跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.41) 您好!臺灣時間:2026/01/13 23:57
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:魏睿男
研究生(外文):Juei-Nan Wei
論文名稱:整合田口方法與損益平衡分析於最佳化太陽能晶片之厚度特性
論文名稱(外文):Optimizing the Thickness Characteristics the of Solar Chip by Integrating Taguchi Method and Break-even Analysis
指導教授:胡黃德胡黃德引用關係
指導教授(外文):Huang-Der Hu
口試委員:鍾雲恭洪振創
口試委員(外文):Yun-Kung ChungCheng-Chuang Hon
口試日期:2013-06-26
學位類別:碩士
校院名稱:元智大學
系所名稱:工業工程與管理學系
學門:工程學門
學類:工業工程學類
論文種類:學術論文
論文出版年:2013
畢業學年度:101
語文別:中文
論文頁數:81
中文關鍵詞:太陽能晶片損益平衡點田口方法敏感度分析
外文關鍵詞:Solar ChipBreak-even PointTaguchi MethodsSensitivity Analysis
相關次數:
  • 被引用被引用:8
  • 點閱點閱:2500
  • 評分評分:
  • 下載下載:200
  • 收藏至我的研究室書目清單書目收藏:1
隨著全世界環保意識的高漲及溫室效應所造成的自然災害日益嚴重,突顯出以太陽能這種潔淨能源發電的重要性將日益提高。太陽能相關的產品目前在市場上已開有始逐漸上揚的訂單需求。為了提高公司的營收,各太陽能工廠無不想盡辦法持續提高現有產品之生產良率。本研究以太陽能晶片產品之退貨不良率為主要改善方向,同時利用損益平衡法協助找出了不良率改善之臨界點與不良率改善幅度,並確定了太陽能之晶片厚度為本文此次之主要改善對象。本研究並且藉由田口方法與敏感度分析之搭配,以快速有效的實驗安排及分析過程亦大大的縮短了改善時程。研究案例在短時間內獲得良好之晶片厚度品質改善,把晶片厚度不良率從0.83% 降為0.36%,並減少每年約1,785,000元之退貨損失。
With the rising environmental awareness around the world and the greenhouse effect caused by natural disasters, the importance of the clean solar energy has gained the attention. The market of the solar energy products has gradually increased in various demands. In order to improve the company's profits, the solar plants have tried to improve the yields of existing products. The study subject was the characteristic of thickness of the solar chip. In this study, the defect ratio of customer return was evaluated. Moreover, the break-even analysis was used to find out the critical point of defect ratio and the product improvement range. The effective experimental arrangement of Taguchi methods and sensitivity analysis methods was used to improve the quality of thickness of the solar chip. The defect ratio of the thickness of solar chip has reduced from 0.83% to 0.36%, and the customer return loss has decreased by an amount of 1,785,000 dollars per year.
目錄
中文摘要 i
ABSTRACT ii
誌謝 iii
目錄 iv
圖目錄 v
表目錄 vi
第一章 緒論 1
1.1 研究背景 1
1.2 研究動機 2
1.3 研究目的 2
1.4 研究流程 3
第二章 文獻探討 5
2.1 損益平衡分析 5
2.2 田口方法 10
2.3 敏感度分析 17
第三章 研究方法 19
3.1 太陽能電池 19
3.1.1 太陽能電池之發電原理 20
3.1.2 太陽能電池之種類 20
3.1.3 晶體硅太陽能電池之生產流程 27
3.2 研究方法介紹 28
第四章 案例研究及結果討論 30
4.1 問題描述 30
4.2 分析流程之應用 31
第五章 結論與建議 47
參考文獻 48
附錄一 51
參考文獻
[1] 太陽能研究主題網, (http://web2.ctsh.hcc.edu.tw/stu100/s10011331/public_html/research.htm)
[2] 張金男, 張正忠. (2001) 會計管理與經營分析. 誠宏企管叢書.
[3] 林祝英. (1993) 管理會計. 三民書局.
[4] 洪源伸, “企業經營損益策略評估模型之建購-以製革產業為例,” 碩士論文, 工業工程與系統管理研究所, 逢甲大學, 2011.
[5] 蘇朝墩. (2006) 品質工程. 中華民國品質學會.
[6] 李輝煌. (2004) 田口方法:品質設計的原理與實務. 高立圖書有限公司.
[7] 黃政喻, “顧客滿意度與交貨延遲對訂單式生產系統接單決策之影響,” 碩士論文, 工業工程與管理系, 朝陽科技大學, 2009.
[8] 簡禎富. (2005) 決策分析與管理. 雙葉書廊.
[9] 簡禎富, 林明田, 吳奇昌. (2005) 瓶頸機臺管制-應用敏感度分析. 決策分析研討會.
[10] 林基源. (2004) 決策與人生. 遠流出版社.
[11] 林仲璋, “以作業方案分析評選效益後勤實施方案,” 碩士論文, 工業管理系, 臺灣科技大學, 2010.
[12] 中華太陽能聯誼會, (http://www.solar-i.com/know.html)
[13] 太陽能光電資訊網, (http://solarpv.itri.org.tw/aboutus/sense/history.asp)
[14] 科技產業資訊室, (http://cdnet.stpi.org.tw/techroom/market/energy/energy022.htm)
[15] 慶聲科技股份有限公司, (http://www.kson.com.tw/chinese/e_newspaper.htm)
[16] 綠能科技股份有限公司, (http://www.getinc.com.tw/)
[17] 金子剛, “N719染料吸附於斜角蒸鍍二氧化鈦薄膜模式影響染料敏化太陽能電池光電轉換效率,” 碩士論文, 材料科學與工程學系, 東華大學, 2012.
[18] 劉智生, 洪儒生, “太陽能電池的高效率化,” 科學發展, 439期, 頁60-65, 2009.
[19] 林政緯, “使用磷擴散吸雜法改善多晶矽太陽能電池效率,” 碩士論文,電子工程研究所, 中原大學, 2010.
[20] 沈昌宏, 謝嘉民, “可撓式矽薄膜太陽能電池,” 奈米通訊, 4期, 頁12, 2010.
[21] 林仁喜, “蛋雞產業經濟效益分析,” 碩士論文, 財金所, 雲林科技大學, 2006.
[22] 張嘉成, “晶達光電公司的產品策略,” 碩士論文, 高階經理研究所, 銘傳大學, 2003.
[23] 李美珍, “桃竹苗區大專校院財務結構與損益兩平分析,” 碩士論文, 經營管理研究所, 萬能科技大學, 2003.
[24] 方守誠, ”交通電子票證公司損益兩平發卡規模之研究,” 在職專班碩士論文, 運輸物流組, 交通大學, 2008.
[25] 薛繼祖, “本國銀行資金運用之研究-以損益兩平觀點,” 在職專班碩士論文, 國際財務金融研究所, 臺北大學, 2007.
[26] Atkinson, Banker, Kaplan, and Young, Management Accounting, Prentice Hall Inc., 1995.
[27] Ekren O., Ekren B. Y. and Ozerdem B., “Break-even analysis and size optimization of a PV/wind hybrid energy conversion system with battery storage – A case study,” Applied energy, Vol. 86, Issues 7-8, pp. 1043–1054, 2009.
[28] Kok A.G. de, Donselaar K.H. van and Woense T. van, “A break-even analysis of RFID technology for inventory sensitive to shrinkage,” International Journal of Production Economics, Vol. 112, Issue 2, pp. 521–531, 2008.
[29] Clemen, R.T, Reilly, T., Making Hard Decisions with Decisiontools suite, Duxbury/Thomson Learning Inc., 2000.
[30] Bergimann R. B., Rinke T. J., Berge C., Schmidt J. and Wemer J. H., “Advances in monocrystalline Si thin-film solar cells by layer transfer”, Solar Energy Materials and Solar Cells, Vol. 74, Issues 1-4, pp. 213-218, 2001.
[31] Yamamoto K., Yoshimi M., Suzuki T., Tawada Y., Okamoto T., Nakajima A. and Lgari S., “Thin film poly-Si solar cell on glass substrate fabricated at low temperature”, Applied Physics A, Vol. 69, Issue 2, pp. 179-185, 1998.
[32] O’regan, B., and Grazel, M., “A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 film,” Nature, vol. 353, pp. 737-740, 1991.
[33] Gratzel, M., “The advent of mesoscopic injection solar cell”, Progress in Photovoltaics, vol. 14, pp. 429-442, 2006.
連結至畢業學校之論文網頁點我開啟連結
註: 此連結為研究生畢業學校所提供,不一定有電子全文可供下載,若連結有誤,請點選上方之〝勘誤回報〞功能,我們會盡快修正,謝謝!
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top