臺灣博碩士論文加值系統

本研究提出一種漸進多焦點鏡片光學檢測系統，此系統採用波前像差感測技術結合MATLAB軟體程式設計，應用於漸進多焦點鏡片之光學特性檢測。在光學設計學理中，三階像差及高階像差會使得人視覺上產生模糊、扭曲等成像品質問題，故本光學檢測系統以準直光路搭配Hartmann- Shack波前感測器作為感測元件，分別以不同廠牌的漸進多焦點眼鏡片，進行波前像差之量測實驗，並以Zernike多項式係數擬合方法，分別進行各種鏡片波前像差分析，評估不同廠牌漸進多焦點眼鏡片之可靠度及準確性，以解決鏡片品質異常的問題。本研究已成功開發一套可快速測定各種眼鏡片的光學檢測系統，協助視光產業建立漸進多焦點鏡片檢測技術，進而可評估各廠牌光學鏡片之製造品質。

This thesis is focused to develop a progressive addition lenses measuring system for evaluating the quality of the ophthalmic lens. The proposed measurement system used the Hartmann-Shack wavefront detection technology combined with MATLAB software operational interface design to evaluate various progressive addition lenses (PAL). In the optical design methodology, the excessively large third-order aberrations and higher-order aberrations may cause blurred or distorted image quality problems on human vision. This study will use Hartmann-Shack wavefront sensor and MATLAB software to evaluate different progressive addition lenses. The Zernike polynomial coefficient fitting was used to measure the third-order aberrations for various progressive addition lenses. We measure and compare the different progressive addition lenses to solve abnormal quality issues. This study developed an optical measurement system for fast evaluating the progressive addition lenses. The research results will apply to the ophthalmic lens testing and PAL products inspection with more high quality service.

摘要 i
Abstract ii
致謝 iii
目錄 iv
圖目錄 vi
表目錄 i
第一章 緒論 1
1.1 研究動機與目的 1
1.3 文獻探討 6
第二章 基本原理 13
2.1 光學像差 13
2.2 波前像差 15
2.3 Zernike多項式 16
第三章 光學量測系統開發 19
3.1 Shack-Hartmann 波前感測器 19
3.2 量測系統架構 22
3.3 量測分析流程 23
第四章 量測結果與分析 26
4.1 漸進多焦點眼鏡片波面像差量測 26
4.2 漸進多焦點眼鏡片Zernike波前重建與像差分析 42
第五章 結論 52
5.1 研究成果 52
5.2未來展望 53
參考文獻 54

[1] 李達人,"漸進多焦點鏡片與配戴者適應性之研究",中華醫事科技大學視光研究所碩士論文, 2014.
[2]黃敬堯,”評估漸進多焦點鏡片的兩種光學檢測技術比較,”科技學刊,第22 卷,第1期, 27-32, (2013).
[3]J. Sheedy, R. F. Hardy, J. R. Hayes, “Progressive addition lenses-measurement and ratings,” Optometry, Vol. 77, pp. 23-39 (2006).
[4]T. W. Raasch, L. Su, and A. Yi, “Whole-Surface Characterization of Progressive Addition Lenses,” Optometry and Vision Science, Vol. 88, No. 2, pp. E217–E226 (2011).
[5]C. Castellini, F. Francini, B. Tiribilli, “Hartmann test modification for measuring ophthalmic progressive lenses,” Appl. Opt. Vol. 33(19), pp. 4120- 4124 (1994).
[6]D. P. Salas-Peimbert, G. Trujillo-Schiaffino, J. A. Gonzalez-Silva, S. Almazan-Cuellar, “Simple Hartmann test data interpretation for ophthalmic lenses,” Rev. Sci. Instrum., Vol. 77, 043102 (2006).
[7]C. Zhou, W. Wang, K. Yang, X. Chai, and Q. Ron, “Measurement and comparison of the optical performance of an ophthalmic lens based on a Hartmann-Shack wavefront sensor in real viewing conditions,”Appl. Opt., Vol. 47 (34) pp. 6434-6441 (2008).
[8]D. Malacara, Optical Shop Testing, 3rd ed. (John Wiley& Sons, New York, 2007).
[9]M. Rottenkolber and H. Podbielska, “High precision Twyman–Green interferometer for the measurement of ophthalmic surfaces,”Acta Ophthalmol. Scand. Vol.74, pp. 348–353 (1996).
[10]C. Gonzalez, E. R. Villegas, L. Carretero, and A. Fimia,“Ronchi test for testing the powers of bifocal intraocularlenses,” Ophthal. Physiol. Opt. Vol.17, pp. 161–163 (1997).
[11]M. Rottenkolber and H. Podbielska, “Measuring ophthalmologicsurfaces by means of moiré deflectometry,” Opt. Eng. Vol.35, pp. 1124–1133 (1996).
[12]C. W. Fowler, “Technical note: apparatus for comparison of progressiveaddition spectacle lenses,” Ophthal. Physiol. Opt. Vol.26, pp. 502–506 (2006).
[13]M. D. Chidley, T. Tkaczyk, R. Kestera, M. R. Descoura, “Flow-induced birefringence: the hidden PSF killer in highperformance injection-molded plastic optics”, Proc. of SPIE, Vol. 6082, 60820E1-11 (2006).
[14]C. Y. Huang, T. W. Raasch, A. Y. Yi, M. A. Bullimore, “Comparison of Progressive Addition Lenses by Direct Measurement of Surface Shape, Optometry and Vision Science, Vol. 90 (6), pp.565-575 (2013).
[15]C. Y. Huang, “Measurement and comparison of progressive addition lenses by three techniques”, Master Thesis, College of Optometry, The Ohio State University, Columbus, Ohio, USA, pp.31–36(2011).
[16]T. W. Raasch, L. Su, A.Y. Yi, “Whole-surface characterization of progressive addition lenses”, Optom. Vis. Sci., Vol.88, pp.E217–226 (2011).
[17]T. W. Raasch, “Aberrations and spherocylindrical powers within subapertures of freeform surfaces”, J. Opt. Soc. AmericaA, Vol.28, pp.2642–2646 (2011).
[18]范乃中,”基於人工眼模型的隱形眼鏡波前像差量測系統研究”國立雲林科技大學電子與光電工程研究所碩士論文 (2012).
[19]B. C. Platt and R. Shack, “History and principles of Shack-Hartmann wavefront sensing”, J. Refract. Surg. Vol. 17(5), pp. S573-S577 (2001).
[20]R. R. Rammage, D. R. Neal, R. J. Copland, ”Application of Shack-Hartmann wavefront sensing technology to transmissive optic metrology,” Proc. of SPIE, Vol. 4779-27, pp. 1-12 (2002).
[21]F. Zernike, "Beugungstheorie des Schneidenverfahrens und Seiner Verbesserten Form, der Phasenkontrast methode" Physica, Vol. 1 (8), pp. 689–704 (1934).
[22]D. Malacara-Doblado and I. Ghozeil, “Hartmann, Hartmann-Shack, and other screen tests,” in Optical Shop Testing, 3rd ed., D. Malacara, ed. (John Wiley& Sons, New York, 2007), pp. 361-397.
[23]J. Wang and A. Gh. Podoleanu, “Real-time Depth-resolved Shack-Hartmann Measurements “, SPIE Vol. 8802, 88020B (2013).
[24]R. V. Shack, B. C. Platt, ”Production and use of a lenticular Hartmann screen”, J. Opt. Soc. Am. , Vol. 61, pp. 656-660 (1971).
[25]S. Groening, B. Sick, K. Donner, J. Pfund, N. Lindlein and J. Schwider, “Wave-front reconstruction with a Shack–Hartmann sensor with an iterative spline fitting method“, Applied Optics, Vol.39, No.4, pp. 561-567 (2000).
[26]林泓逸、王朝藝、田春林、李柏為、林漢傑,”漸進多焦點眼鏡片光學檢測系統開發” 2016光電與智慧電子研討會，pp. 31-34，健行科技大學 (2016).