臺灣博碩士論文加值系統

串級控制是能夠提高單環路控制性能最成功的控制架構之一，這也使得串級控制被廣泛的應用在化學工業中。本研究提出串級控制基於模式法和直接基於數據法之PID控制器設計，藉由一次閉環路階梯測試就可同時完成主控制器與次控制器調諧。
在基於模式法設計PID控制器時，程序模式在一開始就被識別出來，接著兩個控制器利用內部模式控制(internal model control, IMC)方法完成調諧。在考慮串級控制基本概念下，次控制器被設計成快速排除擾動。並且在不需要額外實驗下，根據次控制器設計完成後，基於內環路的實際動態行為進行識別等效程序的模式識別，並且設計主控制器。而系統之韌性問題也在控制器調諧過程中被加入考慮，進而對IMC調諧參數的選擇制定明確的方向。
基於模式之PID控制器設計方法在高階程序的性能會下降，其原因為高階程序動態識別成低階模式時產生不可避免的建模誤差所造成。因此，在不訴諸於程序模式下，直接以基於一組程序輸入及輸出數據設計PID控制器，這是一個很吸引人的替代方法。直接基於數據的PID控制器設計中，設計的目標是要找到一組PID控制器參數，使內環路與外環路的動態行為盡可能貼近所指定的參考模式，而參考模式是參照基於模式設計方法為相同的設計目標。因此便能得到與建議的設計方法有關之最佳化問題。基於兩個可調參數的選擇提出一個明確規範，便能各自處理內環路和外環路的性能與韌性間權重問題，以達到所想要系統的韌性水平。
模擬範例證實本研究所提出兩種串級控制系統之PID設計方法的有效性。結果呈現，在基於數據法是能夠達到與基於模型法相當或是更好的控制性能。

Cascade control is one of the most successful control structures for enhancing single-loop control performance, which has lead to the extensive implementation of cascade control in chemical process industries. This study presents model-based and direct data-based PID controller design approaches for cascade control systems in which both primary and secondary controllers are tuned simultaneously using a single closed-loop step test.
In the model-based PID controller design, the process models are first identified, and then the two PID controllers are tuned using an internal model control (IMC) approach. Considering the rationale of cascade control, the secondary controller is designed for faster disturbance attenuation. Without requiring an additional experiment, the primary controller is designed based on an identified process model that accurately accounts for inner loop dynamics. The robustness considerations are included in the controller tuning process to develop explicit guidelines for the selection of the IMC tuning parameters.
The performance of model-based PID design methods would degrade for higher-order process dynamics owing to the inevitable modeling error. Consequently, it is an attractive alternative to design PID controllers directly based on a set of process input and output data without resorting to process models. In the direct data-based PID controller design, the design goal is to find PID parameters such that the resulting inner and outer loops behave as closely as possible to the appropriately specified reference models which are developed from model-based design. The optimization problems pertaining to the proposed design are derived. The desired levels of system robustness explicitly guide the selection of two adjustable parameters to deal with the trade-off between performance and robustness for inner and outer loops independently.
Simulation examples confirm the effectiveness of two proposed PID design approaches for cascade control systems. The results show that the data-based method is able to achieve comparable or better control performance than the model-based method.

目 錄

摘　要 i
ABSTRACT iii
誌 謝 v
目 錄 vi
表目錄 viii
圖目錄 x
第一章 緒論 1
1.1 前言 1
1.2 文獻回顧 2
1.3 研究動機 3
1.4 章節組織 4
第二章 基於模式法設計PID控制器 5
2.1 程序識別 5
2.1.1 以Laplace transform轉頻率響應 6
2.1.2 識別程序的轉移函數 6
2.1.3 低階程序模式計算 7
2.2 設計PID控制器 10
2.2.1 設計次控制器 11
2.2.2 設計主控制器 13
2.2.3 以韌性為考量選擇調諧參數 16
2.3 並聯式串級控制器設計 18
2.3.1 程序識別 19
2.3.2 設計控制器 20
2.4 基於模式法設計PID控制器流程 22
第三章 基於數據法設計PID控制器 24
3.1 PID控制器設計 24
3.1.1 設計次控制器 25
3.1.2 設計主控制器 29
3.2並聯式串級控制器設計 32
3.3基於數據法設計PID控制器流程 35
第四章 實例應用模擬 37
4.1 研究範例一 一階帶時延程序 37
4.2 研究範例二 二階帶時延程序 45
4.3 研究範例三 高階程序 50
4.4 研究範例四 高階程序 56
4.5 研究範例五 夾套式CSTR系統 62
4.6 研究範例六 並聯式串級控制 68
第五章 總結與未來展望 74
5.1 結論 74
5.2 未來展望 74
參考文獻 75
附錄 77
符號彙編 80
 

[1] D. E. Seborg, T. F. Edgar, D. A. Mellichamp, Process Dynamics and Control, 2nd Ed., USA: John Wiley and Sons, 2004, pp.412-414.
[2] V. M. Alfaro, R. Vilanova, O. Arrieta, "Robust tuning of two-degree-of-freedom (2-DoF) PI/PID based cascade control systems," J. Process Control, Vol. 19, 2009, pp.1658-1670.
[3] I. Kaya, "Improving performance using cascade control and a Smith predictor," ISA Trans., Vol. 40, 2001, pp.223-234.
[4] I. Kaya, N. Tan, D. P. Atherton, "Improved cascade control structure for enhanced performance," J. Process Control, Vol. 17, 2007, pp.3-16.
[5] T. Liu, D. Gu, W. Zhang, "Decoupling two-degree-of-freedom control strategy for cascade control systems," J. Process Control, Vol. 15, 2005, pp.159-167.
[6] S. Vivek and M. Chidambaram, "Cascade controller tuning by relay auto tune method," J. Indian Inst. Sci., Vol. 84, 2004, pp.159-167.
[7] A. Leva and F. Donida, "Autotuning in cascaded systems based on a single relay experiment," J. Process Control, Vol. 19, 2009, pp.896-905.
[8] U. Mehta and S. Majhi, "On-line identification of cascade control systems based on half limit cycle data," ISA Trans., Vol. 50, 2011, pp.473-478.
[9] S. Song, W. Cai, Y. G. Wang, "Auto-tuning of cascade control systems," ISA Trans., Vol.42, 2003, pp.62-72.
[10] K. K. Tan, T. H. Lee, R. Ferdous, "Simultaneous online automatic tuning of cascade control for open loop stable processes," ISA Trans., Vol. 39, 2000, pp.233-242.
[11] A. Visioli and A. Piazzi, "An automatic tuning method for cascade control systems," Proc. IEEE Int. Conf. on Control Applications, Munich, Germany, 2006, pp.2968-2973.
[12] M. Veronesi and A. Visioli, "Simultaneous closed-loop automatic tuning method for cascade controllers," IET Control Theory Appl., Vol. 5, pp.263-270.
[13] Y. Lee, S. Park, M. Lee, "PID controller tuning to obtain desired closed loop responses for cascade control systems," Ind. Eng. Chem., Vol. 37, 1998, pp.1859-1865.
[14] H. Huang, I. Chien, Y. Lee, G. Wang, "A simple method for tuning cascade cotrol systems," Chem. Eng. Comm., Vol. 165, 1998, pp.89-121.
[15] Y. Lee, S. Oh, S. Park, "Enhanced control with a general cascade control structure," Ind. Eng. Chem., Vol. 41, 2002, pp.2679-2688.
[16] Y. Lee, M. Skliar, M. Lee, "Analytical method of PID controller design for parallel cascade control," Journal of process, Vol. 16, 2006, pp.809-818.
[17] L. P. Russo, B. W. Bequette, "State-space versus input/output representations for cascade control of unstable systems," Ind. Emg. Chem. Res., Vol. 36, 1997, pp.89-121.
[18] H. Hjalmarsson, M. Gevers, S. Gunnarsson, O. Lequin, "Iterative feedback tuning: theory and applications," IEEE Control Syst., Vol. 18, 1998, pp.26-42.
[19] M. C. Campi, A. Lecchini, S. M. Savaresi, "Virtual reference feedback tuning: a direct approach for the design of feedback controllers," Automatica, Vol. 38, 2002, pp.1337-1346.
[20] S. Masuda, M. Kano, Y. Yasuda, G. Li, "A fictitious reference iterative tuning method with simultaneous delay parameter tuning of the reference model," Int. J. Innovative Computing, Information and Control, Vol. 6, 2010, pp.2927-2939.
[21] X. Yang, B. Xu, M. S. Chiu, "PID controller design directly from plant data," Ind. Eng. Chem. Res., Vol. 50, 2011, pp.1352-1359.
[22] J. H. Park, H. I. Park, I. B. Lee, "Closed-loop on-line process identification using a proportional controller," Chem. Eng. Sci., Vol. 53, 1998, pp.1713-1724.