臺灣博碩士論文加值系統

現代人在辦公室的時間很長，有時候，為了職務的需要，甚至有機會必須要在辦公室度過幾個晚上，所以，能夠將辦公室的某一個區間，做好休息時間的準備，是辦公室的職員，心中的一個不容易達成的期待。另一方面，許多的研究也指出，在辦公室內的午間小休息，可以將後半天的工作效率，做出有效性的提升。所以，本研究的動機，就在於企劃與設計一組能夠滿足上述需求的設備。
在開始的企劃上，因為辦公室空間的限制，產生材積與位置上的疑慮。但是，在其他的相關設計裡，看到摺疊的概念，可以在空間與功能運用上，做出彈性的設計運作。所以，研究者先做摺疊躺床的商品現況調查，並以構想問卷來確認需求性。經過28 名職場人士的問卷確認，對於創新的平躺床功能儲藏文件功能以及置放午休配件的功能，都獲得支持。研究者再以 3D 的設計繪圖工具，做出與現有產品有所區別的創新性設計，並且定名此設計為：摺疊床櫃(Folding Cabinet and Bed, FCB)。此設計，在平時是結合於辦公室的周邊櫃，但是，在使用者認為需要的時候，可以將其打開，變形為單人使用的平躺床(午休床)，作為暫時或者長時間使用的躺床。
最後，進行此創新午休床的滿意度評價網路問卷，提供給目前上班中的各類型職員，評估此模型的設計屬性滿意度，包含三個部分：基本資料、設計屬性「重要度」評估、設計屬性「滿意度」評估。總計 50 位回答者給予意見，其中：27 位女性，23 位男性，平均年齡為 37.6 歲。八項設計屬性之「重要性」與「滿意度」的平均得分，都通過單一T 檢定(顯著大於 3 分) 。再以重複量數變異數分析(ANOVA)，「重要度」受到高度重視者為：「創新程度」、「實用便利性」、「結構設計」、以及「舒適程度」。以本設計的設計屬性「滿意度」上，則在「創新程度」的表現上，感到最滿意。
此研究結果，將提供給辦公室家具設計製造廠商參考，同時研究者也向消費者群體，介紹這種創新的設計導向產品。

Nowadays, people need to stay at office for a longer time than before. Sometimes, you may have to stay several nights in your office for business communication with other company abroad. If there is a small area that is located at office for members to stay comfortably for their busy hours, I believe, this wish might bring coworker into one good team than ever. From some articles said, also, a small rest at the afternoon could recover the performance of work. This study is to design and research a furniture for this issue.
In the first design stage, the concept is limited by the limited space of office and unclear of material. But research found that at the market of other product, some folding idea of products could be a good opportunity for this study. So, research drew a concept of Folding Cabinet and Bed (FCB), and ran a first survey of this idea to know whether it was accepted by consumers. Twenty-eight responders told that they agreed this idea of FCB. And then, researcher approach this concept and make the detail design of it. This FCB, kept under an office desk, and transformed it by the user into a bed type for user to rest on it.
After that, the detailed FCB drawings are printed in the second survey in the internet for gathering the opinions of more potential consumers. There are 50 respondent, 27 females and 23 males, with mean age of 37.6 years joint this satisfactory survey of design. An one-mean t-test tells that all of those eight items of design factors are important and satisfied by those subjects. By repeat measure of ANOVA, the significantly more important design factors are ‘well innovation’, ‘well convenience’, ‘well structure design’, and ‘well comfortable’. And the significantly most satisfied factor is ‘well innovation’ for our design which is rated by those subjects.
This design and research is supported to manufactories that interested in the topic and it is also hope to promote this issue for consumers.

誌謝 4
摘要 i
ABSTRACT ii
表目錄 v
圖目錄 vi
第一章 緒論 1
1.1研究背景與動機 1
1.2研究目的 1
1.3研究範圍與限制 2
1.4研究架構 3
第二章 文獻探討 5
2.1 辦公室午休的影響 5
2.2 床的設計考量因素 6
2.3 產品設計評價 10
2.4 產品滿意度調查 12
2.5 午休床的設計調查 14
2.5.1 使用類型分析表 20
2.5.2 市面上折疊床應用 22
第三章研究方法 23
3.1 創新午休床(FCB)設計構想調查 23
3.2 創新午休床(FCB)設計過程 28
3.3 創新午休床(FCB)設計滿意度調查 29
第四章 研究結果與討論 32
4.1 回答者資料 32
4.2 描述統計 33
4.3 推論統計 34
4.3.1 整體評價 34
4.3.2 不同特質回答者的評價 35
4.4 設計成果 36
4.5 研究討論 39
4.5.1 平躺的午休床 39
4.5.2 午休與儲藏功能 39
4.5.3 設計屬性的現象 40
第五章 結論與建議 41
5.1 研究結論 41
5.2 研究建議 42
參考文獻 44
中文部份 44
英文部份 44
附件(一)：「創新午休折疊收納床櫃」之設計構想問卷 48
附件(二)：「創新午休折疊收納床櫃」之設計滿意度問卷 51

伏佩玲，2010，整合消費者偏好與績效評估應用於除濕機家電產品開發設計之研究，樹德科技大學應用設計研究所，碩士論文，高雄市。
林逸群，2015，新產品設計與開發之設計構想評價之探討，銘傳大學創新設計與管理研究所，碩士論文，桃園市。
莊妙華，2000，網路商店使用智慧型店員對消費者購買意願影響之研究，國立中山大學資訊管理研究所，碩士論文，高雄市。
劉明德、梅國忠，2011，網站體驗行銷、體驗價值、顧客滿意度與顧客忠誠度關係之探討，行銷科學學報；第 7 卷，第 2 期，129 - 153。
鄧成連，1999，設計管理：產品設計之組織、溝通與運作，亞太圖書，台北市。
藍少堂，2011，購買動機與客戶滿意度對載購意願之影響-以自行車業為例，義守大學工業工程與管理研究所，碩士論文，高雄市。
藍康震，2014，數位化教學輔助設備產品使用者滿意度之研究-以互動式電子白板為例，銘傳大學商品設計研究所，碩士論文，桃園市。
Amzica, F. and Steriade, M. (1995). Short- and long-range neuronal synchronization of the slow (<1 Hz) cortical oscillation. J. Neurophysiol. 73, 20-38.
Backhaus, J. and Junghamms, K. (2006). Daytime naps improve procedural motor memory,leep Medicine, 7, 508-512.
Bader, G.G.and Engdal, S. (2000). The influence of bed firmness on sleep quality, Applied Ergonomics, 31, 487-497.
Cajochen, C., Knoblauch, V. and Wirz-Justice, A. (2004). Circadian modulation of equence learning under high and low sleep pressure conditions. Behav Brain Res, 151(1-2), 167-176.
DeVocht, J.W., Wilder, D.G., Bandstra, E.R. and Spratt, K.F. (2006). Biomechanical evaluation of four different mattresses, Applied Ergonomics, 37, 297-304.
Frederick, S., Richard, B. and Eric, M. (1998). Full-body interface pressure testing as a method for performance evaluation of clinical support surface, Applied Ergonomics, 29(6), 491-497.
Haynes, B.P., Suckley , L.and Nunnington, N. (2019). Workplace alignment:An evaluation of office worker flexibility and workplace provision, Facilities.
Huang, C.Y. and Wu, F.G. (2018). Design of an innovative mattress to improve sleep quality by increasing deep sleep time, Rebelo, F., Soares, M. (eds.) in Advances in Ergonomics in Design, Advances in Intelligent Systems and Computing. 780-785.
James, W. D., David, G. W. and Eric, R. (2006). Biomechanical evealuation of four diferent mattresses. Applied Ergonomics, 37(3), 297-304
Lahm, R. and Iaizzo, P.A. (2002). Physiologic responses during rest on a sleep system at varied degrees of firmness in a normal population. Ergonomics, 41, 798-815
Lee, H., Park, S. (2006). Quantitative effects of mattress types (comfortable vs.uncomfortable) on sleep quality through polysomnography and skin temperature International Journal of Industrial Ergonomics, 36, 943-949.
Li, Z. and Wang, C. (2000). Research on driver fatigue and ergonomics design of automobile, Machine Design and Manufacturing Engineering, 30(5), 12-14.
Mednick, S.C., Nakayama, K., Cantero, J.L., Atienza, M., Levin,A.A., Pathak, N., and Stickgold, R. (2002). The restrotive effect of naps on perceptual deterioration. Nat. Neurosci, 5, 677-681.
Min, Z. and Ning, T. (2010). Analysis of human factors in bed design. In Proceeding of 2010 IEEE 11th International Conference on Computer-Aided Industrial Design & Conceptual Design 1 ,595-597.
Oliver, R.L. (1999). Whence Consumer Loyalty. Journal of Marketing, 63, 33-34.
Rams, D. (1995). Weniger, aber besser: Less but better, Jo Klatt, Design+ Design Verlag.
Ray, J.D. (1991). Spine configuration associated with various sleep surfaces. IEEE Eng Med Biol Mag, 10(2): 33-36.
Rechtschaffen, A. and Kales, A. (1968). A manual standardized terminology, Techniques and Scoring System for Sleep Stages of Human Subjects (Bethesda, MD: U.S.Department of Health).
Rithalia, S., and Kenney, L. (2000). Mattresses and beds: reducing and relieving pressure. Nurs Times, 96(36 Suppl), 9-10.
Rosekind, M.R., Gander, P.H and Miller. D.L. (1994). Fatigue in operational settings:examples from the aviation environment. Hum. Factors 36: 327–38.
Shen, T.Y., Tan, S.H. and Wu, F.G. (2015). Comparison of sleep quality and thermal comfort for innovative mettress design, 6th International Conference on Applied Human Fators and Ergonomics (AHFE 2015) and the Affiliated Conferences, Procedia Manufacturing, 3, 5874-588.
Simon, H.A. (1973). The structure of Ill-structured problems, Artificial Intelligence, 4(3-4), 181-201.
Smith, S.S., Kilby, S., Jorgensen, G. and Douglas, A. (2007). Napping and nightshift work:effects of a short nap on psychomotor vigilance and subjective sleepiness in health workers, Sleep and Biological Rhythms, 5, 117-125.
Verhaert, V. (2009). Automatic posture recognition during sleep, In: Proceeding of the 17th world congress on ergonomics. 9-14 August, 2009. Beijing, International Ergonomics Association (IEA), CD ROM, 2PD0036.
Verhaert, V., Haex, B., Wilde, T.D., Berckmans, D., Verbraecken, J., Valck, E.D. and Sloten,J.V. (2011). Ergonomics in bed design: the effect of spinal alignment on sleep parameters, Ergonomics, 54(2), 169-178.
Walker, M. P. and Stickgold, R. (2004). Sleep dependent learning and memory consolidation, Neuron, 44, 121-133.