臺灣博碩士論文加值系統

正交頻域多工 (orthogonal frequency division multiplexing，簡稱OFDM) 系統在高資料率多載波傳輸上擁有相當多的優點，尤其在無線通訊的應用上，主要因為其在傳播通道中具有抵抗散佈的能力。而正交頻率多工在硬體實現上主要缺點之一是傳輸信號會擁有較高的尖峰平均功率比 (peak-to-average power ratio，簡稱PAPR) 。這將會造成傳輸器的平均功率下降與傳輸範圍的減少，此乃因尖峰傳輸功率受到法規或應用上的限制而有一定範圍；且較高的尖峰平均功率比會增加類比數位轉換器與數位類比轉換器的複雜度。此外，為了避免副載波間之互調變干擾與頻帶外輻射，傳輸功率放大器必須操作在線性範圍內，而較高的尖峰平均功率比需要較大的線性範圍，也就需要較昂貴的裝置，因此限制了工業上的廣泛應用。在此之前所提出來降低尖峰平均功率比的技術，可分做三類：信號失真，符號加擾，以及編碼。而編碼技術是使用一個特別的前向錯誤更正碼，使得有較大尖峰平均功率比的符號不包含在碼中而不會被傳送，先前文獻上所有為降低尖峰平均功率比使用的編碼技術，都只限於區段碼。而在本篇論文中，我們將特別著重在迴旋碼對於降低尖峰平均功率比的方法。這是由於迴旋碼擁有規則的格狀結構，可以很容易地利用斐特比演算法來解碼；此外，一般的迴旋碼早已應用在正交頻率多工系統中。最後我們並提出一個建構迴旋碼的方式來降低尖峰平均功率比。

One of the disadvantages of orthogonal frequency division
multiplexing (OFDM) systems is that OFDM signals may have high
peak-to-average power ratio (PAPR). All the previously proposed
approaches which deal with this problem employ block codes. In
this thesis, we propose terminated convolutional codes for
reduction of the PAPR. In addition, we add an offset sequence to
all the codewords so that the PAPR of the code can be decreased.
The constructed convolutional codes have low PAPR and acceptable
rate and are easy to decode by the Viterbi algorithm.

摘要……………………………………………………………1
致謝……………………………………………………………2
目錄……………………………………………………………3
附錄 英文論文本……………………………………………4

[1] J. A. Davis and J. Jedwab, ”Peak-to-mean power control in OFDM, Golay complementary sequences, and Reed-Muller codes,” IEEE Trans. Inform. Theory, vol. 45, pp. 2397-2417, Nov. 1999.
[2] J. A. Davis and J. Jedwab, ”Peak-to-mean power control and error correction for OFDM transmission using Golay sequences and Reed-Muller codes,” Electron. Lett., vol. 33, pp. 267-268, Feb. 1997.
[3] K. G. Paterson, ”Generalized Reed-Muller codes and power control in OFDM modulation,” IEEE Trans. Inform. Theory, vol. 46, pp. 104-120, Jan. 2000.
[4] C. R¨oßsing and V. Tarokh, ”A construcion of OFDM 16-QAM sequences having low peak powers,” IEEE Trans. Inform. Theory, vol. 47, pp. 2091-2094, July 2001.
[5] C. V. Chong and V. Tarokh, ”A simple encodable/decodable OFDM QPSK code with low peak-to-mean envelope power ratio,” IEEE Trans. Inform. Theory, vol. 47, pp. 3025-3029, Nov. 2001.
[6] C. V. Chong and V. Tarokh, ”A simple encodable/decodable OFDM QPSK code with low peak-to-mean envelope power ratio,” in Proc. IEEE Int. Symp. Inform. Theory, Washington, DC, June 2001, pp. 315.
[7] A. E. Jones and T. A. Wilkinson, ”Performance of Reed-Muller codes and a maximumlikelihood decoding algorithm for OFDM,” IEEE Trans. Comm., vol. 47, pp. 949-952, July 1999.
[8] T. A. Wilkinson and A. E. Jones, ”Minimisation of the peak to mean envelope power ratio of multicarrier transmission schemes by block coding,” in Proc. IEEE Vehicular Technology Conf., Chicago, IL, July 1995, pp. 825-829.
[9] R. van Nee, and R. Prasad, OFDM for Wireless Multimedia Communications, Boston: Artech House, 2000.
[10] R. van Nee, ”OFDM codes for peak-to-average power reduction and error correction,” in Proc. IEEE Globecom, London, U.K., Nov. 1996, pp. 740-744.
[11] A. J. Grant and R. van Nee, ”Ecient maximum likelihood decoding of peak power limiting codes for OFDM,” in Proc. IEEE Vehicular Technology Conf., Ottawa, Ontario, Canada, May 1998, pp. 2081-2084.
[12] A. J. Grant and R. van Nee, ”Ecient maximum-likelihood decoding of Q-ary modulated Reed-Muller codes,” IEEE Commun. Lett., vol. 2, pp. 134-136, May 1998.
[13] X. Li and L. J. Cimini, ”Eects of clipping and filtering on the performance of OFDM,” IEEE Commun. Lett., vol. 2, pp. 131-133, May 1998.
[14] J. Armstrong, ”New OFDM peak-to-average power reduction scheme,” in Proc. IEEE Vehicular Technology Conf., Rhodes Island, Greece, May 2001, pp. 756-760.
[15] R. van Nee and A. de Wild, ”Reducing the peak-to-average power ratio of OFDM,” in Proc. IEEE Vehicular Technology Conf., Ottawa, Ontario, Canada, May 1998, pp. 2072-2076.
[16] V. Tarokh and H. Jafarkhani, ”On the computation and reduction of the peak-to-average power ratio in multicarrier communications,” IEEE Trans. Comm., vol. 48, pp. 37-44, Jan. 2000.
[17] K. G. Paterson and V. Tarokh, ”On the existence and construction of good codes with low peak-to-average power ratios,” IEEE Trans. Inform. Theory, vol. 46, pp. 1974-1987, Sept. 2000.
[18] K. G. Paterson and V. Tarokh, ”On the existence and construction of good codes with low peak-to-average power ratios,” in Proc. IEEE Int. Symp. Inform. Theory, Sorrento,
Italy, June 2000, pp. 217.
[19] V. Tarokh and H. Jafarkhani, ”An algorithm for reducing the peak to average power ratio in a multicarrier communications system,” in Proc. IEEE Vehicular Technology
Conf., Houston, TX, May 1999, pp. 680-684.
[20] C. Tellambura and M. G. Parker, ”Relationship between Hamming weight and peak-to-mean envelope power ratio of orthogonal frequency division multiplexing,” in Proc.
IEEE Int. Symp. Inform. Theory, Lausanne, Switzerland, June 2002, pp. 245.
[21] M. C. Chiu and H. S. Chen, ”Reduction of the peak to average power ratio in OFDM systems with convolutional codes,” in Proc. IEEE Int. Symp. Inform. Theory, Lausanne, Switzerland, June 2002, pp. 246.
[22] R. W. B¨auml, R. F. H. Fischer and J. B. Huber, ”Reducing the peak-to-average power ratio of multicarrier by selected mapping,” Electron. Lett., vol. 32, pp. 2056-2057, Oct. 1996.
[23] M. Breiling, S. H. M¨uller-Weinfurtner and J. B. Huber, ”SLM peak-power reduction without explicit side information,” IEEE Commun. Lett., vol. 5, pp. 239-241, June 2001.
[24] N. Carson and T. A. Gulliver, ”Peak-to-average power ratio reduction of OFDM using repeat-accumulate codes and selective mapping,” in Proc. IEEE Int. Symp. Inform. Theory, Lausanne, Switzerland, June 2002, pp. 244.
[25] S. H. M¨uller and J. B. Huber, ”OFDM with reduced peak-to-average power ratio by optimum combination of partial transmit sequences,” Electron. Lett., vol. 33, pp. 368-369, Feb. 1997.
[26] C. Tellambura and A. D. S. Jayalath, ”PAR reduction of an OFDM signal using partial transmit sequences,” in Proc. IEEE Vehicular Technology Conf., Atlantic, NJ, Oct. 2001, pp. 465-469.