臺灣博碩士論文加值系統

本文利用共平面矩形槽孔設計天線，運用單頻天線加入環型線路共振其他頻帶，利用HFSS電磁場數值模擬軟體探討各類參數，以及單頻到三頻各架構的共振機制，了解機制與參數的影響，透過調整後，使2.4GHz單頻矩形槽孔天線改變成符合DCS／PCS、WLAN、WiMAX等規範天線，使天線運用更加廣泛。本篇也加入了EBG架構抑制不必要頻帶，並探討加入EBG後對天線機制的各種影響。

This thesis shows a triple-band antenna feeding by a coplanar waveguide (CPW). By adding two rings on a gap patch, two extra bands will be generated. By using electromagnetic simulator HFSS to discuss the related geometrical parameters, we can get the design rules related to those geometrics. Using those design rules, one can easily design a triple-band antenna for DCS/PCS, WLAN and WiMax. Besides, this thesis provides an idea to suppress unwanted bands by electromagnetic band-gap (EBG).

目錄

封面內頁
簽名頁
授權書．．．．．．．．．．．．．．．．．．．．．．．．．iii
中文摘要．．．．．．．．．．．．．．．．．．．．．．．．iv
英文摘要．．．．．．．．．．．．．．．．．．．．．．．． v
致謝．．．．．．．．．．．．．．．．．．．．．．．．．．vii
目錄．．．．．．．．．．．．．．．．．．．．．．．．．．viii
圖目錄．．．．．．．．．．．．．．．．．．．．．．．．． x
表目錄．．．．．．．．．．．．．．．．．．．．．．．．．xii

第一章　緒論
1.1 前言．．．．．．．．．．．．．．．．．．．．1
1.2 研究動機．．．．．．．．．．．．．．．．．．2
1.3 研究目的．．．．．．．．．．．．．．．．．．4
第二章　設計多頻天線
2.1 單頻天線．．．．．．．．．．．．．．．．．．5
2.2 雙頻天線．．．．．．．．．．．．．．．．．．7
2.2.1 探討外環架構參數影響．．．．．．．．．．．10
2.2.2 增加外環長度對天線的影響．．．．．．．．．14
2.3 三頻天線．．．．．．．．．．．．．．．．．．18
第三章　EBG天線架構
3.1 EBG種類．．．．．．．．．．．．．．．．．．22
3.2 探討EBG架構對天線的影響．．．．．．．．．24
3.3 探討EBG對頻寬的影響．．．．．．．．．．．27
第四章　模擬與實作
4.1 三頻天線的模擬與實作．．．．．．．．．．．29
4.2 EBG結構的模擬與實作．．．．．．．．．．．．34
第五章　總結與未來之研究．．．．．．．．．．．．．．．．39
參考文獻．．．．．．．．．．．．．．．．．．．．．．．．40

[1]S. Zhu, “Dual-Band Wearable Textile Antenna on an EBG Substrate,” IEEE Trans. Antennas and Propagation., vol. 57, no. 4, Apr. 2009.
[2]X. Daoxian, O. B. Leong, and Z. G. Dept, “A New Triple-band Slot Antenna with EBG Feed,” Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications, 2005. MAPE 2005. IEEE International Symposium on., vol. 1, pp. 41-44, Apr 2005.
[3]L. Moustafa, M. Thevenot, T. Monediere,and B. Jecko, “Design method of EBG material with wide defect band,” Antennas and Propagation, 2009. EuCAP 2009. 3rd European Conference on .,pp. 3235-3239, 2009.
[4]A. R. B. Rocha and H. C. C. Femandes,“Dynamic method for antennas with PBG,” Twenty Seventlh International Conference onInfrared and Millimeter Waves, pp. 89-90, Sept. 2002.
[5]T. Jaffre, E. Rodes, M. Diblanc, and B. Jecko,“High frequencyantennas based on metallic electromagnetic band gap. Comparison withequivalent dielectric structures,” in JINA Int. Symp. Antennas, Nice, France, 2004.
[6]C. Cheype, C. Serier, M. Thevenot, T. Monediere, A. Reineix, and B. Jecko,“An electromagnetic band gap resonator antenna,” IEEE Trans. Antennas Propagat., vol. 50, pp. 1285-1290, 2002.
[7]T. Akalin, J. Danglot, O. Vanbesien, and D. Lippens,“A highlydirective dipole antenna embedded in a Fabry-Perot cavity,” IEEE Microwave Compo Lett., vol.12,2002.
[8]W. Kueathaweekun, P. Jearapraditkul, N. Anantrasirichai, O. Sangaroon, and T. Wakabayashi,“Wide-band CPW-fed Slot Antenna with Tuning Stub and π-Strip for WLAN/WiMAX Application,” Intelligent Signal Processing and Communications Systems, 2008. ISPACS 2008. International Symposium on ., pp.1-4, Feb. 2009.
[9]J. Y. Sze and K. L. Wong,“Bandwidth enhancement of a microstripline-fed printed wide-slot antenna,” IEEE Trans. Antennas Propag. vol. 49, pp. 1020-1024, Jul. 2001.
[10]W. Kueathaweedun, C. Benjangkaprasert, N. Anantrasirichai and T. Wakabayashi,“Microstrip-fed slot antenna with rectangular-shaped tuning stub,” proc. Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology(ECTI)International Conference, 2008.