[1] Arab, R., Villard, P., Goure, J.P.（1998）,”Large Deformations FEM Analysis of a Reinforced Earth Structure”, Proceedings of the 6th International Conference on Geosynthetic, Georgia, USA, pp. 597-600.
[2] Bassett, R.H. and Last, H.C.（1978）, “Reinforced Earth Below Fottings and Embankments”, Proceeding, Symposium on Reinforced Earth, ASCE, Pittsburgh, pp. 222-231.
[3] Bathurst, R.J., Hatami, K.（1998）,”Influence of Reinforcement Stiffness, Length and Base Condition on Seismic Response of Geosynthetic Reinforced Retaining Walls”, Proceedings of the 6th International Conference on Geosynthetic, Georgia, USA, pp. 613-616.
[4] Bonaparte, R., Holtz, R.D. and Giroud, J.P.（1987）, “Soil Reinforcement Design Using Geotextiles and Geogrids”, In Geotextile Testing and Design Engineer, ASTM STP 952, Philadephia, PA, pp. 69-116.
[5] British Standard Institute（1995）, Code of Practice for Strengthened/Reinforced Soils and Other Fills. BSI, London, BS8006.
[6] Broms, B.B.（1978）, ”Design of Fabric Reinforced Retaining Structures”, Proc. of the Symp. on Earth Reinforcements, ASCE, Pittsburgh, PA.
[7] Chou, N.N.S.（1992）,”Performance of Geosynthetic Reinforced Soil Walls”, Ph. D. thesis, Department of Civil, 33. Environmental and Architectural Engineering, University of Colorado, U. S. A..
[8] Collin, J.G.（1986）, “Earth Wall Design”, Doctoral Dissertation, University of California Berkeley.
[9] Duncan, J.M., Low, B.K., and Schaefer, V.R.（1985）, “STABGM, Microcomputer version, A Computer Orogram for Slope Stability Analysis of Reinforced Embankments and Slope”, Virginia Polytechnic Institute and state Vniversity.
[10] Ghinelli, A., Sacchetti, M.（1998）,”Finite Element Analysis of intrumented geogrid reinforced slope”, Proceedings of the 6th International Conference on Geosynthetic, Georgia, USA, pp. 649-654.
[11] Jewell, R.A. , Paine, N., and Woods, R.I.（1984）, “Design Methods of Steep Reinforced Embankments”, Symp. on Polymer Grid Reinforcement in Civil Engineering, ICE.
[12] Leshchinsky, D.（1994）, “Design Procedure for Geosynthetic Reinforced Steep Slopes”, Department of Civil Engineering University of Delaware Newark, DE19716.
[13] Leshinsky, D. and Perry, E.B.（1987）, “A Design Procedure for Geotextiles Reinforced Walls”, Proc. of the Geosythetics ’87 Conf., Vol. 1, New Orleans, pp. 95-107.
[14] Otani, J., Hirai, T., Ochiai, H., Shinowaki, S.（1998）,”Evaluation of Foundation Support for Geosynthetic Reinforced Soil Wall on Sloping Ground”, Proceedings of the 6th International Conference on Geosynthetic, Georgia, USA, pp. 601-604.
[15] Penman, J. and Austin, R.A.（1998）, ”A Comparison of Design Approaches for Geosynthetic Reinforced Soil Structures In Europe”, Proceedings of the 6th International Conference on Geosynthetic, Georgia, USA, pp. 501-506.
[16] Schmertmann, G.R., Chouery-Curtis, V.E., Johnson, R.D., andBonaparte, R.（1987）, “Design Charts for Geogrid Reinforced Soil Slopes”, Proceedings of the Geosynthetics ’87 Conference, New Orleans, Vol.1, pp. 108-120.
[17] Steward, J.E., Williamson, R. and Mohney, J.（1977）, ”Earth Reinforcement ”, In Guideline for Use of Fabrics in Construction and Maintenance of Low-Volume Roads, USDA, Forest Service, Portland, Oregon.
[18] 方永壽、陳滄江、楊育智、湯程傑（2000），「集集大地震造成之擋土結構物破壞」，地工技術，第77期，pp. 87-92。[19] 台北市土木技師公會（1998），加勁擋土結構設計及施工手冊。
[20] 沈茂松（1996），實用土壤力學試驗，文笙書局，增訂第五版。
[21] 李咸亨、謝宗榮（1997），「加勁土壤構造力學行為之非線性分
析」，第七屆大地工程學術研討會。
[22] 林三賢（1999），「地工合成材五種設計規範之比較」，地工技術，第71期，pp. 43-46。[23] 陳榮河、林三賢（2000），加勁土壤結構應用於崩塌公路之研究（期末報告）。
[24] 陳榮河、陳天健、李怡先、王聖芳（1992），「加勁擋土牆設計與施工準則研究」，國道建設技術研討會論文集。
[25] 張達德、郭勝雄、陳天健（1990），「地工織物在加勁土壤之應用與設計考量」，地工技術，第32期。[26] 賴青建（1999），加勁邊坡分析與設計軟體研發，國立台灣海洋大學河海工程學系碩士學位論文。[27] 蔡攀鰲（1995），公路工程學，國立成功大學土木工程學系。
[28] 謝啟萬（1999），「地工合成材常用之檢測法簡介」，地工技術，第71期，pp.13-28。[29] 謝啟萬、陳雅萍（1999），台21線日月潭─水里改善計畫70K+200~10K+880及70K+100~70K+200道路改善工程地工加勁格網測試報告，國立屏東科技大學土木工程系營建暨水資源工程服務中心地工加勁格網測試報告書。