2, pp. 6671. Topacio, A. (2023). “Evaluation of tip resistance for drilled shafts socketed into rocks.” PhD Dissertation. Department of Civil Engineering, Chung Yuan Christian University, Taiwan. Topacio, A., Chen, Y.J., Phoon, K.K., and Tang, C. (2022). “Evaluation of compression interpretation criteria for drilled shafts socketed into rocks.” Proceedings of the Institution of Civil Engineers  Geotechnical Engineering, 117. doi: 10.1680/jgeen.21.00120. Trautmann, C. H. and Kulhawy, F. H. (1987). “CUFAD – A computer program for compression and uplift foundation analysis and design.” Report EL – 4540CCM (16), EPRI, Palo Alto. van der Veen, C. (1953). “The Bearing capacity of a pile.” Proc. 3rd International Conference on Soil Mechanics and Foundation Engineering, Vol. 2, Zurich, pp. 84 90. Vesic, A.S. (1973). “Analysis of ultimate loads of shallow foundation.” Journal of the Soil Mechanics and Foundation Division, American Society of Civil Engineers, 99 (SM1), 4573. Vesic, A.S. (1975). “Bearing capacity of shallow foundation.” Chapter 3: in Foundation Engineering Handbook, Van Nostrand Reinhold, N.Y. Wysockey, M.H., and Long, J.H. (1994). “Utility of drilled shaft load test results.” In: International Conference of Design and Construction of Deep Foundation, pp. 17891803. Zhang, L.M. (2003). “Behavior of laterally loaded largesection barrettes.” Journal of Geotechnical and Geoenvironmental Engineering, 129 (7), 639. Zhang, L.M., Shiek, L.M.P., Pang, H.W., and Pang, C.F. (2006). “Knowledgebased and construction of drivel piles.” Proceedings of the Institution of Civil Engineers – Geotechnical Engineering, 159, 177185. Zhu, H., and Chang, M.F., (2002). “Load transfer curves along bored piles considering modulus degradation.” Journal of Geotechnical and Geoenvironmental Engineering, 128(9), 764774. Zhang, L.M., and Chu, L.F. (2009). “Calibration of methods for designing largediameter bored piles: ultimate limit state.” Soils and Foundations, Vol. 49, No. 6, 883896. Zhang, L.M., Xu, Y., and Tang, W.H. (2008). “Calibration of models for pile settlement analysis using 64 field load tests.” Canadian Geotechnical Journal, Vol. 45 (1) ,5973.
